Equivalent & Substitute Parts for ERJ-S03F6200V

Part Overview

The ERJ-S03F6200V is a 620 Ohms ±1% 0.1W chip resistor in 0603 (1608 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 924 units in stock.

Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications. Alternative sources provide equivalent performance while maintaining compatibility with existing PCB designs and assembly processes.

Key Parameters

Parameter	Value
Resistance	620 Ohms
Tolerance	±1%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Matching Parameters:

Resistance value: 620 Ohms
Tolerance: ±1%
Power rating: 0.1W (1/10W)
Package: 0603 (1608 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
RoHS compliance: ROHS3 Compliant
Moisture sensitivity level: 1 (Unlimited)

Acceptable Variations:

Manufacturer source (Panasonic, YAGEO, Bourns, Vishay Dale, Stackpole)
Packaging format (Tape & Reel or Cut Tape & Digi-Reel)
Minor dimensional tolerances within 0603 specification
Additional features (anti-sulfur, moisture resistant, automotive AEC-Q200 certification)

All listed substitute parts meet these criteria and are functionally interchangeable with the ERJ-S03F6200V in circuit applications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	AEC-Q200	RoHS3	Inventory (Pcs)
ERJ-S03F6200V	Panasonic	620 Ω	±1%	0.1	0603	±100ppm/°C	-55~155°C	Yes	Yes	924
ERJ-U03F6200V	Panasonic	620 Ω	±1%	0.1	0603	±100ppm/°C	-55~155°C	Yes	Yes	3091
ERJ-3EKF6200V	Panasonic	620 Ω	±1%	0.1	0603	±100ppm/°C	-55~155°C	Yes	Yes	3200
AC0603FR-07620RL	YAGEO	620 Ω	±1%	0.1	0603	±100ppm/°C	-55~155°C	Yes	Yes	3713
CR0603-FX-6200ELF	Bourns Inc.	620 Ω	±1%	0.1	0603	±100ppm/°C	-55~155°C	No	Yes	13550
CRCW0603620RFKEA	Vishay Dale	620 Ω	±1%	0.1	0603	±100ppm/°C	-55~155°C	Yes	Yes	55850
RC0603FR-07620RL	YAGEO	620 Ω	±1%	0.1	0603	±100ppm/°C	-55~155°C	No	Yes	219896
RMCF0603FT620R	Stackpole Electronics Inc	620 Ω	±1%	0.1	0603	±100ppm/°C	-55~155°C	Yes	Yes	60692

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical compatibility with the ERJ-S03F6200V. Selection among alternatives should consider the following factors based on provided specifications:

Automotive AEC-Q200 Compliance: Parts ERJ-U03F6200V, ERJ-3EKF6200V, AC0603FR-07620RL, CRCW0603620RFKEA, and RMCF0603FT620R carry automotive AEC-Q200 qualification. These are preferred for automotive and high-reliability applications requiring formal qualification documentation.

General Industrial Applications: CR0603-FX-6200ELF and RC0603FR-07620RL are suitable for non-automotive applications where AEC-Q200 certification is not required. Both maintain ROHS3 compliance and equivalent electrical performance.

Inventory Availability: CRCW0603620RFKEA (55,850 units) and RC0603FR-07620RL (219,896 units) offer the highest stock levels, supporting high-volume production requirements.

Packaging Format: Tape & Reel packaging is standard for automated assembly. Cut Tape & Digi-Reel format (AC0603FR-07620RL, RC0603FR-07620RL) accommodates lower-volume or mixed-component orders.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U03F6200V replace ERJ-S03F6200V directly?

A: Yes. Both are Panasonic 620 Ohm ±1% 0.1W 0603 thick film resistors with identical electrical specifications, temperature coefficient, operating range, and AEC-Q200 qualification. The primary difference is the series designation (ERJ-U03 vs. ERJ-S03). ERJ-U03F6200V has higher inventory availability (3,091 units vs. 924 units).

Q: What is the difference between anti-sulfur and moisture-resistant features?

A: Anti-sulfur coating (ERJ-S03F6200V, ERJ-U03F6200V) protects against sulfur-containing atmospheric corrosion, typical in automotive environments. Moisture-resistant features (AC0603FR-07620RL, CR0603-FX-6200ELF, RC0603FR-07620RL) provide protection against humidity and condensation. Both are valid protective mechanisms; selection depends on environmental exposure conditions.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 Compliant status and are suitable for applications requiring RoHS compliance.

Q: Can I use CR0603-FX-6200ELF or RC0603FR-07620RL in automotive applications?

A: These parts lack AEC-Q200 automotive qualification. For automotive applications requiring formal qualification documentation, use ERJ-U03F6200V, ERJ-3EKF6200V, AC0603FR-07620RL, CRCW0603620RFKEA, or RMCF0603FT620R instead.

Q: What is the significance of Moisture Sensitivity Level 1?

A: MSL 1 indicates unlimited shelf life without moisture baking requirements. All listed parts carry MSL 1 rating, eliminating moisture-related handling constraints during storage and assembly.

Q: Are dimensional variations between substitute parts significant?

A: All parts conform to 0603 (1608 Metric) package specification. Minor dimensional variations (e.g., CRCW0603620RFKEA at 1.55mm x 0.85mm vs. standard 1.60mm x 0.80mm) remain within 0603 tolerance and do not affect PCB footprint compatibility or assembly processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message