ERJ-S02J6R2X Equivalent & Substitute Parts

Part Overview

The ERJ-S02J6R2X is a 6.2 Ohm ±5% 0.1W (1/10W) chip resistor manufactured by Panasonic Electronic Components in the 0402 (1005 Metric) package format. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and harsh environment applications. The part is currently in active production status with 805 pieces available in inventory. Substitute parts are identified to address inventory availability, packaging format preferences, or supply chain continuity requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

ERJ-S02J6R2X

Panasonic Electronic ComponentsIn Stock: 825ERJ-S02J6R2X Datasheet

Current PartRFQ

ERJ-U02J6R2X

Panasonic Electronic ComponentsIn Stock: 10334ERJ-U02J6R2X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ERJ-S02J6R2X is based on strict equivalence of the following critical parameters:

Electrical Parameters:

• Resistance value: 6.2 Ohms
• Tolerance: ±5%
• Power rating: 0.1W (1/10W)
• Temperature coefficient: -100 / +600 ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters:

• Package format: 0402 (1005 Metric)
• Physical dimensions: 0.039" L x 0.020" W (1.00mm x 0.50mm)
• Height - Seated (Max): 0.016" (0.40mm)
• Number of terminations: 2

Compliance & Certification Parameters:

• Composition: Thick Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

The identified substitute part maintains full electrical and mechanical compatibility while differing only in packaging format and inventory availability.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S02J6R2X and ERJ-U02J6R2X are active production parts manufactured by Panasonic Electronic Components with identical electrical specifications, mechanical dimensions, and compliance certifications. The parts are fully interchangeable from an electrical and mechanical standpoint.

The primary distinction between these parts is packaging format. The ERJ-U02J6R2X is supplied in Tape & Reel (TR) format with significantly higher inventory availability (10321 pieces versus 805 pieces). Selection between these parts should be based on:

1. Packaging Requirements: The ERJ-U02J6R2X in Tape & Reel format is suitable for automated assembly processes and high-volume production runs. The ERJ-S02J6R2X packaging format is not specified in the provided data.

2. Supply Chain Continuity: The ERJ-U02J6R2X offers greater inventory depth, supporting extended production schedules and reducing supply chain risk.

3. Compliance Verification: Both parts maintain identical AEC-Q200 automotive qualification, ROHS3 compliance, and REACH unaffected status, confirming suitability for regulated applications.

Both parts are suitable for automotive and harsh environment applications requiring anti-sulfur thick film resistors with automotive-grade reliability.

Frequently Asked Questions (FAQ)

Q: Are the ERJ-S02J6R2X and ERJ-U02J6R2X electrically identical?

A: Yes. Both parts have identical resistance (6.2 Ohms), tolerance (±5%), power rating (0.1W), temperature coefficient (-100 / +600 ppm/°C), and operating temperature range (-55°C ~ 155°C).

Q: Can the ERJ-U02J6R2X be used as a direct replacement for the ERJ-S02J6R2X in PCB assembly?

A: Yes. Both parts use the identical 0402 (1005 Metric) package with matching physical dimensions (0.039" L x 0.020" W, 1.00mm x 0.50mm) and height (0.016" / 0.40mm maximum). PCB footprints and assembly processes are compatible.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. The ERJ-U02J6R2X is supplied in Tape & Reel (TR) format, while the ERJ-S02J6R2X packaging format is not specified. The ERJ-U02J6R2X also has higher inventory availability.

Q: Do both parts meet automotive qualification standards?

A: Yes. Both the ERJ-S02J6R2X and ERJ-U02J6R2X carry AEC-Q200 automotive qualification and feature anti-sulfur coating, making them suitable for automotive applications.

Q: Are both parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory requirements.

Q: What is the moisture sensitivity level for these resistors?

A: Both parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.

Q: Can these parts be used interchangeably in high-reliability applications?

A: Yes. Both parts are active production components from Panasonic Electronic Components with identical electrical specifications, mechanical dimensions, and compliance certifications. They are fully interchangeable for high-reliability applications.