Panasonic ERJ-S02F8200X Equivalent & Substitute Parts

Part Overview

The Panasonic ERJ-S02F8200X is an 820 Ohm ±1% thick film chip resistor rated at 0.1W (1/10W) in 0402 (1005 Metric) package format. This component is designed for automotive applications and meets AEC-Q200 qualification standards with anti-sulfur protection. The part is currently in active production status with 1106 units available in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, supply chain considerations, or design flexibility needs.

Substiute Parts

ERJ-S02F8200X

Panasonic Electronic ComponentsIn Stock: 1143ERJ-S02F8200X Datasheet

Current PartRFQ

ERJ-U02F8200X

Panasonic Electronic ComponentsIn Stock: 6473ERJ-U02F8200X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S02F8200X is determined by strict equivalence across the following critical parameters:

• Resistance value: 820 Ohms
• Tolerance: ±1%
• Power rating: 0.1W (1/10W)
• Package format: 0402 (1005 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Anti-sulfur protection: Required
• RoHS compliance: ROHS3 Compliant

The ERJ-U02F8200X meets all specified parameters and qualifies as a direct substitute. Both parts are manufactured by Panasonic Electronic Components and share identical electrical and mechanical characteristics within the defined tolerance and performance envelope.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S02F8200X and ERJ-U02F8200X are active production components from Panasonic Electronic Components with identical electrical specifications, mechanical dimensions, and compliance certifications. Selection between these parts should be based on inventory availability and supply chain requirements. Both parts maintain ROHS3 compliance, AEC-Q200 automotive qualification, and unlimited moisture sensitivity rating (MSL 1), making them functionally interchangeable in automotive and industrial applications requiring 820 Ohm ±1% resistors in 0402 package format.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U02F8200X be used as a direct replacement for ERJ-S02F8200X?

A: Yes. Both parts share identical resistance value (820 Ohms), tolerance (±1%), power rating (0.1W), package format (0402), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive AEC-Q200 qualification. No circuit redesign or board layout modification is required.

Q: Are there any differences in the 0402 package dimensions between these parts?

A: No. Both parts conform to the same 0402 (1005 Metric) package specification with identical physical dimensions: 0.039" L x 0.020" W (1.00mm x 0.50mm) and maximum seated height of 0.016" (0.40mm).

Q: Do both parts meet the same compliance and certification standards?

A: Yes. Both ERJ-S02F8200X and ERJ-U02F8200X are ROHS3 compliant, AEC-Q200 qualified, REACH unaffected, and feature anti-sulfur protection suitable for automotive applications.

Q: What is the difference between the ERJ-S02 and ERJ-U02 series designations?

A: The series designation reflects the internal product line classification within Panasonic's resistor portfolio. Both series meet identical electrical and mechanical specifications for this 820 Ohm ±1% 0402 resistor configuration.

Q: Are moisture sensitivity considerations the same for both parts?

A: Yes. Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage, handling, or assembly processes.