ERJ-S03F2322V Equivalent & Substitute Parts

Part Overview

The ERJ-S03F2322V is a 23.2 kOhms ±1% thick film chip resistor manufactured by Panasonic Electronic Components in 0603 (1608 Metric) package format. This component is rated for 0.1W (1/10W) power dissipation and features anti-sulfur properties with automotive AEC-Q200 qualification. The part is currently active in production with 852 units in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct interchangeability in circuit applications.

Key Parameters

Parameter	Value
Resistance	23.2 kOhms
Tolerance	±1%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
AEC-Q200 Rating	Yes

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S03F2322V are qualified based on the following criteria:

Electrical Parameters (Must Match Exactly):

Resistance value: 23.2 kOhms
Tolerance: ±1%
Power rating: 0.1W (1/10W)
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

Package type: 0603 (1608 Metric)
Number of terminations: 2
Composition: Thick Film

Compliance & Certification (Preferred for Automotive Applications):

RoHS3 compliance
Moisture Sensitivity Level 1
AEC-Q200 automotive qualification (where applicable)

All identified substitute parts meet these core electrical and mechanical requirements. Packaging format variations (Tape & Reel vs. Cut Tape) do not affect electrical interchangeability but may impact procurement and assembly processes.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Operating Temp	AEC-Q200	RoHS3	Packaging Format	Inventory (Pcs)
ERJ-S03F2322V	Panasonic	23.2 kΩ	±1%	0.1	0603	±100ppm/°C	-55°C ~ 155°C	Yes	Yes	Tape & Reel	852
ERJ-3EKF2322V	Panasonic	23.2 kΩ	±1%	0.1	0603	±100ppm/°C	-55°C ~ 155°C	Yes	Yes	Cut Tape & Digi-Reel	76,846
AC0603FR-0723K2L	YAGEO	23.2 kΩ	±1%	0.1	0603	±100ppm/°C	-55°C ~ 155°C	Yes	Yes	Tape & Reel	3,596
CR0603-FX-2322ELF	Bourns Inc.	23.2 kΩ	±1%	0.1	0603	±100ppm/°C	-55°C ~ 155°C	No	Yes	Tape & Reel	18,022
CRCW060323K2FKEA	Vishay Dale	23.2 kΩ	±1%	0.1	0603	±100ppm/°C	-55°C ~ 155°C	Yes	Yes	Cut Tape & Digi-Reel	10,669
CRCW060323K2FKTA	Vishay Dale	23.2 kΩ	±1%	0.1	0603	±100ppm/°C	-55°C ~ 155°C	Yes	No	Tape & Reel	5,887
RC0603FR-0723K2L	YAGEO	23.2 kΩ	±1%	0.1	0603	±100ppm/°C	-55°C ~ 155°C	No	Yes	Tape & Reel	167,692
RMCF0603FG23K2	Stackpole Electronics	23.2 kΩ	±1%	0.1	0603	±100ppm/°C	-55°C ~ 155°C	Yes	Yes	Cut Tape	56,575
RMCF0603FT23K2	Stackpole Electronics	23.2 kΩ	±1%	0.1	0603	±100ppm/°C	-55°C ~ 155°C	Yes	Yes	Cut Tape & Digi-Reel	419,394

Engineering Selection Recommendations

For Automotive Applications (AEC-Q200 Required): Select from parts with confirmed AEC-Q200 qualification: ERJ-3EKF2322V (Panasonic), AC0603FR-0723K2L (YAGEO), CRCW060323K2FKEA (Vishay Dale), RMCF0603FG23K2 (Stackpole), or RMCF0603FT23K2 (Stackpole). All maintain identical electrical specifications and operating temperature range.

For RoHS3 Compliance: All substitute parts except CRCW060323K2FKTA meet ROHS3 compliance requirements. CRCW060323K2FKTA is RoHS non-compliant and REACH affected; use only where legacy component specifications are mandated.

For High-Volume Procurement: RMCF0603FT23K2 offers the largest inventory (419,394 units) with AEC-Q200 qualification and ROHS3 compliance. RC0603FR-0723K2L (167,692 units) provides alternative high-volume availability without AEC-Q200 rating.

For Panasonic-Specific Supply Chain: ERJ-3EKF2322V is the direct Panasonic equivalent with significantly higher inventory (76,846 units) than the original ERJ-S03F2322V (852 units), differing only in packaging format (Cut Tape & Digi-Reel vs. Tape & Reel).

Frequently Asked Questions (FAQ)

Q: Can I substitute ERJ-S03F2322V with ERJ-3EKF2322V? A: Yes. Both are Panasonic 23.2 kOhms ±1% 0603 resistors with identical electrical and thermal specifications. The difference is packaging format: ERJ-S03F2322V uses Tape & Reel while ERJ-3EKF2322V uses Cut Tape & Digi-Reel. Electrical performance is identical.

Q: Are all substitute parts automotive-qualified? A: No. CR0603-FX-2322ELF (Bourns) and RC0603FR-0723K2L (YAGEO) do not carry AEC-Q200 certification. Use these only in non-automotive applications or where automotive qualification is not required.

Q: What is the difference between Tape & Reel and Cut Tape packaging? A: Both formats contain identical components. Tape & Reel is continuous reel packaging for automated assembly lines. Cut Tape & Digi-Reel is pre-cut tape on reels, suitable for both manual and automated pick-and-place operations. Electrical interchangeability is unaffected.

Q: Is CRCW060323K2FKTA suitable for new designs? A: CRCW060323K2FKTA is RoHS non-compliant and REACH affected. It is not recommended for new designs unless legacy component specifications explicitly require it. Use CRCW060323K2FKEA (RoHS3 compliant) instead.

Q: Do all parts have the same moisture sensitivity rating? A: Yes. All parts listed have Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture handling requirements during storage or assembly.

Q: Which substitute offers the best availability? A: RMCF0603FT23K2 (Stackpole) has the highest inventory at 419,394 units and meets all compliance requirements including AEC-Q200 and ROHS3.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message