ERJ-S06F1330V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F1330V is a 133 Ohm ±1% 0.125W (1/8W) chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The part is active and in production. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct functional interchangeability in circuit designs.

Substiute Parts

ERJ-S06F1330V

Panasonic Electronic ComponentsIn Stock: 849ERJ-S06F1330V Datasheet

Current PartRFQ

ERJ-6ENF1330V

Panasonic Electronic ComponentsIn Stock: 56279ERJ-6ENF1330V Datasheet

SimilarRFQ

CRCW0805133RFKEA

Vishay DaleIn Stock: 21167CRCW0805133RFKEA Datasheet

SimilarRFQ

RC0805FR-07133RL

YAGEOIn Stock: 135388RC0805FR-07133RL Datasheet

SimilarRFQ

RMCF0805FT133R

Stackpole Electronics IncIn Stock: 30350RMCF0805FT133R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06F1330V are qualified based on the following criteria:

• Electrical Match: Resistance value of 133 Ohms with ±1% tolerance
• Power Rating: 0.125W (1/8W) minimum
• Package Compatibility: 0805 (2012 Metric) form factor with identical termination count (2 terminations)
• Mechanical Dimensions: Length 0.079" (2.00mm), Width 0.049" (1.25mm), with seated height within acceptable range
• Composition: Thick film construction
• Temperature Performance: Operating range -55°C ~ 155°C with ±100ppm/°C temperature coefficient
• Compliance: ROHS3 compliance and MSL 1 rating required
• Automotive Qualification: AEC-Q200 certification preferred for automotive applications

All identified substitutes meet these core parameters and are functionally equivalent for direct replacement in the same circuit application.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Automotive Applications)

For automotive and mission-critical applications requiring AEC-Q200 qualification, the following substitutes are directly equivalent:

• ERJ-6ENF1330V (Panasonic): Same manufacturer as primary part, identical electrical and mechanical specifications, AEC-Q200 qualified, higher inventory availability (56,203 pcs)
• CRCW0805133RFKEA (Vishay Dale): Established automotive supplier, AEC-Q200 qualified, lower seated height (0.020"), suitable for space-constrained PCB layouts
• RMCF0805FT133R (Stackpole Electronics): AEC-Q200 qualified, automotive-grade thick film construction, seated height 0.026"

Secondary Substitute (General Industrial Applications)

• RC0805FR-07133RL (YAGEO): Moisture-resistant thick film construction, all electrical parameters matched, suitable for non-automotive industrial applications where AEC-Q200 is not required

All substitutes maintain identical resistance, tolerance, power rating, package dimensions, and temperature performance. Selection should be based on application requirements, supply chain availability, and specific certifications needed for the end application.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF1330V replace ERJ-S06F1330V directly?

A: Yes. Both parts are manufactured by Panasonic with identical electrical specifications (133 Ohms ±1%), power rating (0.125W), package (0805), temperature range (-55°C ~ 155°C), and AEC-Q200 qualification. The parts are functionally equivalent for direct substitution.

Q: What is the difference between ERJ-S06F1330V and ERJ-6ENF1330V?

A: The primary difference is the series designation (ERJ-S06 vs. ERJ-6EN). The ERJ-S06F1330V includes anti-sulfur coating, while the ERJ-6ENF1330V does not specify this feature. All other electrical and mechanical parameters are identical.

Q: Is CRCW0805133RFKEA suitable for automotive applications?

A: Yes. CRCW0805133RFKEA is AEC-Q200 qualified and meets all automotive reliability requirements. The lower seated height (0.020" vs. 0.028") may be advantageous for compact PCB designs.

Q: Can RC0805FR-07133RL be used in automotive circuits?

A: RC0805FR-07133RL meets all electrical and mechanical specifications but does not carry AEC-Q200 certification. It is suitable for general industrial and consumer applications. For automotive applications requiring AEC-Q200 qualification, use ERJ-6ENF1330V, CRCW0805133RFKEA, or RMCF0805FT133R.

Q: Are all substitutes available in the same packaging format?

A: All substitutes are available in Tape & Reel (TR) packaging. CRCW0805133RFKEA is also available in Cut Tape (CT) & Digi-Reel format. Verify packaging requirements with your procurement specification before ordering.

Q: Do all substitutes have the same moisture sensitivity level?

A: Yes. All listed substitutes have MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage and handling.

Q: What is the maximum seated height variation among substitutes?

A: Seated height ranges from 0.020" (CRCW0805133RFKEA) to 0.028" (ERJ-S06F1330V and ERJ-6ENF1330V). For PCB designs with tight vertical clearance constraints, CRCW0805133RFKEA offers the lowest profile option.