ERJ-S03F3740V Equivalent & Substitute Parts

Part Overview

The ERJ-S03F3740V is a 374 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 0603 (1608 Metric) package format. This component is rated for 0.1W (1/10W) power dissipation and features anti-sulfur properties with automotive AEC-Q200 qualification. The part is currently in active production status with 879 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility across multiple qualified suppliers is needed for production continuity.

Key Parameters

Parameter	Value
Resistance	374 Ohms
Tolerance	±1%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level (MSL)	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S03F3740V is determined by strict equivalence across the following critical parameters:

Resistance value: 374 Ohms (exact match required)
Tolerance: ±1% (exact match required)
Power rating: 0.1W / 1/10W (exact match required)
Package format: 0603 (1608 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature coefficient: ±100ppm/°C (exact match required)
Operating temperature range: -55°C ~ 155°C (exact match required)
Moisture sensitivity level: MSL 1 (exact match required)
RoHS compliance: ROHS3 Compliant (exact match required)

All five substitute parts listed below meet these criteria and are therefore direct functional equivalents suitable for one-to-one replacement in circuit designs.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	MSL	RoHS	AEC-Q200	Packaging Type	Inventory
ERJ-S03F3740V	Panasonic	374 Ω	±1%	0.1	0603	±100ppm/°C	-55 ~ 155°C	1	ROHS3	Yes	Tape & Reel	879
AC0603FR-07374RL	YAGEO	374 Ω	±1%	0.1	0603	±100ppm/°C	-55 ~ 155°C	1	ROHS3	Yes	Tape & Reel	14451
CR0603-FX-3740ELF	Bourns Inc.	374 Ω	±1%	0.1	0603	±100ppm/°C	-55 ~ 155°C	1	ROHS3	No	Cut Tape & Digi-Reel	37104
CRCW0603374RFKEA	Vishay Dale	374 Ω	±1%	0.1	0603	±100ppm/°C	-55 ~ 155°C	1	ROHS3	Yes	Tape & Reel	28910
RC0603FR-07374RL	YAGEO	374 Ω	±1%	0.1	0603	±100ppm/°C	-55 ~ 155°C	1	ROHS3	No	Tape & Reel	454175
RMCF0603FT374R	Stackpole Electronics Inc	374 Ω	±1%	0.1	0603	±100ppm/°C	-55 ~ 155°C	1	ROHS3	Yes	Tape & Reel	6754

Engineering Selection Recommendations

All substitute parts listed are functionally equivalent to the ERJ-S03F3740V and meet identical electrical and mechanical specifications. Selection among these alternatives should be based on the following factors:

Automotive AEC-Q200 Compliance: The ERJ-S03F3740V, AC0603FR-07374RL, CRCW0603374RFKEA, and RMCF0603FT374R carry AEC-Q200 automotive qualification. The CR0603-FX-3740ELF (Bourns) and RC0603FR-07374RL (YAGEO) do not carry this certification. For automotive applications requiring AEC-Q200 compliance, use only the four qualified parts.

Supply Availability: RC0603FR-07374RL offers the highest inventory level at 454,175 units, followed by CR0603-FX-3740ELF at 37,104 units. These parts are suitable for non-automotive applications or where AEC-Q200 is not a design requirement.

Packaging Format: CR0603-FX-3740ELF is supplied in Cut Tape & Digi-Reel format. All other substitutes are supplied in standard Tape & Reel packaging. Verify compatibility with your assembly equipment before selection.

Manufacturer Diversity: Substitutes span five manufacturers (Panasonic, YAGEO, Bourns, Vishay Dale, Stackpole Electronics), providing supply chain flexibility and reducing single-source dependency risk.

Frequently Asked Questions (FAQ)

Q: Can I use CR0603-FX-3740ELF or RC0603FR-07374RL in an automotive application?

A: These parts do not carry AEC-Q200 certification. For automotive applications requiring AEC-Q200 compliance, use only ERJ-S03F3740V, AC0603FR-07374RL, CRCW0603374RFKEA, or RMCF0603FT374R.

Q: Are all substitute parts pin-compatible with the ERJ-S03F3740V?

A: Yes. All substitute parts are 0603 (1608 Metric) package format with two terminations and identical footprint dimensions, ensuring direct PCB compatibility.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Tape & Reel is continuous reel packaging suitable for high-speed automated assembly. Cut Tape & Digi-Reel is pre-cut tape on a reel, typically used for lower-volume production or manual assembly. Verify your assembly equipment compatibility before selecting CR0603-FX-3740ELF.

Q: Do all parts meet RoHS3 compliance?

A: Yes. All listed parts, including the main part and all substitutes, are ROHS3 compliant.

Q: Can I mix different manufacturers' parts in the same production run?

A: Yes. All substitute parts meet identical electrical and mechanical specifications. Mixing manufacturers is acceptable from a functional standpoint, though some quality management systems may require documentation of the substitution.

Q: What is MSL 1 and why does it matter?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life with no special moisture control requirements during storage or handling. All listed parts carry MSL 1 rating, eliminating moisture-related handling constraints.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message