ERJ-S03F30R1V Equivalent & Substitute Parts

Part Overview

The ERJ-S03F30R1V is a 30.1 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in 0603 (1608 Metric) package format with 0.1W power rating. This component is rated for automotive applications under AEC-Q200 standard with anti-sulfur properties and operates across -55°C to 155°C temperature range. The part is currently active in production with ROHS3 compliance. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and regulatory certifications align with the original component requirements.

Substiute Parts

ERJ-S03F30R1V
Panasonic Electronic ComponentsIn Stock: 872ERJ-S03F30R1V Datasheet
ERJ-S03F30R1V
Current Part
ERJ-3EKF30R1V
Panasonic Electronic ComponentsIn Stock: 106387ERJ-3EKF30R1V Datasheet
ERJ-3EKF30R1V
Similar
CR0603-FX-30R1ELF
Bourns Inc.In Stock: 17209CR0603-FX-30R1ELF Datasheet
CR0603-FX-30R1ELF
Similar
CRCW060330R1FKEA
Vishay DaleIn Stock: 24600CRCW060330R1FKEA Datasheet
CRCW060330R1FKEA
Similar
CRCW060330R1FKTA
Vishay DaleIn Stock: 1911CRCW060330R1FKTA Datasheet
CRCW060330R1FKTA
Similar
RC0603FR-0730R1L
YAGEOIn Stock: 338234RC0603FR-0730R1L Datasheet
RC0603FR-0730R1L
Similar
RMCF0603FT30R1
Stackpole Electronics IncIn Stock: 155113RMCF0603FT30R1 Datasheet
RMCF0603FT30R1
Similar

Key Parameters

Parameter Value
Resistance 30.1 Ohms
Tolerance ±1%
Power Rating 0.1W (1/10W)
Package / Case 0603 (1608 Metric)
Composition Thick Film
Temperature Coefficient ±100ppm/°C
Operating Temperature Range -55°C ~ 155°C
Number of Terminations 2
Moisture Sensitivity Level 1 (Unlimited)
RoHS Status ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S03F30R1V are qualified based on the following criteria:

Electrical Parameters: Resistance value of 30.1 Ohms, tolerance of ±1%, power rating of 0.1W, and temperature coefficient of ±100ppm/°C must match exactly.

Mechanical Parameters: Package format must be 0603 (1608 Metric) with two terminations. Physical dimensions and height specifications must be compatible with the original footprint.

Material & Composition: Thick film construction is required for all substitutes.

Operating Conditions: Temperature range of -55°C to 155°C and MSL rating of 1 (Unlimited) must be maintained.

Regulatory Compliance: Parts must maintain ROHS3 compliance status and REACH compliance alignment. Automotive AEC-Q200 rating is specified for the primary part and preferred for substitutes where available.

Packaging: Tape & Reel (TR) packaging format applies to all listed alternatives.

Parameter Comparison

Manufacturer Part Number Manufacturer Resistance Tolerance Power (W) Package Temp Coeff Temp Range AEC-Q200 RoHS Status Inventory (Pcs)
ERJ-S03F30R1V Panasonic 30.1 Ω ±1% 0.1 0603 ±100ppm/°C -55~155°C Yes ROHS3 809
ERJ-3EKF30R1V Panasonic 30.1 Ω ±1% 0.1 0603 ±100ppm/°C -55~155°C Yes ROHS3 106375
CR0603-FX-30R1ELF Bourns Inc. 30.1 Ω ±1% 0.1 0603 ±100ppm/°C -55~155°C No ROHS3 17183
CRCW060330R1FKEA Vishay Dale 30.1 Ω ±1% 0.1 0603 ±100ppm/°C -55~155°C Yes ROHS3 24573
CRCW060330R1FKTA Vishay Dale 30.1 Ω ±1% 0.1 0603 ±100ppm/°C -55~155°C Yes RoHS NC 1839
RC0603FR-0730R1L YAGEO 30.1 Ω ±1% 0.1 0603 ±100ppm/°C -55~155°C No ROHS3 338146
RMCF0603FT30R1 Stackpole Electronics 30.1 Ω ±1% 0.1 0603 ±100ppm/°C -55~155°C Yes ROHS3 155074

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

ERJ-3EKF30R1V (Panasonic) and RMCF0603FT30R1 (Stackpole Electronics) are direct equivalents with identical electrical specifications, AEC-Q200 automotive rating, ROHS3 compliance, and matching package dimensions. Both maintain the -55°C to 155°C operating range and ±100ppm/°C temperature coefficient. ERJ-3EKF30R1V offers significantly higher inventory availability (106,375 pcs) compared to the original part.

