ERJ-S06F1132V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F1132V is a 11.3 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in harsh environments. The product is active and widely available. Substitute parts are necessary to address supply chain constraints, inventory availability, or specific application requirements while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	11.3 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F1132V is determined by strict equivalence across the following parameters:

Resistance value: 11.3 kOhms (exact match required)
Tolerance: ±1% (exact match required)
Power rating: 0.125W / 1/8W (exact match required)
Package: 0805 (2012 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature coefficient: ±100ppm/°C (exact match required)
Operating temperature range: -55°C ~ 155°C (exact match required)
RoHS compliance: ROHS3 Compliant (exact match required)
Moisture sensitivity: MSL 1 (exact match required)

All five substitute parts listed below meet these criteria. Variations in physical height, manufacturer-specific features (anti-sulfur vs. moisture resistant), and automotive certifications do not disqualify substitution but may influence selection based on application-specific requirements.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Features	Height (Max)	RoHS	MSL
ERJ-S06F1132V	Panasonic	11.3 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Anti-Sulfur, AEC-Q200	0.028" (0.70mm)	ROHS3	1
ERJ-6ENF1132V	Panasonic	11.3 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	0.028" (0.70mm)	ROHS3	1
CR0805-FX-1132ELF	Bourns Inc.	11.3 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Moisture Resistant	0.024" (0.60mm)	ROHS3	1
CRCW080511K3FKEA	Vishay Dale	11.3 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	0.020" (0.50mm)	ROHS3	1
RC0805FR-0711K3L	YAGEO	11.3 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Moisture Resistant	0.024" (0.60mm)	ROHS3	1
RMCF0805FT11K3	Stackpole Electronics Inc	11.3 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	0.026" (0.65mm)	ROHS3	1

Engineering Selection Recommendations

All substitute parts are active products with ROHS3 compliance and MSL 1 rating, confirming suitability for direct replacement in equivalent applications.

For automotive applications requiring AEC-Q200 qualification, select from: ERJ-6ENF1132V (Panasonic), CRCW080511K3FKEA (Vishay Dale), or RMCF0805FT11K3 (Stackpole Electronics Inc). These parts carry explicit AEC-Q200 ratings matching the original ERJ-S06F1132V specification.

For non-automotive applications or where moisture resistance is prioritized, CR0805-FX-1132ELF (Bourns Inc.) and RC0805FR-0711K3L (YAGEO) provide moisture-resistant thick film construction.

Physical height variations range from 0.020" to 0.028" maximum seated height. In space-constrained PCB designs, CRCW080511K3FKEA offers the lowest profile at 0.020" (0.50mm). Verify PCB layout clearances before final selection.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S06F1132V be replaced with any of these substitute parts without circuit redesign?

A: Yes. All substitute parts match the critical electrical parameters: 11.3 kOhms resistance, ±1% tolerance, 0.125W power rating, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. The 0805 package ensures mechanical compatibility with existing PCB footprints.

Q: What is the difference between anti-sulfur and moisture-resistant features?

A: Anti-sulfur coating (ERJ-S06F1132V) protects against sulfur-containing atmospheric contaminants common in industrial environments. Moisture-resistant construction (CR0805-FX-1132ELF, RC0805FR-0711K3L) provides protection against humidity and condensation. Both are valid thick film technologies; selection depends on environmental exposure conditions.

Q: Are all substitute parts suitable for automotive applications?

A: Only parts with explicit AEC-Q200 certification are qualified for automotive use: ERJ-6ENF1132V, CRCW080511K3FKEA, and RMCF0805FT11K3. CR0805-FX-1132ELF and RC0805FR-0711K3L lack automotive qualification and should not be used in automotive circuits without additional validation.

Q: Does the height difference between substitute parts affect PCB assembly?

A: Height variations (0.020" to 0.028" maximum) are within standard 0805 package tolerances and do not affect reflow soldering or component placement on standard pick-and-place equipment. Verify clearance only if the PCB design includes height-critical constraints above the component.

Q: Are all substitute parts RoHS compliant?

A: Yes. All parts listed are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity level), confirming compliance with current environmental and reliability standards.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message