ERJ-S02J914X Equivalent & Substitute Parts

Part Overview

The ERJ-S02J914X is a 910 kOhms ±5% 0.1W chip resistor in 0402 (1005 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 757 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

ERJ-S02J914X

Panasonic Electronic ComponentsIn Stock: 781ERJ-S02J914X Datasheet

Current PartRFQ

ERJ-U02J914X

Panasonic Electronic ComponentsIn Stock: 11222ERJ-U02J914X Datasheet

DirectRFQ

ERJ-2GEJ914X

Panasonic Electronic ComponentsIn Stock: 132729ERJ-2GEJ914X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S02J914X are qualified based on electrical and mechanical parameter equivalence. All substitute candidates must match the following critical parameters:

• Resistance value: 910 kOhms
• Tolerance: ±5%
• Power rating: 0.1W (1/10W)
• Package: 0402 (1005 Metric)
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

Two substitute parts meet these criteria and are classified as follows:

Direct Equivalent (ERJ-U02J914X): Panasonic Electronic Components part from the ERJ-U02 series. Identical electrical specifications and package. Features anti-sulfur coating matching the main part. Higher inventory availability (11,134 units).

Similar Substitute (ERJ-2GEJ914X): Panasonic Electronic Components part from the ERJ-2G series. Identical electrical specifications and package. Does not include anti-sulfur feature. Significantly higher inventory availability (132,662 units).

Parameter Comparison

Engineering Selection Recommendations

ERJ-U02J914X (Direct Equivalent): This part is the preferred substitute when supply of the ERJ-S02J914X is constrained. It maintains identical electrical performance, package compatibility, and anti-sulfur coating. Both parts carry active product status and full AEC-Q200 automotive qualification with ROHS3 compliance. The ERJ-U02 series provides superior inventory availability while preserving all functional and environmental specifications.

ERJ-2GEJ914X (Similar Substitute): This part is suitable for applications where anti-sulfur coating is not a design requirement. It delivers identical electrical specifications, package form factor, and automotive qualification. The ERJ-2G series offers the highest inventory availability among qualified substitutes. Selection of this part should be based on application environment and corrosive gas exposure risk assessment.

Both substitute parts are manufactured by Panasonic Electronic Components and maintain full compliance with automotive standards and environmental regulations applicable to the main part.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U02J914X be used as a direct replacement for ERJ-S02J914X?

A: Yes. The ERJ-U02J914X is a direct equivalent. Both parts share identical resistance (910 kOhms), tolerance (±5%), power rating (0.1W), package (0402), temperature coefficient (±200ppm/°C), operating range (-55°C ~ 155°C), and AEC-Q200 automotive qualification. Both include anti-sulfur coating. No design changes are required.

Q: What is the difference between ERJ-U02J914X and ERJ-2GEJ914X?

A: The primary difference is the anti-sulfur feature. The ERJ-U02J914X includes anti-sulfur coating; the ERJ-2GEJ914X does not. All other electrical and mechanical parameters are identical. The ERJ-2G series has significantly higher inventory availability.

Q: Are all three parts pin-compatible?

A: Yes. All three parts use the 0402 (1005 Metric) package with two terminations. They are mechanically and electrically interchangeable at the PCB level.

Q: Do all substitute parts meet automotive standards?

A: Yes. All three parts carry AEC-Q200 qualification and ROHS3 compliance. All are rated for -55°C ~ 155°C operating temperature range.

Q: Which part should be selected for high-humidity or corrosive environments?

A: For applications with sulfur-bearing gases or high-humidity exposure, the ERJ-S02J914X or ERJ-U02J914X are preferred due to anti-sulfur coating. The ERJ-2GEJ914X lacks this feature and should be evaluated based on specific environmental conditions.

Q: What is the moisture sensitivity rating for these parts?

A: All three parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.