ERJ-S03F1302V Equivalent & Substitute Parts

Part Overview

The ERJ-S03F1302V is a 13 kOhms ±1% 0.1W chip resistor in 0603 (1608 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 790 units in stock.

Substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility across multiple qualified manufacturers is needed while maintaining identical electrical and mechanical specifications.

Key Parameters

Parameter	Value
Resistance	13 kOhms
Tolerance	±1%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

Resistance value: 13 kOhms
Tolerance: ±1%
Power rating: 0.1W (1/10W)
Package: 0603 (1608 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Number of terminations: 2
RoHS compliance: ROHS3 Compliant
Moisture sensitivity level: 1 (Unlimited)

All listed substitute parts meet these core electrical and mechanical requirements. Differences in packaging format (Tape & Reel vs. Cut Tape), manufacturer-specific features (anti-sulfur, moisture resistant), and AEC-Q200 certification status are noted but do not affect functional interchangeability for applications requiring the specified parameters.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power	Package	Temp Coeff	Op. Temp Range	AEC-Q200	Packaging Format	Inventory
ERJ-S03F1302V	Panasonic	13 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	Yes	Tape & Reel	790 Pcs
ERJ-U03F1302V	Panasonic	13 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	Yes	Tape & Reel	7811 Pcs
ERJ-3EKF1302V	Panasonic	13 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	Yes	Cut Tape & Digi-Reel	63963 Pcs
CRG0603F13K	TE Connectivity	13 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	No	Tape & Reel	1101 Pcs
AC0603FR-0713KL	YAGEO	13 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	Yes	Tape & Reel	139017 Pcs
CR0603-FX-1302ELF	Bourns Inc.	13 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	No	Tape & Reel	67785 Pcs
CRCW060313K0FKEA	Vishay Dale	13 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	Yes	Cut Tape & Digi-Reel	45300 Pcs
RC0603FR-0713KL	YAGEO	13 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	No	Cut Tape & Digi-Reel	548719 Pcs
RMCF0603FT13K0	Stackpole Electronics	13 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C ~ 155°C	Yes	Tape & Reel	297492 Pcs

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical equivalence to the ERJ-S03F1302V across resistance, tolerance, power rating, package dimensions, temperature coefficient, and operating temperature range.

For applications requiring automotive qualification, select from parts with AEC-Q200 certification: ERJ-U03F1302V, ERJ-3EKF1302V, AC0603FR-0713KL, CRCW060313K0FKEA, or RMCF0603FT13K0. These parts are suitable for automotive and high-reliability industrial applications.

For general-purpose applications where automotive qualification is not required, CRG0603F13K, CR0603-FX-1302ELF, and RC0603FR-0713KL provide equivalent performance at potentially lower cost.

Packaging format selection depends on assembly requirements: Tape & Reel format is standard for automated pick-and-place assembly, while Cut Tape & Digi-Reel format offers flexibility for lower-volume or mixed-component orders.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U03F1302V be used as a direct replacement for ERJ-S03F1302V?

A: Yes. Both parts are manufactured by Panasonic, share identical electrical specifications (13 kΩ ±1%, 0.1W, ±100ppm/°C), operate across the same temperature range (-55°C ~ 155°C), and are packaged in 0603 (1608 Metric). The primary difference is packaging format and higher inventory availability of ERJ-U03F1302V.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Tape & Reel packaging is supplied on continuous carrier tape wound on a reel, optimized for high-volume automated assembly. Cut Tape & Digi-Reel packaging provides the same components on cut tape segments or alternative reel formats, suitable for lower-volume orders or mixed-component procurement. Electrical and mechanical specifications remain identical.

Q: Are non-AEC-Q200 parts suitable for automotive applications?

A: Non-AEC-Q200 parts (CRG0603F13K, CR0603-FX-1302ELF, RC0603FR-0713KL) meet the same electrical and mechanical specifications but lack automotive qualification testing. Use of these parts in automotive applications requires design review and risk assessment by the system integrator.

Q: Do all substitute parts have the same physical dimensions?

A: All parts conform to the 0603 (1608 Metric) package standard. Minor dimensional variations exist: most parts measure 0.063" L × 0.031" W (1.60mm × 0.80mm), while CRCW060313K0FKEA and RMCF0603FT13K0 measure 0.061" L × 0.031" W (1.55mm × 0.80mm) and 0.061" L × 0.031" W (1.55mm × 0.80mm) respectively. These variations are within standard 0603 package tolerances and do not affect PCB footprint compatibility.

Q: Which substitute part has the highest inventory availability?

A: RC0603FR-0713KL (YAGEO) has the highest inventory at 548,719 units. RMCF0603FT13K0 (Stackpole Electronics) is the second highest at 297,492 units. Both are suitable for high-volume procurement.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message