ERJ-S02J162X Equivalent & Substitute Parts

Part Overview

The ERJ-S02J162X is a 1.6 kOhms ±5% 0.1W chip resistor in 0402 (1005 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 910 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

ERJ-S02J162X

Panasonic Electronic ComponentsIn Stock: 925ERJ-S02J162X Datasheet

Current PartRFQ

ERJ-U02J162X

Panasonic Electronic ComponentsIn Stock: 20981ERJ-U02J162X Datasheet

DirectRFQ

ERJ-2GEJ162X

Panasonic Electronic ComponentsIn Stock: 66683ERJ-2GEJ162X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S02J162X are qualified based on the following critical parameters that determine functional and mechanical compatibility:

Electrical Parameters: Resistance value (1.6 kOhms), tolerance (±5%), power rating (0.1W), temperature coefficient (±200ppm/°C), and operating temperature range (-55°C ~ 155°C) must remain identical.

Mechanical Parameters: Package type (0402 / 1005 Metric), physical dimensions (0.039" L x 0.020" W, 1.00mm x 0.50mm), and height (0.016" / 0.40mm maximum) must match for PCB assembly compatibility.

Compliance Parameters: AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 rating are required for equivalent substitution.

Packaging Difference: The primary distinction between substitute parts is the delivery format (Tape & Reel versus Cut Tape & Digi-Reel), which affects procurement and assembly processes but does not impact electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ERJ-S02J162X, ERJ-U02J162X, and ERJ-2GEJ162X—are direct electrical and mechanical equivalents. Selection between them is determined by procurement and assembly requirements rather than technical performance:

ERJ-S02J162X (Primary Part): Use when Tape & Reel packaging is specified and current inventory levels are acceptable.

ERJ-U02J162X (Direct Equivalent): Use as a primary substitute when Tape & Reel packaging is required and higher inventory availability is advantageous. Identical electrical and mechanical specifications with anti-sulfur coating.

ERJ-2GEJ162X (Packaging Alternative): Use when Cut Tape or Digi-Reel packaging is preferred for assembly operations. Maintains all electrical and mechanical specifications; anti-sulfur feature is not specified but does not affect functional equivalence.

All parts maintain AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 rating, confirming suitability for high-reliability applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U02J162X be used as a direct replacement for ERJ-S02J162X? A: Yes. Both parts are identical in resistance (1.6 kOhms), tolerance (±5%), power rating (0.1W), package (0402), temperature coefficient (±200ppm/°C), operating range (-55°C ~ 155°C), and AEC-Q200 qualification. The difference is packaging format (Tape & Reel for both) and inventory availability.

Q: What is the difference between ERJ-2GEJ162X and the other two parts? A: ERJ-2GEJ162X is electrically and mechanically identical but supplied in Cut Tape and Digi-Reel packaging instead of Tape & Reel. The anti-sulfur feature is not specified for this variant, though all other specifications remain equivalent.

Q: Are these parts interchangeable on the PCB? A: Yes. All three parts share identical 0402 (1005 Metric) package dimensions, height (0.016" maximum), and termination configuration (2 terminations). They are mechanically interchangeable in PCB assembly.

Q: Do packaging differences affect electrical performance? A: No. Packaging format (Tape & Reel versus Cut Tape & Digi-Reel) affects only procurement and assembly logistics, not electrical characteristics or performance.

Q: Are all substitute parts automotive-qualified? A: Yes. All three parts carry AEC-Q200 automotive qualification and ROHS3 compliance, confirming suitability for automotive and high-reliability applications.

Q: Which part should be selected for new designs? A: Selection depends on assembly requirements and packaging preference. All three parts are active and equivalent. Tape & Reel format (ERJ-S02J162X or ERJ-U02J162X) is standard for automated assembly; Cut Tape format (ERJ-2GEJ162X) is suitable for manual or mixed-mode assembly.