ERJ-S02F6R80X Equivalent & Substitute Parts

Part Overview

The ERJ-S02F6R80X is a 6.8 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 0402 (1005 Metric) package format. This component is rated for 0.1W (1/10W) power dissipation and features anti-sulfur construction with AEC-Q200 automotive qualification. The part is currently in active production status with 784 pieces available in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications are matched across alternative product series within the same manufacturer portfolio.

Substiute Parts

ERJ-S02F6R80X

Panasonic Electronic ComponentsIn Stock: 883ERJ-S02F6R80X Datasheet

Current PartRFQ

ERJ-U02F6R80X

Panasonic Electronic ComponentsIn Stock: 3589ERJ-U02F6R80X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ERJ-S02F6R80X is determined by strict equivalence across the following critical parameters:

Electrical Specifications: Resistance value (6.8 Ohms), tolerance (±1%), and power rating (0.1W) must be identical. Temperature coefficient range (-100 / +600 ppm/°C) and operating temperature limits (-55°C ~ 155°C) must match.

Mechanical Specifications: Package format (0402 / 1005 Metric), physical dimensions (0.039" L x 0.020" W / 1.00mm x 0.50mm), and seated height (0.016" / 0.40mm maximum) must be identical. Number of terminations (2) is fixed.

Compliance & Certifications: AEC-Q200 automotive rating, anti-sulfur construction, ROHS3 compliance, and MSL 1 classification must be maintained. REACH and ECCN classifications must remain consistent.

Packaging Format: Tape & Reel (TR) configuration applies to both primary and substitute parts.

The ERJ-U02F6R80X qualifies as a direct substitute based on complete alignment with all specified parameters across electrical, mechanical, and compliance categories.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S02F6R80X and ERJ-U02F6R80X are active production components manufactured by Panasonic Electronic Components with identical electrical and mechanical specifications. Selection between these parts is based on inventory availability and supply chain considerations rather than technical performance differences.

The ERJ-S02F6R80X (ERJ-S02 series) currently maintains 784 pieces in stock inventory. The ERJ-U02F6R80X (ERJ-U02 series) provides an alternative with 3,533 pieces in stock, offering greater availability for high-volume applications or extended lead-time requirements.

Both parts maintain full AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 moisture sensitivity classification. Thermal performance, resistance tolerance, and dimensional specifications are identical across both options. Either part is suitable for direct substitution in applications requiring a 6.8 Ohm ±1% 0.1W thick film chip resistor in 0402 package format with anti-sulfur automotive-grade construction.

Frequently Asked Questions (FAQ)

Q: Can the ERJ-U02F6R80X be used as a direct replacement for the ERJ-S02F6R80X?

A: Yes. The ERJ-U02F6R80X is a direct substitute. Both parts share identical resistance (6.8 Ohms), tolerance (±1%), power rating (0.1W), package format (0402), temperature coefficient (-100 / +600 ppm/°C), operating temperature range (-55°C ~ 155°C), and all compliance certifications (AEC-Q200, ROHS3, MSL 1).

Q: Are there any differences in physical dimensions between these parts?

A: No. Both parts have identical physical dimensions: 0.039" length x 0.020" width (1.00mm x 0.50mm) and maximum seated height of 0.016" (0.40mm). They are mechanically interchangeable in PCB layouts.

Q: Do both parts meet automotive specifications?

A: Yes. Both the ERJ-S02F6R80X and ERJ-U02F6R80X carry AEC-Q200 automotive qualification and feature anti-sulfur construction, making them suitable for automotive applications requiring reliability in harsh environments.

Q: What is the difference between the ERJ-S02 and ERJ-U02 series designations?

A: The series designation (S02 versus U02) indicates different product lines within Panasonic's resistor portfolio. Both series offer identical electrical and mechanical specifications for this 6.8 Ohm value, with the primary distinction being inventory availability and manufacturing batch tracking.

Q: Are both parts RoHS compliant?

A: Yes. Both the ERJ-S02F6R80X and ERJ-U02F6R80X are ROHS3 compliant and REACH unaffected, meeting environmental regulatory requirements for electronic component manufacturing and distribution.

Q: What is the moisture sensitivity level for these parts?

A: Both parts are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. These components can be stored and handled without special moisture control measures.

Q: Can these parts be used interchangeably in tape and reel packaging?

A: Yes. Both parts are supplied in Tape & Reel (TR) format, maintaining compatibility with automated pick-and-place assembly equipment and standard component handling processes.