Equivalent & Substitute Parts for ERJ-S02J131X

Part Overview

The ERJ-S02J131X is a 130 Ohms ±5% 0.1W chip resistor in 0402 (1005 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 705 pieces available in stock.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative series offerings from the same manufacturer.

Substiute Parts

ERJ-S02J131X

Panasonic Electronic ComponentsIn Stock: 789ERJ-S02J131X Datasheet

Current PartRFQ

ERJ-U02J131X

Panasonic Electronic ComponentsIn Stock: 8614ERJ-U02J131X Datasheet

DirectRFQ

ERJ-2GEJ131X

Panasonic Electronic ComponentsIn Stock: 185024ERJ-2GEJ131X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S02J131X is determined by strict equivalence across the following critical parameters:

• Resistance value: 130 Ohms
• Tolerance: ±5%
• Power rating: 0.1W (1/10W)
• Package: 0402 (1005 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3
• Moisture sensitivity: MSL 1

All identified substitutes maintain these electrical and mechanical specifications. Differences in series designation (ERJ-S02, ERJ-U02, ERJ-2G) reflect manufacturing series variations within Panasonic's product portfolio while preserving functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ERJ-S02J131X, ERJ-U02J131X, and ERJ-2GEJ131X—are functionally equivalent for applications requiring a 130 Ohms ±5% 0.1W thick film resistor in 0402 package with automotive AEC-Q200 qualification.

Selection between these parts should be based on:

• Inventory availability and lead time requirements
• Supply chain continuity and preferred supplier agreements
• Manufacturing series compatibility with existing bill of materials (BOM)
• Cost considerations across equivalent options

All parts maintain identical electrical performance, mechanical fit, and compliance certifications (ROHS3, AEC-Q200, MSL 1). No functional or reliability differences exist between the three options.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U02J131X be used as a direct replacement for ERJ-S02J131X?

A: Yes. Both parts share identical electrical specifications (130 Ohms ±5%, 0.1W), package dimensions (0402), temperature characteristics (±200ppm/°C, -55°C ~ 155°C), and automotive qualification (AEC-Q200). The difference in series designation reflects manufacturing series variation only.

Q: What is the difference between ERJ-2GEJ131X and ERJ-S02J131X?

A: The parts are electrically and mechanically equivalent. ERJ-2GEJ131X does not include anti-sulfur coating, while ERJ-S02J131X does. Both maintain AEC-Q200 qualification and identical performance parameters. Selection depends on application-specific environmental requirements and supply availability.

Q: Are all three parts suitable for automotive applications?

A: Yes. All three parts carry AEC-Q200 automotive qualification and are rated for -55°C ~ 155°C operating temperature, meeting automotive reliability standards.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes. All three parts have identical 0402 (1005 Metric) package dimensions and footprints. No PCB layout or assembly process modifications are required when substituting between these parts.

Q: What is the moisture sensitivity level for these resistors?

A: All three parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard handling and storage practices apply.