ERJ-S02J114X Equivalent & Substitute Parts

Part Overview

The ERJ-S02J114X is a 110 kOhms ±5% thick film chip resistor in 0402 (1005 Metric) package manufactured by Panasonic Electronic Components. This component is designed for automotive applications with AEC-Q200 qualification and anti-sulfur protection. The part is currently in active production status with 684 units available in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and automotive compliance ratings are maintained across alternative part numbers from the same manufacturer.

Substiute Parts

ERJ-S02J114X

Panasonic Electronic ComponentsIn Stock: 700ERJ-S02J114X Datasheet

Current PartRFQ

ERJ-2GEJ114X

Panasonic Electronic ComponentsIn Stock: 49086ERJ-2GEJ114X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S02J114X is determined by strict equivalence across the following parameters:

• Resistance value: 110 kOhms
• Tolerance: ±5%
• Power rating: 0.1W (1/10W)
• Package: 0402 (1005 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive compliance: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

The ERJ-2GEJ114X meets all these criteria and is classified as a direct substitute. Both parts are manufactured by Panasonic Electronic Components and share identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S02J114X and ERJ-2GEJ114X are active production parts manufactured by Panasonic Electronic Components with identical electrical and mechanical specifications. Selection between these parts may be based on inventory availability and supply chain considerations. The ERJ-S02J114X features anti-sulfur protection, while the ERJ-2GEJ114X does not specify this feature. Both parts maintain AEC-Q200 automotive qualification and ROHS3 compliance, making them suitable for automotive circuit applications requiring 110 kOhms ±5% resistance in 0402 package format.

Frequently Asked Questions (FAQ)

Q: Can ERJ-2GEJ114X be used as a direct replacement for ERJ-S02J114X?

A: Yes. Both parts share identical resistance (110 kOhms), tolerance (±5%), power rating (0.1W), package (0402), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive compliance (AEC-Q200). The primary difference is the anti-sulfur feature specified for the ERJ-S02J114X.

Q: Are there package compatibility concerns when substituting these parts?

A: No. Both parts use the 0402 (1005 Metric) package with identical dimensions (0.039" L x 0.020" W) and maximum seated height (0.016"). PCB footprints and assembly processes remain unchanged.

Q: Do both parts meet automotive standards?

A: Yes. Both the ERJ-S02J114X and ERJ-2GEJ114X carry AEC-Q200 qualification, meeting automotive reliability and quality requirements.

Q: What is the difference in anti-sulfur protection?

A: The ERJ-S02J114X explicitly includes anti-sulfur protection in its specification. The ERJ-2GEJ114X does not specify this feature. In applications where sulfur exposure is a concern, the ERJ-S02J114X is the specified choice.

Q: Are moisture sensitivity levels equivalent?

A: Yes. Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture bake-out requirement before soldering.