ERJ-S06F1153V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F1153V is a 115 kOhms ±1% thick film chip resistor manufactured by Panasonic Electronic Components in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with anti-sulfur coating and automotive AEC-Q200 qualification. The part is currently active in production with 706 units in stock. Substitute parts are identified when design requirements necessitate alternative sourcing due to supply constraints, cost optimization, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

ERJ-S06F1153V

Panasonic Electronic ComponentsIn Stock: 770ERJ-S06F1153V Datasheet

Current PartRFQ

ERJ-6ENF1153V

Panasonic Electronic ComponentsIn Stock: 30795ERJ-6ENF1153V Datasheet

SimilarRFQ

CR0805-FX-1153ELF

Bourns Inc.In Stock: 25630CR0805-FX-1153ELF Datasheet

SimilarRFQ

CRCW0805115KFKEA

Vishay DaleIn Stock: 32031CRCW0805115KFKEA Datasheet

SimilarRFQ

RC0805FR-07115KL

YAGEOIn Stock: 128573RC0805FR-07115KL Datasheet

SimilarRFQ

RMCF0805FT115K

Stackpole Electronics IncIn Stock: 13902RMCF0805FT115K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F1153V is determined by strict equivalence across the following parameters: resistance value (115 kOhms), tolerance (±1%), power rating (0.125W), package format (0805), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (ROHS3, REACH Unaffected, EAR99). All identified substitute parts meet these core electrical and mechanical requirements. Variations in height-seated maximum dimension and specific feature sets (anti-sulfur versus moisture resistant) do not preclude substitution when the primary electrical parameters and package footprint are identical.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical equivalence to the ERJ-S06F1153V across resistance, tolerance, power rating, temperature coefficient, and operating temperature range. All parts are ROHS3 compliant, REACH unaffected, and classified under EAR99. Selection between substitutes should be based on application-specific requirements: parts with automotive AEC-Q200 certification (ERJ-6ENF1153V, CRCW0805115KFKEA, RMCF0805FT115K) are suitable for automotive and high-reliability applications; parts with moisture-resistant features (CR0805-FX-1153ELF, RC0805FR-07115KL) are appropriate for environments with elevated humidity exposure. Height-seated maximum dimensions vary between 0.020" and 0.028", which may influence PCB layout density in space-constrained designs. Inventory availability ranges from 706 to 128,524 units across all options.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S06F1153V be directly replaced with any of the listed substitutes? A: Yes. All listed parts are electrically and mechanically equivalent within the 0805 package format, with identical resistance (115 kOhms), tolerance (±1%), power rating (0.125W), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C).

Q: What is the difference between anti-sulfur and moisture-resistant features? A: Anti-sulfur coating protects against sulfur-containing atmospheric contaminants common in industrial environments. Moisture-resistant construction provides enhanced protection in high-humidity conditions. Both are protective measures; selection depends on the specific environmental exposure of the application.

Q: Are all substitutes suitable for automotive applications? A: Parts with automotive AEC-Q200 certification (ERJ-6ENF1153V, CRCW0805115KFKEA, RMCF0805FT115K) meet automotive qualification standards. Parts without this certification (CR0805-FX-1153ELF, RC0805FR-07115KL) are suitable for general industrial and consumer applications.

Q: Does the variation in height-seated maximum dimension affect PCB compatibility? A: Height variations (0.020" to 0.028") are within standard 0805 package tolerances and do not affect PCB footprint compatibility. However, in applications with tight vertical clearance constraints, the specific height dimension should be verified against design requirements.

Q: Are all parts available in Tape & Reel packaging? A: Yes. All listed parts are supplied in Tape & Reel (TR) format suitable for automated assembly processes.