ERJ-S03J820V Equivalent & Substitute Parts

Part Overview

The ERJ-S03J820V is a 0603 (1608 Metric) thick film chip resistor manufactured by Panasonic Electronic Components, rated at 82 Ohms ±5% with 0.1W power handling. This component is designed for automotive applications, meeting AEC-Q200 qualification standards with anti-sulfur protection. The part is currently in active production status. Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

ERJ-S03J820V

Panasonic Electronic ComponentsIn Stock: 904ERJ-S03J820V Datasheet

Current PartRFQ

ERJ-U03J820V

Panasonic Electronic ComponentsIn Stock: 6196ERJ-U03J820V Datasheet

DirectRFQ

ERJ-3GEYJ820V

Panasonic Electronic ComponentsIn Stock: 136042ERJ-3GEYJ820V Datasheet

SimilarRFQ

CR0603-JW-820ELF

Bourns Inc.In Stock: 54693CR0603-JW-820ELF Datasheet

SimilarRFQ

CRCW060382R0JNEA

Vishay DaleIn Stock: 7413CRCW060382R0JNEA Datasheet

SimilarRFQ

RMCF0603JT82R0

Stackpole Electronics IncIn Stock: 89620RMCF0603JT82R0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S03J820V is determined by strict equivalence across the following critical parameters:

• Resistance value: 82 Ohms
• Tolerance: ±5%
• Power rating: 0.1W (1/10W)
• Package: 0603 (1608 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Number of terminations: 2
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Substitute parts are grouped into two categories: direct equivalents from the same manufacturer (Panasonic) and cross-manufacturer alternatives that meet identical electrical and mechanical specifications. All listed substitutes maintain full compatibility with the original part's electrical performance and physical footprint requirements.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and mechanical compatibility with the ERJ-S03J820V. Selection among alternatives should be based on the following factors:

Panasonic ERJ-U03J820V: Direct Panasonic equivalent with identical specifications and anti-sulfur protection. Suitable for direct replacement with no design modifications required.

Panasonic ERJ-3GEYJ820V: Panasonic alternative from the ERJ-3G series. Meets all electrical and mechanical requirements. Lacks anti-sulfur designation but maintains AEC-Q200 automotive qualification.

Bourns CR0603-JW-820ELF: Cross-manufacturer substitute with moisture-resistant thick film composition. Meets all core electrical specifications and RoHS compliance. Suitable for applications where Bourns component qualification is required.

Vishay Dale CRCW060382R0JNEA: Cross-manufacturer alternative with AEC-Q200 automotive qualification. Packaging format is Cut Tape (CT) & Digi-Reel® rather than Tape & Reel. Physical dimensions show minor variation (0.033" W vs. 0.031" W; 0.020" height vs. 0.022" height) within acceptable tolerance for 0603 package specifications.

Stackpole RMCF0603JT82R0: Cross-manufacturer substitute with AEC-Q200 automotive qualification. Physical dimensions show minor variation (0.061" L vs. 0.063" L) within acceptable tolerance for 0603 package specifications.

All parts are ROHS3 compliant, REACH unaffected, and carry MSL rating of 1 (Unlimited), ensuring compatibility with standard manufacturing and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U03J820V be used as a direct replacement for ERJ-S03J820V?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (82 Ohms ±5%, 0.1W, ±200ppm/°C), and are packaged in 0603 (1608 Metric) format. Both carry AEC-Q200 automotive qualification and anti-sulfur protection.

Q: What is the difference between ERJ-3GEYJ820V and ERJ-S03J820V?

A: Both are Panasonic 0603 thick film resistors with identical electrical ratings. The primary difference is that ERJ-3GEYJ820V does not include anti-sulfur protection, though it maintains AEC-Q200 automotive qualification. All other electrical and mechanical parameters are equivalent.

Q: Are cross-manufacturer parts (Bourns, Vishay, Stackpole) fully compatible?

A: Yes. CR0603-JW-820ELF, CRCW060382R0JNEA, and RMCF0603JT82R0 all meet the core electrical specifications: 82 Ohms ±5%, 0.1W power rating, ±200ppm/°C temperature coefficient, and -55°C to 155°C operating range. All are packaged in 0603 (1608 Metric) format with 2 terminations and ROHS3 compliance.

Q: Does packaging format affect substitution?

A: CRCW060382R0JNEA is supplied in Cut Tape (CT) & Digi-Reel® format, while the original ERJ-S03J820V and most alternatives use Tape & Reel (TR). This affects handling and automated assembly processes but does not impact electrical or mechanical compatibility of the component itself.

Q: Are there dimensional differences between substitute parts?

A: Minor dimensional variations exist within 0603 package tolerance specifications. CRCW060382R0JNEA measures 0.063" L x 0.033" W (1.60mm x 0.85mm) with 0.020" max height, while RMCF0603JT82R0 measures 0.061" L x 0.031" W (1.55mm x 0.80mm) with 0.022" max height. These variations remain within standard 0603 package tolerances and do not affect PCB footprint compatibility.

Q: Which substitute part has the highest inventory availability?

A: ERJ-3GEYJ820V (Panasonic) has the highest inventory at 136,021 pieces. RMCF0603JT82R0 (Stackpole) has 89,524 pieces, and CR0603-JW-820ELF (Bourns) has 54,603 pieces available.

Q: Do all substitute parts meet automotive qualification standards?

A: ERJ-U03J820V, ERJ-3GEYJ820V, CRCW060382R0JNEA, and RMCF0603JT82R0 all carry AEC-Q200 automotive qualification. CR0603-JW-820ELF does not list AEC-Q200 rating but is qualified as moisture-resistant thick film.