ERJ-S03J363V Equivalent & Substitute Parts

Part Overview

The ERJ-S03J363V is a 36 kOhm ±5% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur construction with unlimited moisture sensitivity level (MSL 1). The part is active and in production. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, package type, and automotive qualification requirements.

Key Parameters

Parameter	Value
Resistance	36 kOhms
Tolerance	±5%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Packaging	Tape & Reel (TR)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S03J363V are qualified based on the following criteria:

Electrical Parameters (Must Match):

Resistance value: 36 kOhms
Tolerance: ±5%
Power rating: 0.1W (1/10W)
Temperature coefficient: ±200ppm/°C
Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

Package type: 0603 (1608 Metric)
Number of terminations: 2
Composition: Thick Film

Compliance & Ratings (Must Match or Exceed):

RoHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)
Automotive AEC-Q200 qualification (where specified)

Substitutes are grouped into two categories: direct equivalents from Panasonic (same series evolution) and cross-manufacturer alternatives meeting identical electrical and mechanical specifications.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp (°C)	AEC-Q200	RoHS3	MSL	Size L×W (mm)	Height Max (mm)
ERJ-S03J363V	Panasonic	36 kΩ	±5%	0.1	0603	±200ppm/°C	-55~155	Yes	Yes	1	1.60×0.80	0.55
ERJ-U03J363V	Panasonic	36 kΩ	±5%	0.1	0603	±200ppm/°C	-55~155	Yes	Yes	1	1.60×0.80	0.55
ERJ-3GEYJ363V	Panasonic	36 kΩ	±5%	0.1	0603	±200ppm/°C	-55~155	Yes	Yes	1	1.60×0.80	0.55
CR0603-JW-363ELF	Bourns Inc.	36 kΩ	±5%	0.1	0603	±200ppm/°C	-55~155	No	Yes	1	1.60×0.80	0.55
CRCW060336K0JNEA	Vishay Dale	36 kΩ	±5%	0.1	0603	±200ppm/°C	-55~155	Yes	Yes	1	1.60×0.85	0.50
RMCF0603JG36K0	Stackpole Electronics	36 kΩ	±5%	0.1	0603	±200ppm/°C	-55~155	Yes	Yes	1	1.55×0.80	0.55
RMCF0603JT36K0	Stackpole Electronics	36 kΩ	±5%	0.1	0603	±200ppm/°C	-55~155	Yes	Yes	1	1.55×0.80	0.55

Engineering Selection Recommendations

Direct Panasonic Equivalents (Preferred for Panasonic-specified designs):

ERJ-U03J363V: Series evolution from ERJ-S03. Identical electrical and mechanical specifications. Higher inventory availability (10,675 pcs). Recommended as primary substitute within Panasonic product line.
ERJ-3GEYJ363V: Panasonic ERJ-3G series. Meets all electrical and mechanical requirements. Highest inventory availability (92,746 pcs). Suitable for designs without anti-sulfur requirement specification.

Cross-Manufacturer Automotive-Qualified Alternatives:

CRCW060336K0JNEA (Vishay Dale): AEC-Q200 rated. Dimensions within 0603 tolerance band (1.60×0.85mm length, 0.50mm height). Suitable for automotive applications requiring Vishay qualification.
RMCF0603JG36K0 and RMCF0603JT36K0 (Stackpole Electronics): Both AEC-Q200 rated. Dimensions within 0603 tolerance band (1.55×0.80mm). Stackpole RMCF series provides automotive-grade alternative.

Non-Automotive Alternative:

CR0603-JW-363ELF (Bourns Inc.): Meets all electrical and mechanical specifications. Moisture-resistant construction. Not AEC-Q200 rated. Suitable only for non-automotive applications or where automotive qualification is not required.

All listed substitutes maintain RoHS3 compliance and MSL 1 rating. Selection should prioritize AEC-Q200 qualification for automotive circuit applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U03J363V replace ERJ-S03J363V in automotive applications? A: Yes. Both parts are Panasonic products with identical electrical specifications (36 kΩ ±5%, 0.1W), identical package dimensions (0603), and both carry AEC-Q200 automotive qualification. ERJ-U03J363V represents a series evolution and is a direct substitute.

Q: What is the difference between ERJ-3GEYJ363V and ERJ-S03J363V? A: Both are Panasonic 36 kΩ ±5% 0.1W 0603 resistors with AEC-Q200 rating. The primary difference is series designation (ERJ-3G vs. ERJ-S03). ERJ-3GEYJ363V lacks the anti-sulfur feature specification but meets all electrical and mechanical requirements. Both are suitable for automotive use.

Q: Can I use CR0603-JW-363ELF (Bourns) in an automotive circuit? A: CR0603-JW-363ELF meets all electrical and mechanical specifications but is not AEC-Q200 rated. Use only in non-automotive applications or where automotive qualification is not a design requirement. For automotive circuits, select from AEC-Q200 qualified alternatives.

Q: Are there dimensional differences between these 0603 resistors? A: Yes, minor variations exist within 0603 tolerance specifications. CRCW060336K0JNEA measures 1.60×0.85mm (vs. 1.60×0.80mm standard) with 0.50mm height. RMCF series measures 1.55×0.80mm. These variations remain within 0603 package tolerance and do not affect PCB footprint compatibility.

Q: Which substitute has the best inventory availability? A: ERJ-3GEYJ363V (Panasonic) has the highest inventory at 92,746 pcs. CRCW060336K0JNEA (Vishay Dale) has 20,895 pcs. Both provide reliable supply for high-volume applications.

Q: Do all substitutes have the same moisture sensitivity level? A: Yes. All listed parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message