ERJ-S06F1050V Equivalent & Substitute Parts

Part Overview

The ERJ-S06F1050V is a 105 Ohm ±1% 1/8W (0.125W) chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The part is active and in production, with 1032 units currently in stock.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across different manufacturers while preserving functional performance in the target application.

Substiute Parts

ERJ-S06F1050V

Panasonic Electronic ComponentsIn Stock: 1133ERJ-S06F1050V Datasheet

Current PartRFQ

ERJ-6ENF1050V

Panasonic Electronic ComponentsIn Stock: 44713ERJ-6ENF1050V Datasheet

SimilarRFQ

CRCW0805105RFKEA

Vishay DaleIn Stock: 17943CRCW0805105RFKEA Datasheet

SimilarRFQ

RC0805FR-07105RL

YAGEOIn Stock: 30953RC0805FR-07105RL Datasheet

SimilarRFQ

RMCF0805FT105R

Stackpole Electronics IncIn Stock: 25869RMCF0805FT105R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

• Resistance value: 105 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

All identified substitute parts meet these core electrical and mechanical specifications. Variations in physical height and specific feature sets (anti-sulfur vs. moisture resistant) do not affect functional interchangeability within the defined parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active production status and full ROHS3 compliance. Selection between the main part and substitutes should be based on:

Panasonic ERJ-6ENF1050V: Direct Panasonic alternative within the same manufacturer family. Maintains identical electrical specifications and package dimensions. Highest inventory availability (44,694 units). Lacks anti-sulfur feature present in ERJ-S06F1050V but retains AEC-Q200 automotive qualification.

Vishay Dale CRCW0805105RFKEA: Cross-manufacturer substitute with lowest seated height (0.020" / 0.50mm). Maintains AEC-Q200 automotive qualification and all electrical parameters. Suitable for space-constrained PCB layouts.

YAGEO RC0805FR-07105RL: Cross-manufacturer substitute featuring moisture-resistant composition. Does not carry AEC-Q200 rating but meets all core electrical and thermal specifications. Appropriate for non-automotive applications or where moisture resistance is prioritized over automotive qualification.

Stackpole Electronics RMCF0805FT105R: Cross-manufacturer substitute with AEC-Q200 automotive qualification. Seated height of 0.026" (0.65mm) provides intermediate profile. Maintains all electrical and compliance specifications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S06F1050V be replaced with ERJ-6ENF1050V?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (105 Ohms ±1%, 0.125W), operate across -55°C to 155°C, and carry ROHS3 compliance. The primary difference is the absence of anti-sulfur coating in ERJ-6ENF1050V, though both maintain AEC-Q200 automotive qualification.

Q: Are cross-manufacturer substitutes electrically equivalent?

A: Yes. CRCW0805105RFKEA (Vishay Dale), RC0805FR-07105RL (YAGEO), and RMCF0805FT105R (Stackpole Electronics) all meet the core electrical requirements: 105 Ohms ±1% resistance, 0.125W power rating, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. All are packaged in 0805 (2012 Metric) format with MSL 1 rating.

Q: What is the significance of the height differences between substitutes?

A: Seated height variations (0.020" to 0.028") reflect manufacturing tolerances and design differences but do not affect electrical performance. Height becomes relevant only in space-constrained PCB designs where clearance is limited. CRCW0805105RFKEA offers the lowest profile at 0.020", while ERJ-S06F1050V and ERJ-6ENF1050V reach 0.028".

Q: Which substitute is recommended for automotive applications?

A: ERJ-6ENF1050V, CRCW0805105RFKEA, and RMCF0805FT105R all carry AEC-Q200 automotive qualification. RC0805FR-07105RL does not include this rating and is not recommended for automotive use unless the application does not require AEC-Q200 compliance.

Q: Is anti-sulfur coating critical for substitution?

A: Anti-sulfur coating is a feature of ERJ-S06F1050V but is not present in ERJ-6ENF1050V or other listed substitutes. If anti-sulfur protection is a design requirement, ERJ-S06F1050V should be retained. For general industrial and automotive applications without specific sulfur exposure concerns, substitutes without this feature are functionally equivalent.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes, within the constraints of PCB layout. All parts use the same 0805 (2012 Metric) footprint and share identical lead spacing. Height variations are minor and do not affect standard PCB assembly processes. Verify that component height does not conflict with board clearance requirements in your specific design.