ERJ-S02J1R6X Equivalent & Substitute Parts

Part Overview

The ERJ-S02J1R6X is a 1.6 Ohm thick film chip resistor manufactured by Panasonic Electronic Components in the 0402 (1005 Metric) package format. This component is rated for 0.1W (1/10W) power dissipation with ±5% tolerance and features anti-sulfur construction with AEC-Q200 automotive qualification. The part is currently in active production status with 959 pieces available in stock. Substitute parts are identified to address packaging format variations and inventory availability while maintaining identical electrical and mechanical specifications.

Substiute Parts

ERJ-S02J1R6X

Panasonic Electronic ComponentsIn Stock: 1049ERJ-S02J1R6X Datasheet

Current PartRFQ

ERJ-U02J1R6X

Panasonic Electronic ComponentsIn Stock: 20027ERJ-U02J1R6X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between ERJ-S02J1R6X and ERJ-U02J1R6X is valid based on the following criteria:

Electrical Parameters (Identical):

• Resistance value: 1.6 Ohms
• Tolerance: ±5%
• Power rating: 0.1W (1/10W)
• Temperature coefficient: -100 / +600 ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Identical):

• Package format: 0402 (1005 Metric)
• Physical dimensions: 0.039" L x 0.020" W (1.00mm x 0.50mm)
• Height (seated maximum): 0.016" (0.40mm)
• Number of terminations: 2

Compliance & Ratings (Identical):

• Composition: Thick Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

Packaging Difference: The primary distinction between these parts is the supplier device packaging format. ERJ-S02J1R6X is supplied in standard packaging, while ERJ-U02J1R6X is supplied in Tape & Reel (TR) format. This difference does not affect electrical or mechanical performance and represents a packaging configuration variation only.

Parameter Comparison

Engineering Selection Recommendations

Both ERJ-S02J1R6X and ERJ-U02J1R6X are active production components from Panasonic Electronic Components with identical electrical and mechanical specifications. Selection between these parts is determined by packaging and procurement requirements rather than performance characteristics.

ERJ-S02J1R6X is appropriate for applications requiring standard packaging format with current inventory of 959 pieces available.

ERJ-U02J1R6X is appropriate for applications requiring Tape & Reel (TR) packaging format, typically used in automated assembly processes, with higher inventory availability of 19,956 pieces.

Both parts satisfy AEC-Q200 automotive qualification requirements, ROHS3 compliance, and unlimited moisture sensitivity level (MSL 1). The selection between these parts does not impact circuit performance, thermal characteristics, or regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U02J1R6X be used as a direct replacement for ERJ-S02J1R6X?

A: Yes. Both parts have identical electrical specifications (1.6 Ohms, ±5%, 0.1W), mechanical dimensions (0402 package), and automotive qualifications (AEC-Q200). The difference is packaging format only. ERJ-U02J1R6X uses Tape & Reel format while ERJ-S02J1R6X uses standard packaging.

Q: What is the primary difference between these two part numbers?

A: The primary difference is the supplier device packaging format. ERJ-S02J1R6X is supplied in standard packaging, while ERJ-U02J1R6X is supplied in Tape & Reel (TR) format. This affects procurement and assembly processes but not component performance.

Q: Are both parts suitable for automotive applications?

A: Yes. Both ERJ-S02J1R6X and ERJ-U02J1R6X carry AEC-Q200 automotive qualification and anti-sulfur construction, making them suitable for automotive circuit applications.

Q: Do these parts have the same operating temperature range?

A: Yes. Both parts operate across the identical temperature range of -55°C to 155°C with a temperature coefficient of -100 / +600 ppm/°C.

Q: Which part should be selected for automated assembly?

A: ERJ-U02J1R6X with Tape & Reel (TR) packaging is designed for automated assembly processes. ERJ-S02J1R6X in standard packaging is suitable for manual or semi-automated assembly.

Q: Are both parts RoHS compliant?

A: Yes. Both ERJ-S02J1R6X and ERJ-U02J1R6X are ROHS3 compliant and REACH unaffected.

Q: What is the moisture sensitivity level for these parts?

A: Both parts have Moisture Sensitivity Level (MSL) 1, which indicates unlimited shelf life without special moisture control requirements.