ERJ-S06F10R2V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F10R2V is a 10.2 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is currently in active production status with 972 units available in stock.

Equivalent and substitute parts are identified when design requirements permit component interchange due to matching electrical specifications, mechanical compatibility, and regulatory compliance. This reference provides qualified alternatives from multiple manufacturers that meet the same functional and environmental requirements.

Key Parameters

Parameter	Value
Resistance	10.2 Ohms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

Resistance value: 10.2 Ohms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Package format: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
RoHS compliance: ROHS3 Compliant
Moisture sensitivity: MSL 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical requirements. Variations in physical height and specific feature sets (such as anti-sulfur coating or automotive certification) are noted in the comparison table but do not preclude functional substitution when design constraints permit.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Height Max (mm)	Features	Ratings	Stock (Pcs)
ERJ-S06F10R2V	Panasonic	10.2 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.70	Anti-Sulfur	AEC-Q200	972
ERJ-6ENF10R2V	Panasonic	10.2 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.70	None specified	AEC-Q200	103501
CRCW080510R2FKEA	Vishay Dale	10.2 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.50	None specified	AEC-Q200	34958
RC0805FR-0710R2L	YAGEO	10.2 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.60	Moisture Resistant	None specified	16461
RMCF0805FT10R2	Stackpole Electronics	10.2 Ω	±1%	0.125	0805	±100ppm/°C	-55 ~ 155°C	0.65	None specified	AEC-Q200	4336

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and mechanical compatibility with the ERJ-S06F10R2V across the specified operating range. Selection among these alternatives should be based on:

Automotive Applications: ERJ-6ENF10R2V (Panasonic), CRCW080510R2FKEA (Vishay Dale), and RMCF0805FT10R2 (Stackpole Electronics) carry AEC-Q200 automotive qualification matching the original part specification.

Non-Automotive Applications: RC0805FR-0710R2L (YAGEO) provides equivalent electrical performance with moisture-resistant construction and is suitable for general industrial and consumer applications.

Regulatory Compliance: All substitute parts are ROHS3 compliant with MSL 1 rating, meeting the same environmental and handling requirements as the primary part.

Physical Constraints: Height variation ranges from 0.50mm to 0.70mm. Applications with strict PCB clearance requirements should reference the specific height specification of the selected substitute.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF10R2V be used as a direct replacement for ERJ-S06F10R2V?

A: Yes. Both parts are manufactured by Panasonic with identical electrical specifications (10.2 Ω ±1%, 0.125W, ±100ppm/°C), package format (0805), and operating temperature range (-55°C ~ 155°C). Both carry AEC-Q200 automotive qualification. The primary difference is the anti-sulfur coating feature present in the ERJ-S06F10R2V.

Q: Are there height differences between substitute parts?

A: Yes. The ERJ-S06F10R2V and ERJ-6ENF10R2V have a maximum seated height of 0.70mm, while CRCW080510R2FKEA measures 0.50mm, RC0805FR-0710R2L measures 0.60mm, and RMCF0805FT10R2 measures 0.65mm. Verify PCB clearance requirements before substitution.

Q: Which substitute part has the highest inventory availability?

A: ERJ-6ENF10R2V (Panasonic) has 103,501 units in stock, significantly exceeding availability of other alternatives.

Q: Can RC0805FR-0710R2L be used in automotive applications?

A: RC0805FR-0710R2L does not carry AEC-Q200 automotive qualification. Use this part only in non-automotive applications unless automotive qualification is not a design requirement.

Q: Do all substitute parts meet RoHS compliance?

A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental compliance profile of the ERJ-S06F10R2V.

Q: What is the significance of the anti-sulfur coating in ERJ-S06F10R2V?

A: The anti-sulfur feature is specified in the ERJ-S06F10R2V but not listed in the substitute parts. This coating provides protection against sulfur-containing atmospheric corrosion. If anti-sulfur protection is a design requirement, the ERJ-S06F10R2V or ERJ-6ENF10R2V should be prioritized.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message