ERJ-S02J270X Equivalent & Substitute Parts

Part Overview

The ERJ-S02J270X is a 27 Ohm ±5% 0.1W thick film chip resistor in 0402 (1005 Metric) package manufactured by Panasonic Electronic Components. This component is designed for automotive applications with AEC-Q200 qualification and anti-sulfur protection. The part is currently in active production status with 758 units available in stock. Equivalent parts are identified when electrical specifications, mechanical dimensions, and compliance ratings are identical or functionally equivalent, enabling seamless substitution in circuit designs.

Substiute Parts

ERJ-S02J270X

Panasonic Electronic ComponentsIn Stock: 781ERJ-S02J270X Datasheet

Current PartRFQ

ERJ-2GEJ270X

Panasonic Electronic ComponentsIn Stock: 271476ERJ-2GEJ270X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The ERJ-2GEJ270X qualifies as a direct substitute for the ERJ-S02J270X based on the following critical parameters:

• Identical resistance value: 27 Ohms
• Identical tolerance: ±5%
• Identical power rating: 0.1W (1/10W)
• Identical package: 0402 (1005 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±200ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical automotive qualification: AEC-Q200
• Identical RoHS compliance: ROHS3 Compliant
• Identical moisture sensitivity level: 1 (Unlimited)

Both parts share identical electrical and mechanical specifications, enabling direct substitution in automotive and general-purpose applications.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S02J270X and ERJ-2GEJ270X are active production components from Panasonic Electronic Components with identical electrical and mechanical specifications. Selection between these parts may be based on inventory availability, lead time, or supply chain considerations. The ERJ-2GEJ270X currently has significantly higher inventory availability (271,367 units) compared to the ERJ-S02J270X (758 units). Both parts meet AEC-Q200 automotive qualification and ROHS3 compliance requirements, making them suitable for automotive and industrial applications requiring environmental and reliability standards.

Frequently Asked Questions (FAQ)

Q: Can ERJ-2GEJ270X be used as a direct replacement for ERJ-S02J270X?

A: Yes. Both parts have identical electrical specifications (27 Ohms ±5%, 0.1W), identical package dimensions (0402/1005 Metric), identical temperature characteristics (±200ppm/°C, -55°C ~ 155°C), and identical automotive qualification (AEC-Q200). Direct substitution is supported without circuit modification.

Q: Are there any differences in anti-sulfur protection between these parts?

A: The ERJ-S02J270X includes explicit anti-sulfur protection in its specification. The ERJ-2GEJ270X specification does not list this feature. For applications requiring anti-sulfur protection, verify with the manufacturer or design requirements before substitution.

Q: What is the significance of the 0402 package designation?

A: The 0402 package (1005 Metric) is a surface-mount chip resistor measuring 1.00mm length × 0.50mm width × 0.40mm maximum height. Both parts use this identical package, ensuring mechanical compatibility with PCB layouts and pick-and-place equipment.

Q: Do both parts meet automotive standards?

A: Yes. Both ERJ-S02J270X and ERJ-2GEJ270X carry AEC-Q200 qualification, which certifies compliance with automotive reliability and environmental stress testing requirements.

Q: What does ROHS3 compliance indicate?

A: ROHS3 compliance indicates the parts meet the Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, hexavalent chromium, and specified brominated flame retardants.