Equivalent & Substitute Parts for ERJ-S02J272X

Part Overview

The ERJ-S02J272X is a 2.7 kOhms ±5% thick film chip resistor manufactured by Panasonic Electronic Components in the 0402 (1005 Metric) package format. This component is rated for 0.1W (1/10W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is currently in active production status with 1088 pieces available in stock. Equivalent and substitute parts are identified when electrical specifications, mechanical dimensions, and compliance ratings remain identical or functionally equivalent across different series designations or packaging configurations.

Substiute Parts

ERJ-S02J272X

Panasonic Electronic ComponentsIn Stock: 1148ERJ-S02J272X Datasheet

Current PartRFQ

ERJ-U02J272X

Panasonic Electronic ComponentsIn Stock: 8544ERJ-U02J272X Datasheet

DirectRFQ

ERJ-2GEJ272X

Panasonic Electronic ComponentsIn Stock: 429001ERJ-2GEJ272X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S02J272X is determined by strict equivalence across the following parameters: resistance value (2.7 kOhms), tolerance (±5%), power rating (0.1W), package format (0402 / 1005 Metric), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive qualification (AEC-Q200). All identified substitutes maintain identical electrical performance and mechanical compatibility. Differences between substitute parts are limited to series designation and packaging configuration (tape & reel versus cut tape).

The ERJ-U02J272X qualifies as a direct substitute with identical electrical specifications and anti-sulfur feature set, differentiated only by series designation (ERJ-U02 versus ERJ-S02) and packaging method (tape & reel). The ERJ-2GEJ272X qualifies as a similar substitute with identical electrical specifications and package format, differentiated by series designation (ERJ-2G versus ERJ-S02) and packaging configuration (cut tape & Digi-Reel® versus tape & reel), with the distinction that anti-sulfur coating is not specified for this variant.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ERJ-S02J272X, ERJ-U02J272X, and ERJ-2GEJ272X—are active production components manufactured by Panasonic Electronic Components with identical electrical specifications and AEC-Q200 automotive qualification. Selection between these parts is based on packaging requirements and inventory availability rather than electrical performance.

The ERJ-S02J272X and ERJ-U02J272X are both supplied in tape & reel packaging and are functionally equivalent. The ERJ-U02J272X offers significantly higher inventory availability (8443 pieces versus 1088 pieces) while maintaining identical specifications and anti-sulfur coating.

The ERJ-2GEJ272X is supplied in cut tape and Digi-Reel® packaging and is suitable for applications where this packaging format is preferred or required. This part maintains identical electrical specifications and AEC-Q200 rating, with substantially higher inventory availability (428934 pieces). The anti-sulfur feature is not specified for this variant.

All parts are ROHS3 compliant with moisture sensitivity level 1 (unlimited shelf life) and are suitable for direct substitution in automotive and industrial applications requiring 2.7 kOhms ±5% 0.1W thick film resistors in 0402 package format.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U02J272X replace ERJ-S02J272X in production?

A: Yes. Both parts are identical in electrical specifications, mechanical dimensions, power rating, temperature coefficient, operating temperature range, and AEC-Q200 automotive qualification. The only differences are series designation and packaging method (both tape & reel). Substitution is direct.

Q: What is the difference between ERJ-2GEJ272X and ERJ-S02J272X?

A: Electrical specifications and mechanical dimensions are identical. The primary differences are series designation (ERJ-2G versus ERJ-S02) and packaging configuration (cut tape & Digi-Reel® versus tape & reel). The ERJ-2GEJ272X does not specify anti-sulfur coating, while the ERJ-S02J272X does.

Q: Are all three parts suitable for automotive applications?

A: Yes. All three parts carry AEC-Q200 automotive qualification and are rated for the same operating temperature range (-55°C ~ 155°C). All are suitable for automotive circuit applications.

Q: Does packaging type affect electrical performance?

A: No. Tape & reel and cut tape packaging formats do not affect electrical performance. Packaging selection is based on assembly process requirements and handling preferences.

Q: What is the moisture sensitivity level for these parts?

A: All three parts have moisture sensitivity level 1 (unlimited), indicating no moisture sensitivity and unlimited shelf life under standard storage conditions.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes, provided the assembly process accommodates the packaging format. Tape & reel packaged parts (ERJ-S02J272X and ERJ-U02J272X) are compatible with standard pick-and-place equipment. Cut tape packaged parts (ERJ-2GEJ272X) require compatible tape handling systems.