ERJ-S03J910V Equivalent & Substitute Parts

Part Overview

The ERJ-S03J910V is a 91 Ohm ±5% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Panasonic Electronic Components. This component features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and harsh environment applications. The part is currently active in production with 886 pieces in stock. Equivalent and substitute parts are identified when electrical specifications, mechanical dimensions, and compliance ratings align with the original component, enabling seamless integration in circuit designs.

Key Parameters

Parameter	Value
Resistance	91 Ohms
Tolerance	±5%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S03J910V are qualified based on the following criteria:

Electrical Parameters: Resistance value (91 Ohms), tolerance (±5%), power rating (0.1W), temperature coefficient (±200ppm/°C), and operating temperature range (-55°C ~ 155°C) must be identical.

Mechanical Parameters: Package type (0603 / 1608 Metric), number of terminations (2), and physical dimensions must be compatible with the original footprint.

Compliance & Certifications: RoHS3 compliance and MSL rating (1) are required. Automotive AEC-Q200 qualification is present in the main part and most substitutes, indicating suitability for automotive applications.

Composition: Thick film construction is maintained across all qualified substitutes.

Parts are grouped as direct equivalents (same manufacturer, different series) or cross-manufacturer alternatives (different manufacturers with identical or near-identical specifications).

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power	Package	Temp Coeff	Op. Temp Range	AEC-Q200	RoHS3	MSL	Inventory
ERJ-S03J910V	Panasonic	91Ω	±5%	0.1W	0603	±200ppm/°C	-55°C ~ 155°C	Yes	Yes	1	886
ERJ-U03J910V	Panasonic	91Ω	±5%	0.1W	0603	±200ppm/°C	-55°C ~ 155°C	Yes	Yes	1	5824
ERJ-3GEYJ910V	Panasonic	91Ω	±5%	0.1W	0603	±200ppm/°C	-55°C ~ 155°C	Yes	Yes	1	108169
RMCF0603JT91R0	Stackpole Electronics	91Ω	±5%	0.1W	0603	±200ppm/°C	-55°C ~ 155°C	Yes	Yes	1	74510
CRCW060391R0JNEA	Vishay Dale	91Ω	±5%	0.1W	0603	±200ppm/°C	-55°C ~ 155°C	Yes	Yes	1	11533
CR0603-JW-910ELF	Bourns Inc.	91Ω	±5%	0.1W	0603	±200ppm/°C	-55°C ~ 155°C	No	Yes	1	23832

Engineering Selection Recommendations

Direct Panasonic Equivalents: ERJ-U03J910V and ERJ-3GEYJ910V are Panasonic alternatives within the same product family. Both maintain identical electrical and mechanical specifications with AEC-Q200 qualification. ERJ-3GEYJ910V offers significantly higher inventory availability (108,169 units) compared to the original ERJ-S03J910V (886 units).

Cross-Manufacturer Automotive-Qualified Alternatives: RMCF0603JT91R0 (Stackpole Electronics) and CRCW060391R0JNEA (Vishay Dale) are fully qualified substitutes with AEC-Q200 certification. Both maintain all critical electrical parameters and 0603 package compatibility. RMCF0603JT91R0 provides 74,510 units in inventory; CRCW060391R0JNEA provides 11,533 units.

Non-Automotive Alternative: CR0603-JW-910ELF (Bourns Inc.) meets all electrical and mechanical requirements with RoHS3 and MSL-1 compliance. This part lacks AEC-Q200 certification and features moisture-resistant construction instead of anti-sulfur coating. Selection of this part is appropriate only for non-automotive applications.

Inventory Considerations: All substitute parts are available in production quantities. Selection should prioritize application requirements (automotive vs. general-purpose) and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U03J910V replace ERJ-S03J910V in automotive applications? A: Yes. ERJ-U03J910V is a direct Panasonic equivalent with identical electrical specifications (91Ω ±5%, 0.1W), 0603 package, and AEC-Q200 automotive qualification. Both parts are interchangeable at the circuit level.

Q: What is the difference between ERJ-S03J910V and ERJ-3GEYJ910V? A: Both are Panasonic 91Ω ±5% 0.1W 0603 resistors with AEC-Q200 qualification. The primary difference is the product series designation (ERJ-S03 vs. ERJ-3G). Electrical performance and package compatibility are identical. ERJ-3GEYJ910V has significantly higher inventory availability.

Q: Is CR0603-JW-910ELF suitable for automotive use? A: CR0603-JW-910ELF does not carry AEC-Q200 certification. This part is suitable for general-purpose and industrial applications but should not be used in automotive circuits requiring AEC-Q200 qualification. The moisture-resistant feature differs from the anti-sulfur coating of the original part.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts (ERJ-U03J910V, ERJ-3GEYJ910V, RMCF0603JT91R0, CRCW060391R0JNEA, and CR0603-JW-910ELF) are ROHS3 compliant with MSL-1 rating.

Q: Can I use RMCF0603JT91R0 or CRCW060391R0JNEA in place of ERJ-S03J910V? A: Yes, for automotive applications. Both parts are cross-manufacturer equivalents with identical 91Ω ±5% 0.1W specifications, 0603 package, and AEC-Q200 certification. Physical dimensions are within compatible tolerances for standard PCB footprints.

Q: What determines if a part is a valid substitute? A: Valid substitutes must match the original part in resistance value, tolerance, power rating, package type, temperature coefficient, operating temperature range, and relevant compliance certifications (RoHS3, AEC-Q200 for automotive). Mechanical dimensions must be compatible with the PCB footprint.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message