ERJ-S06F1133V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F1133V is a 113 kOhms ±1% 0.125W chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in automotive and industrial environments. The part is currently active in production with 683 units in stock.

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating), mechanical compatibility (package size and form factor), and compliance certifications (AEC-Q200, RoHS3). These alternatives enable design flexibility and supply chain continuity when the primary part becomes unavailable.

Substiute Parts

ERJ-S06F1133V

Panasonic Electronic ComponentsIn Stock: 708ERJ-S06F1133V Datasheet

Current PartRFQ

ERJ-6ENF1133V

Panasonic Electronic ComponentsIn Stock: 65006ERJ-6ENF1133V Datasheet

SimilarRFQ

CRCW0805113KFKEA

Vishay DaleIn Stock: 22554CRCW0805113KFKEA Datasheet

SimilarRFQ

RC0805FR-07113KL

YAGEOIn Stock: 24867RC0805FR-07113KL Datasheet

SimilarRFQ

RMCF0805FT113K

Stackpole Electronics IncIn Stock: 4726RMCF0805FT113K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F1133V is determined by strict equivalence across the following parameters:

• Resistance value: 113 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.125W / 1/8W (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)
• Moisture sensitivity: MSL 1 (exact match required)

All identified substitute parts meet these criteria. Variations in physical height (seated maximum) and manufacturer-specific features (anti-sulfur coating, automotive AEC-Q200 qualification) do not disqualify substitution but should be noted for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and MSL 1 rating, confirming suitability for direct replacement in equivalent applications.

For automotive applications requiring AEC-Q200 qualification, the following parts are qualified: ERJ-6ENF1133V (Panasonic), CRCW0805113KFKEA (Vishay Dale), and RMCF0805FT113K (Stackpole Electronics Inc). The RC0805FR-07113KL (YAGEO) does not carry AEC-Q200 qualification and should be used only in non-automotive or non-qualified applications.

The ERJ-S06F1133V features anti-sulfur coating, which is not explicitly specified for all substitute parts. If anti-sulfur performance is a design requirement, verification with the substitute manufacturer is necessary.

Physical height variations (0.50mm to 0.70mm seated maximum) are within typical PCB assembly tolerances for 0805 packages and do not typically affect reflow soldering or component placement.

Frequently Asked Questions (FAQ)

Q: Can I use RC0805FR-07113KL as a direct replacement for ERJ-S06F1133V in automotive applications?

A: No. The RC0805FR-07113KL lacks AEC-Q200 automotive qualification. Use only in non-automotive applications or where automotive qualification is not required. For automotive designs, select from ERJ-6ENF1133V, CRCW0805113KFKEA, or RMCF0805FT113K.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All parts use the 0805 (2012 Metric) package with identical land pattern dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Variations in seated height (0.50mm to 0.70mm) do not affect footprint compatibility.

Q: What is the significance of the anti-sulfur coating on the ERJ-S06F1133V?

A: Anti-sulfur coating protects the resistor from sulfur-containing environmental contaminants that can degrade performance in harsh industrial or automotive environments. If this feature is critical for your application, confirm anti-sulfur specifications with the substitute manufacturer before selection.

Q: Do all substitute parts have the same temperature coefficient?

A: Yes. All parts listed have a temperature coefficient of ±100ppm/°C and operate across the identical temperature range of -55°C to 155°C.

Q: Which substitute part has the lowest profile?

A: The CRCW0805113KFKEA (Vishay Dale) has the lowest seated height at 0.020" (0.50mm), compared to 0.028" (0.70mm) for the ERJ-S06F1133V.