ERJ-S03F5R60V Equivalent & Substitute Parts

Part Overview

The ERJ-S03F5R60V is a 5.6 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 0603 (1608 Metric) package format. This component is rated for 0.1W (1/10W) power dissipation and features anti-sulfur construction with automotive AEC-Q200 qualification. The part is currently in active production status with 684 pieces available in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications are maintained across alternative part numbers within the same manufacturer's product line.

Substiute Parts

ERJ-S03F5R60V

Panasonic Electronic ComponentsIn Stock: 743ERJ-S03F5R60V Datasheet

Current PartRFQ

ERJ-U03F5R60V

Panasonic Electronic ComponentsIn Stock: 4663ERJ-U03F5R60V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ERJ-S03F5R60V is determined by strict equivalence across the following critical parameters:

Electrical Specifications: Resistance value (5.6 Ohms), tolerance (±1%), and power rating (0.1W) must be identical. Temperature coefficient (-100 / +600 ppm/°C) and operating temperature range (-55°C ~ 155°C) must match exactly.

Mechanical Compatibility: Package format (0603 / 1608 Metric), physical dimensions (0.063" L x 0.031" W / 1.60mm x 0.80mm), and seated height (0.022" / 0.55mm maximum) must be identical to ensure PCB layout and assembly compatibility.

Compliance & Ratings: AEC-Q200 automotive qualification, anti-sulfur construction, ROHS3 compliance, and MSL 1 rating must be maintained. REACH and ECCN classifications must remain consistent.

Packaging Format: Tape & Reel (TR) packaging must be preserved for automated assembly processes.

The ERJ-U03F5R60V qualifies as a direct substitute based on complete alignment with all specified parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S03F5R60V and ERJ-U03F5R60V are active production components manufactured by Panasonic Electronic Components with identical electrical, mechanical, and compliance specifications. Selection between these parts is based on inventory availability and supply chain considerations rather than technical performance differences.

The ERJ-S03F5R60V (main part) has 684 pieces in stock. The ERJ-U03F5R60V (substitute) has 4,575 pieces in stock, providing significantly greater availability. Both parts maintain ROHS3 compliance, AEC-Q200 automotive qualification, and MSL 1 moisture sensitivity rating, making them suitable for automotive and industrial applications requiring anti-sulfur thick film resistors in 0603 package format.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U03F5R60V be used as a direct replacement for ERJ-S03F5R60V in automotive applications?

A: Yes. Both parts are AEC-Q200 qualified with identical electrical specifications (5.6 Ohms ±1%, 0.1W), mechanical dimensions (0603 package), and operating temperature range (-55°C ~ 155°C). The anti-sulfur construction is present in both variants.

Q: Are there any differences in the 0603 package dimensions between these two parts?

A: No. Both parts have identical physical dimensions: 0.063" L x 0.031" W (1.60mm x 0.80mm) with maximum seated height of 0.022" (0.55mm). PCB layout and assembly tooling are fully compatible.

Q: Do both parts meet the same compliance and certification standards?

A: Yes. Both ERJ-S03F5R60V and ERJ-U03F5R60V are ROHS3 compliant, REACH unaffected, classified as EAR99, and carry MSL 1 (unlimited) moisture sensitivity rating. AEC-Q200 automotive qualification applies to both.

Q: What is the difference between the ERJ-S03 and ERJ-U03 series designations?

A: The series designation difference (S03 versus U03) reflects internal Panasonic product line categorization. From an engineering standpoint, the electrical and mechanical specifications are identical, and both series are active production lines.

Q: Is Tape & Reel packaging available for both parts?

A: Yes. Both ERJ-S03F5R60V and ERJ-U03F5R60V are supplied in Tape & Reel (TR) format, suitable for automated pick-and-place assembly processes.

Q: Can these parts be used interchangeably in high-temperature applications?

A: Yes. Both parts have identical operating temperature range of -55°C ~ 155°C and temperature coefficient of -100 / +600 ppm/°C, making them suitable for equivalent thermal performance in specified operating conditions.