ERJ-S03F53R6V Equivalent & Substitute Parts

Part Overview

The ERJ-S03F53R6V is a 53.6 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in 0603 (1608 Metric) package format. This component is rated for 0.1W (1/10W) power dissipation and features anti-sulfur properties with automotive AEC-Q200 qualification. The part is currently in active production status with 1013 units available in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative manufacturers.

Key Parameters

Parameter	Value
Resistance	53.6 Ohms
Tolerance	±1%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S03F53R6V are qualified based on the following criteria:

Electrical Parameters: Resistance value (53.6 Ohms), tolerance (±1%), power rating (0.1W), and temperature coefficient (±100ppm/°C) must be identical.

Mechanical Parameters: Package format (0603 / 1608 Metric), physical dimensions, and termination count (2) must match or be compatible with PCB design specifications.

Compliance & Certifications: RoHS3 compliance and MSL rating (1) are maintained across all substitutes. Automotive AEC-Q200 qualification is present in four of five substitute parts; one substitute (CR0603-FX-53R6ELF) features moisture resistance instead.

Operating Conditions: Temperature range (-55°C ~ 155°C) and environmental performance characteristics must be equivalent.

All five substitute parts meet these criteria and are suitable for direct replacement in applications where the ERJ-S03F53R6V is specified.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power	Package	Temp Coeff	Operating Temp	Features	RoHS	MSL	Inventory
ERJ-S03F53R6V	Panasonic	53.6 Ω	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	Anti-Sulfur, AEC-Q200	ROHS3	1	1013 Pcs
ERJ-3EKF53R6V	Panasonic	53.6 Ω	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	AEC-Q200	ROHS3	1	59780 Pcs
CR0603-FX-53R6ELF	Bourns Inc.	53.6 Ω	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	ROHS3	1	18865 Pcs
CRCW060353R6FKEA	Vishay Dale	53.6 Ω	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	AEC-Q200	ROHS3	1	29151 Pcs
RC0603FR-0753R6L	YAGEO	53.6 Ω	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	ROHS3	1	164892 Pcs
RMCF0603FT53R6	Stackpole Electronics Inc	53.6 Ω	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	AEC-Q200	ROHS3	1	10067 Pcs

Engineering Selection Recommendations

All substitute parts maintain active production status and full RoHS3 compliance. Selection between substitutes depends on application-specific requirements:

For Automotive Applications: ERJ-3EKF53R6V (Panasonic), CRCW060353R6FKEA (Vishay Dale), and RMCF0603FT53R6 (Stackpole Electronics Inc) carry AEC-Q200 automotive qualification matching the original part specification.

For High-Moisture Environments: CR0603-FX-53R6ELF (Bourns Inc.) and RC0603FR-0753R6L (YAGEO) feature moisture-resistant construction, suitable for applications requiring enhanced environmental protection.

For Supply Chain Continuity: RC0603FR-0753R6L offers the highest inventory availability (164892 units), followed by ERJ-3EKF53R6V (59780 units) and CRCW060353R6FKEA (29151 units).

All parts are electrically and mechanically interchangeable within the specified parameters.

Frequently Asked Questions (FAQ)

Q: Can ERJ-3EKF53R6V replace ERJ-S03F53R6V directly? A: Yes. Both are Panasonic 53.6 Ohm ±1% 0603 resistors with identical electrical specifications, temperature coefficient, and operating range. The primary difference is packaging format (Cut Tape & Digi-Reel® versus Tape & Reel), which does not affect component performance.

Q: What is the difference between AEC-Q200 and moisture-resistant variants? A: AEC-Q200 qualified parts (ERJ-3EKF53R6V, CRCW060353R6FKEA, RMCF0603FT53R6) meet automotive reliability standards. Moisture-resistant variants (CR0603-FX-53R6ELF, RC0603FR-0753R6L) provide enhanced protection in humid environments. Both meet MSL 1 requirements.

Q: Are physical dimensions identical across all substitutes? A: Dimensions are equivalent within tolerance. CRCW060353R6FKEA and RMCF0603FT53R6 have slightly reduced length (1.55mm vs 1.60mm) and height specifications, but remain compatible with standard 0603 PCB footprints.

Q: Which substitute offers the best availability? A: RC0603FR-0753R6L (YAGEO) provides the highest stock level at 164892 units.

Q: Can these parts be used interchangeably in existing designs? A: Yes, all substitute parts are electrically and mechanically compatible with designs specified for ERJ-S03F53R6V, provided the application does not require specific anti-sulfur properties unique to the original part.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message