ERJ-S03F7321V Equivalent & Substitute Parts

Part Overview

The ERJ-S03F7321V is a 7.32 kOhms ±1% thick film chip resistor manufactured by Panasonic Electronic Components in 0603 (1608 Metric) package format. This component is rated for 0.1W (1/10W) power dissipation and features anti-sulfur properties with automotive AEC-Q200 qualification. The part is currently active in production with 804 units in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit designs without performance degradation.

Key Parameters

Parameter	Value
Resistance	7.32 kOhms
Tolerance	±1%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S03F7321V are qualified based on the following criteria:

Identical resistance value: 7.32 kOhms
Matching tolerance: ±1%
Equivalent power rating: 0.1W (1/10W)
Same package format: 0603 (1608 Metric)
Identical composition: Thick Film
Matching temperature coefficient: ±100ppm/°C
Overlapping operating temperature range: -55°C ~ 155°C
ROHS3 compliance and MSL 1 rating

All listed substitute parts meet these electrical and mechanical requirements, ensuring functional equivalence in circuit applications. Packaging format (Tape & Reel vs. Cut Tape) and specific feature sets (anti-sulfur, moisture resistant, automotive ratings) are noted but do not prevent substitution when electrical parameters align.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Operating Temp	AEC-Q200	RoHS3	Inventory (Pcs)
ERJ-S03F7321V	Panasonic	7.32 kΩ	±1%	0.1	0603	±100ppm/°C	-55~155°C	Yes	Yes	804
ERJ-3EKF7321V	Panasonic	7.32 kΩ	±1%	0.1	0603	±100ppm/°C	-55~155°C	Yes	Yes	116451
AC0603FR-077K32L	YAGEO	7.32 kΩ	±1%	0.1	0603	±100ppm/°C	-55~155°C	Yes	Yes	10579
CR0603-FX-7321ELF	Bourns Inc.	7.32 kΩ	±1%	0.1	0603	±100ppm/°C	-55~155°C	No	Yes	18266
CRCW06037K32FKEA	Vishay Dale	7.32 kΩ	±1%	0.1	0603	±100ppm/°C	-55~155°C	Yes	Yes	26393
RC0603FR-077K32L	YAGEO	7.32 kΩ	±1%	0.1	0603	±100ppm/°C	-55~155°C	No	Yes	170234
RMCF0603FG7K32	Stackpole Electronics Inc	7.32 kΩ	±1%	0.1	0603	±100ppm/°C	-55~155°C	Yes	Yes	11386
RMCF0603FT7K32	Stackpole Electronics Inc	7.32 kΩ	±1%	0.1	0603	±100ppm/°C	-55~155°C	Yes	Yes	88166

Engineering Selection Recommendations

All substitute parts listed maintain active product status and ROHS3 compliance. Selection between alternatives depends on specific application requirements:

For automotive applications requiring AEC-Q200 certification, the following parts are qualified: ERJ-3EKF7321V (Panasonic), AC0603FR-077K32L (YAGEO), CRCW06037K32FKEA (Vishay Dale), RMCF0603FG7K32 (Stackpole), and RMCF0603FT7K32 (Stackpole).

For non-automotive applications where AEC-Q200 is not required, CR0603-FX-7321ELF (Bourns) and RC0603FR-077K32L (YAGEO) provide equivalent electrical performance with moisture-resistant characteristics.

Packaging format selection (Tape & Reel for automated assembly vs. Cut Tape for manual or mixed-mode assembly) should align with production methodology. Inventory availability varies across manufacturers, with RC0603FR-077K32L offering the highest stock level at 170,234 units.

Frequently Asked Questions (FAQ)

Q: Can ERJ-3EKF7321V directly replace ERJ-S03F7321V?

A: Yes. Both parts are manufactured by Panasonic with identical electrical specifications (7.32 kΩ ±1%, 0.1W, 0603 package), matching temperature coefficients (±100ppm/°C), and equivalent operating ranges (-55°C ~ 155°C). Both carry AEC-Q200 automotive qualification and ROHS3 compliance. The primary difference is series designation (ERJ-3EK vs. ERJ-S03) and significantly higher inventory availability for ERJ-3EKF7321V.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is optimized for automated pick-and-place assembly equipment, providing components on continuous carrier tape. Cut Tape (CT) packaging supplies individual components or small quantities on tape segments, suitable for manual assembly or lower-volume production. Electrical and mechanical specifications remain identical; packaging choice depends on assembly process requirements.

Q: Are parts without AEC-Q200 certification suitable for automotive applications?

A: Parts lacking AEC-Q200 certification (CR0603-FX-7321ELF and RC0603FR-077K32L) do not meet automotive qualification standards. Use these parts only in non-automotive applications. For automotive circuits, select from AEC-Q200 qualified alternatives.

Q: Do all substitute parts have identical physical dimensions?

A: Substitute parts conform to 0603 (1608 Metric) package specifications. Minor dimensional variations exist within tolerance: most parts measure 0.063" L × 0.031" W (1.60mm × 0.80mm), while CRCW06037K32FKEA and RMCF series measure 0.061" L × 0.031" W (1.55mm × 0.80mm). These variations remain within standard 0603 package tolerances and do not affect PCB footprint compatibility.

Q: What does MSL 1 (Unlimited) moisture sensitivity mean?

A: MSL 1 indicates the component requires no special moisture protection during storage or handling. The component can be stored indefinitely under standard conditions without desiccant packaging or humidity control, simplifying inventory management and reducing handling costs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message