ERJ-S03F16R2V Equivalent & Substitute Parts

Part Overview

The ERJ-S03F16R2V is a 16.2 Ohm ±1% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur construction. The part is currently active in production with 701 units in stock. Equivalent and substitute parts are identified when identical electrical specifications, mechanical dimensions, and compliance ratings are maintained across different manufacturers or product series.

Substiute Parts

ERJ-S03F16R2V

Panasonic Electronic ComponentsIn Stock: 759ERJ-S03F16R2V Datasheet

Current PartRFQ

ERJ-3EKF16R2V

Panasonic Electronic ComponentsIn Stock: 82795ERJ-3EKF16R2V Datasheet

SimilarRFQ

CRCW060316R2FKEA

Vishay DaleIn Stock: 29596CRCW060316R2FKEA Datasheet

SimilarRFQ

RC0603FR-0716R2L

YAGEOIn Stock: 76661RC0603FR-0716R2L Datasheet

SimilarRFQ

RMCF0603FT16R2

Stackpole Electronics IncIn Stock: 8938RMCF0603FT16R2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S03F16R2V is determined by strict equivalence across the following parameters:

• Resistance value: 16.2 Ohms
• Tolerance: ±1%
• Power rating: 0.1W (1/10W)
• Package: 0603 (1608 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3
• Moisture sensitivity level: 1 (Unlimited)

All identified substitute parts meet these core electrical and mechanical specifications. Variations in packaging format (Tape & Reel vs. Cut Tape & Digi-Reel) and minor dimensional tolerances do not affect functional equivalence. Automotive AEC-Q200 rating is present on the main part and most substitutes, with one substitute (RC0603FR-0716L) offering moisture-resistant construction as an alternative feature set.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain full electrical and mechanical equivalence to the ERJ-S03F16R2V. Selection among these alternatives is based on the following factors:

Automotive Applications: ERJ-3EKF16R2V, CRCW060316R2FKEA, and RMCF0603FT16R2 carry AEC-Q200 automotive qualification. These parts are suitable for automotive-grade circuit designs requiring compliance certification.

Anti-Sulfur Construction: The ERJ-S03F16R2V features anti-sulfur construction. The ERJ-3EKF16R2V from the same manufacturer (Panasonic) does not specify this feature. If anti-sulfur properties are a design requirement, the original part or equivalent parts with documented anti-sulfur treatment should be specified.

Moisture Resistance: The RC0603FR-0716R2L from YAGEO offers moisture-resistant construction as an alternative feature. This part does not carry AEC-Q200 rating but maintains all core electrical specifications and RoHS3 compliance.

Availability: ERJ-3EKF16R2V (82,758 units), RC0603FR-0716R2L (76,646 units), and CRCW060316R2FKEA (29,501 units) offer significantly higher inventory levels compared to the main part (701 units) and RMCF0603FT16R2 (8,843 units).

Packaging Format: Most substitutes are supplied in Tape & Reel format. CRCW060316R2FKEA is available in Cut Tape & Digi-Reel format, which may affect procurement and assembly processes.

Frequently Asked Questions (FAQ)

Q: Can ERJ-3EKF16R2V replace ERJ-S03F16R2V in automotive applications?

A: Yes. Both parts are manufactured by Panasonic, carry AEC-Q200 automotive qualification, and maintain identical electrical specifications (16.2 Ohms ±1%, 0.1W, ±100ppm/°C, -55°C ~ 155°C). The primary difference is that ERJ-S03F16R2V specifies anti-sulfur construction while ERJ-3EKF16R2V does not. If anti-sulfur properties are required by design specification, this difference must be evaluated.

Q: Are there dimensional differences between substitute parts?

A: Minor dimensional variations exist within the 0603 (1608 Metric) package specification. CRCW060316R2FKEA has a maximum seated height of 0.020" (0.50mm) compared to 0.022" (0.55mm) for other parts. RMCF0603FT16R2 has a length of 0.061" (1.55mm) compared to 0.063" (1.60mm) for other parts. These variations remain within standard 0603 package tolerances and do not affect PCB layout or assembly compatibility.

Q: Which substitute part is recommended for high-volume production?

A: ERJ-3EKF16R2V offers the highest inventory availability (82,758 units) and maintains automotive AEC-Q200 qualification. RC0603FR-0716R2L (76,646 units) is also suitable for high-volume applications. Both parts are supplied in standard Tape & Reel packaging compatible with automated assembly equipment.

Q: Does RC0603FR-0716R2L lack automotive qualification?

A: RC0603FR-0716R2L does not carry AEC-Q200 automotive rating. This part is suitable for non-automotive applications or designs where automotive qualification is not required. All other substitute parts maintain AEC-Q200 compliance.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All identified substitute parts are ROHS3 compliant and carry Moisture Sensitivity Level 1 (Unlimited), matching the compliance profile of the main part ERJ-S03F16R2V.