Equivalent & Substitute Parts for ERJ-S02J511X

Part Overview

The ERJ-S02J511X is a 510 Ohm ±5% 0.1W thick film chip resistor in 0402 (1005 Metric) package manufactured by Panasonic Electronic Components. This component features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and harsh environment applications. The part is currently active in production with 642 pieces in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative series designations.

Substiute Parts

ERJ-S02J511X

Panasonic Electronic ComponentsIn Stock: 720ERJ-S02J511X Datasheet

Current PartRFQ

ERJ-U02J511X

Panasonic Electronic ComponentsIn Stock: 81620ERJ-U02J511X Datasheet

DirectRFQ

ERJ-2GEJ511X

Panasonic Electronic ComponentsIn Stock: 170237ERJ-2GEJ511X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S02J511X are qualified based on strict equivalence of the following parameters: resistance value (510 Ohms), tolerance (±5%), power rating (0.1W), package type (0402), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive qualification (AEC-Q200). All substitute parts maintain identical electrical performance and mechanical compatibility. The substitutes identified differ only in their series designation (ERJ-U02 and ERJ-2G series) while preserving all functional and compliance characteristics.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ERJ-S02J511X, ERJ-U02J511X, and ERJ-2GEJ511X—are functionally equivalent and interchangeable in circuit applications. Selection between these parts should be based on availability and supply chain considerations. The ERJ-U02J511X offers the highest inventory availability at 81,525 pieces. The ERJ-2GEJ511X provides the second-highest availability at 170,197 pieces and lacks the anti-sulfur feature specification but maintains full AEC-Q200 automotive qualification. All parts maintain ROHS3 compliance, REACH unaffected status, and identical electrical and mechanical specifications. PCB layout and footprint compatibility is assured across all three designations due to identical 0402 package dimensions and termination configuration.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U02J511X be used as a direct replacement for ERJ-S02J511X? A: Yes. Both parts share identical resistance (510 Ohms), tolerance (±5%), power rating (0.1W), package (0402), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), and AEC-Q200 automotive qualification. The primary difference is the series designation and anti-sulfur feature presence in the ERJ-S02 series.

Q: What is the difference between ERJ-2GEJ511X and ERJ-S02J511X? A: Both parts are electrically and mechanically identical with matching resistance, tolerance, power rating, package, and automotive qualification. The ERJ-2GEJ511X does not specify anti-sulfur coating, while the ERJ-S02J511X includes this feature. Both maintain full AEC-Q200 compliance and identical thermal characteristics.

Q: Are all three parts suitable for automotive applications? A: Yes. All three parts carry AEC-Q200 automotive qualification and operate across the -55°C ~ 155°C temperature range required for automotive environments.

Q: Can these parts be used interchangeably on the same PCB? A: Yes. All three parts use the 0402 (1005 Metric) package with identical footprint dimensions (0.039" L x 0.020" W, 1.00mm x 0.50mm) and maximum seated height (0.016" / 0.40mm), ensuring mechanical and electrical compatibility in the same circuit board layout.

Q: What is the moisture sensitivity level for these parts? A: All three parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.