ERJ-S06F1102V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F1102V is an 11 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring reliability in harsh environments. The part is active and in production. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct circuit board compatibility.

Key Parameters

Parameter	Value
Resistance	11 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
Dimensions	0.079" L x 0.049" W (2.00mm x 1.25mm)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts are grouped based on strict equivalence of the following parameters:

Resistance value: 11 kOhms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C to 155°C
Moisture sensitivity level: 1 (Unlimited)

Parts meeting all these criteria are direct substitutes. Parts with different power ratings (0.5W) or different compliance certifications are listed separately as they represent functional alternatives rather than direct equivalents.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	AEC-Q200	RoHS Status	Inventory (Pcs)
ERJ-S06F1102V	Panasonic	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	Yes	ROHS3	1027
ERJ-6ENF1102V	Panasonic	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	Yes	ROHS3	87834
CRG0805F11K	TE Connectivity	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	No	ROHS3	313284
AC0805FR-0711KL	YAGEO	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	Yes	ROHS3	5607
CR0805-FX-1102ELF	Bourns Inc.	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	No	ROHS3	40650
CRCW080511K0FKEA	Vishay Dale	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	Yes	ROHS3	44162
CRCW080511K0FKEAHP	Vishay Dale	11 kΩ	±1%	0.5	0805	±100ppm/°C	-55 to 155°C	Yes	ROHS3	9828
CRCW080511K0FKTA	Vishay Dale	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	Yes	RoHS non-compliant	14680
RC0805FR-0711KL	YAGEO	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	No	ROHS3	72858
RCS080511K0FKEA	Vishay Dale	11 kΩ	±1%	0.5	0805	±100ppm/°C	-55 to 155°C	Yes	ROHS3	3738
RMCF0805FG11K0	Stackpole Electronics	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	Yes	ROHS3	10846

Engineering Selection Recommendations

Direct electrical and mechanical equivalents to ERJ-S06F1102V with matching 0.125W power rating and ROHS3 compliance include ERJ-6ENF1102V (Panasonic), AC0805FR-0711KL (YAGEO), CRCW080511K0FKEA (Vishay Dale), and RMCF0805FG11K0 (Stackpole Electronics). All maintain AEC-Q200 automotive qualification except CRG0805F11K, CR0805-FX-1102ELF, and RC0805FR-0711KL, which are suitable for non-automotive applications.

Higher power-rated alternatives CRCW080511K0FKEAHP and RCS080511K0FKEA (0.5W) provide increased thermal margin in the same 0805 package and are applicable where circuit design permits higher power dissipation capability.

CRCW080511K0FKTA is not recommended due to RoHS non-compliance status, which may conflict with regulatory requirements in target applications.

Frequently Asked Questions (FAQ)

Q: Can CRCW080511K0FKEAHP (0.5W) replace ERJ-S06F1102V (0.125W) directly?

A: Yes, electrically and mechanically. The 0.5W part operates within the same temperature range and package dimensions. Higher power rating provides additional thermal margin without affecting circuit function. Verify PCB thermal design accommodates the substitute if power dissipation is a design constraint.

Q: What is the difference between ERJ-S06F1102V and ERJ-6ENF1102V?

A: Both are Panasonic 11 kOhms ±1% 0.125W 0805 resistors with identical electrical specifications and AEC-Q200 qualification. ERJ-6ENF1102V lacks the anti-sulfur feature of ERJ-S06F1102V but maintains equivalent performance in standard environments. ERJ-6ENF1102V has significantly higher inventory availability.

Q: Are non-AEC-Q200 parts suitable for automotive applications?

A: CRG0805F11K, CR0805-FX-1102ELF, and RC0805FR-0711KL lack AEC-Q200 certification. Use only in non-automotive circuits or where automotive qualification is not a design requirement. Verify application specifications before substitution.

Q: Do all substitute parts use the same packaging format?

A: All listed parts use 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 1.25mm W). Packaging format (Tape & Reel or Cut Tape) does not affect circuit board compatibility, only supply chain handling.

Q: What is the significance of Moisture Sensitivity Level 1?

A: MSL 1 indicates unlimited shelf life without moisture bake-out requirements. All listed parts share this specification, ensuring equivalent storage and handling procedures.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message