ERJ-S06F1070V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F1070V is a 107 Ohm ±1% 1/8W (0.125W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur construction. The product is active and widely available. Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing, inventory constraints, or specific feature requirements such as different automotive certifications or moisture resistance profiles.

Substiute Parts

ERJ-S06F1070V

Panasonic Electronic ComponentsIn Stock: 982ERJ-S06F1070V Datasheet

Current PartRFQ

ERJ-6ENF1070V

Panasonic Electronic ComponentsIn Stock: 93846ERJ-6ENF1070V Datasheet

SimilarRFQ

CRCW0805107RFKEA

Vishay DaleIn Stock: 15740CRCW0805107RFKEA Datasheet

SimilarRFQ

RC0805FR-07107RL

YAGEOIn Stock: 12767RC0805FR-07107RL Datasheet

SimilarRFQ

RMCF0805FT107R

Stackpole Electronics IncIn Stock: 1115RMCF0805FT107R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06F1070V is determined by strict equivalence across the following parameters:

• Resistance value: 107 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Number of terminations: 2
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

All identified substitute parts meet these core electrical and mechanical parameters. Variations in physical dimensions (height-seated maximum) and specific feature sets (anti-sulfur vs. moisture resistant vs. standard automotive AEC-Q200) do not affect functional substitutability within the defined parameter space.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and MSL 1 rating, confirming their suitability for direct substitution in applications currently using the ERJ-S06F1070V.

ERJ-6ENF1070V (Panasonic) maintains identical specifications and dimensions to the main part, differing only in the absence of anti-sulfur designation. This part is suitable for applications where anti-sulfur protection is not a design requirement.

CRCW0805107RFKEA (Vishay Dale) offers the lowest seated height at 0.020" (0.50mm), making it advantageous for space-constrained PCB layouts while maintaining all electrical specifications.

RC0805FR-07107RL (YAGEO) features moisture-resistant construction without automotive AEC-Q200 rating. This part is suitable for non-automotive applications or where moisture resistance is prioritized over automotive certification.

RMCF0805FT107R (Stackpole Electronics Inc) maintains AEC-Q200 automotive rating with a seated height of 0.026" (0.65mm), providing an alternative automotive-qualified source.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF1070V replace ERJ-S06F1070V in automotive applications?

A: Yes. Both parts are Panasonic products rated AEC-Q200 with identical electrical and mechanical specifications. The primary difference is the absence of anti-sulfur designation on ERJ-6ENF1070V. If anti-sulfur protection is not specified in your design requirements, this substitution is valid.

Q: Is CRCW0805107RFKEA suitable for automotive use?

A: CRCW0805107RFKEA is rated AEC-Q200 and meets all electrical specifications. The lower seated height (0.020" vs. 0.028") may require PCB layout verification to ensure clearance compatibility, but electrical substitution is valid.

Q: What is the difference between RC0805FR-07107RL and the automotive-rated alternatives?

A: RC0805FR-07107RL is not rated AEC-Q200. It features moisture-resistant construction instead. This part is suitable for non-automotive applications or consumer electronics where automotive certification is not required.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All parts are supplied in Tape & Reel (TR) packaging and are compatible with standard SMD assembly equipment.

Q: Do the height differences between substitute parts affect PCB assembly?

A: Height variations range from 0.020" to 0.028" (0.50mm to 0.70mm). Verify your PCB design clearance specifications. Lower-profile parts such as CRCW0805107RFKEA may provide additional clearance margin in space-constrained designs.