CRCW060330R1FKEA (Vishay Dale) provides equivalent electrical and thermal performance with AEC-Q200 rating and ROHS3 compliance. Physical dimensions show minor variation (0.061" L x 0.033" W versus 0.063" L x 0.031" W) and reduced height (0.020" versus 0.022"), which remains compatible with standard 0603 footprints.

Secondary Substitutes (Conditional Use):

CR0603-FX-30R1ELF (Bourns Inc.) and RC0603FR-0730R1L (YAGEO) meet all electrical and thermal specifications with ROHS3 compliance but lack AEC-Q200 automotive certification. These are suitable for non-automotive applications or where automotive qualification is not required. Both feature moisture-resistant properties and maintain full compatibility with 0603 package requirements.

Not Recommended:

CRCW060330R1FKTA (Vishay Dale) does not maintain ROHS3 compliance and is marked as RoHS non-compliant with REACH Affected status. This part should not be selected for new designs or applications requiring regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can ERJ-3EKF30R1V replace ERJ-S03F30R1V directly?

A: Yes. Both parts share identical electrical specifications (30.1 Ω ±1%, 0.1W), package format (0603), temperature range (-55°C to 155°C), and AEC-Q200 automotive rating. The primary difference is the series designation (ERJ-3EK versus ERJ-S03), which reflects manufacturing line variation within Panasonic's product portfolio. Footprint and performance are equivalent.

Q: What is the difference between AEC-Q200 rated and non-rated substitutes?

A: AEC-Q200 is an automotive industry qualification standard that certifies component reliability under automotive operating conditions. Parts with AEC-Q200 rating (ERJ-3EKF30R1V, CRCW060330R1FKEA, RMCF0603FT30R1) are qualified for automotive applications. Parts without this rating (CR0603-FX-30R1ELF, RC0603FR-0730R1L) are suitable for consumer and industrial applications but should not be used in automotive designs unless specifically approved by design requirements.

Q: Are there physical dimension differences between substitutes?

A: Minor variations exist within the 0603 package specification. The original ERJ-S03F30R1V measures 0.063" L x 0.031" W x 0.022" H. CRCW060330R1FKEA measures 0.061" L x 0.033" W x 0.020" H. These variations remain within 0603 package tolerance and are compatible with standard PCB footprints. RMCF0603FT30R1 and RC0603FR-0730R1L match the original dimensions exactly.

Q: Why is CRCW060330R1FKTA not recommended despite matching electrical specifications?

A: CRCW060330R1FKTA fails to meet current regulatory requirements. It is marked as RoHS non-compliant and REACH Affected, making it unsuitable for new product designs or applications requiring regulatory compliance. CRCW060330R1FKEA from the same manufacturer provides an equivalent alternative with full ROHS3 compliance.

Q: Which substitute offers the best inventory availability?

A: RC0603FR-0730R1L (YAGEO) provides the highest inventory level at 338,146 pcs. For automotive-qualified alternatives, ERJ-3EKF30R1V (Panasonic) offers 106,375 pcs and RMCF0603FT30R1 (Stackpole Electronics) offers 155,074 pcs.

Q: Can moisture-resistant variants be used interchangeably?

A: Yes. CR0603-FX-30R1ELF and RC0603FR-0730R1L feature moisture-resistant properties in addition to the standard thick film construction. The ERJ-S03F30R1V includes anti-sulfur properties. All variants maintain MSL rating of 1 (Unlimited) and are compatible for applications requiring moisture protection.

Request Quote (Ships tomorrow)