ERJ-S02F6R20X Equivalent & Substitute Parts

Part Overview

The ERJ-S02F6R20X is a 6.2 Ohm ±1% thick film chip resistor rated at 0.1W (1/10W) in 0402 (1005 Metric) package format. This component is manufactured by Panasonic Electronic Components and features anti-sulfur properties with automotive AEC-Q200 qualification. The part is currently in active production status with 1036 pieces available in inventory. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when packaging configurations differ.

Substiute Parts

ERJ-S02F6R20X

Panasonic Electronic ComponentsIn Stock: 1127ERJ-S02F6R20X Datasheet

Current PartRFQ

ERJ-U02F6R20X

Panasonic Electronic ComponentsIn Stock: 8110ERJ-U02F6R20X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ERJ-S02F6R20X is determined by electrical and mechanical parameter equivalence. The substitute part ERJ-U02F6R20X maintains identical electrical specifications: 6.2 Ohm resistance value, ±1% tolerance, 0.1W power rating, and thick film composition. Both parts share the same 0402 (1005 Metric) package footprint, identical physical dimensions (0.039" L x 0.020" W / 1.00mm x 0.50mm), and maximum seated height of 0.016" (0.40mm). Environmental and compliance parameters are equivalent: both operate across -55°C to 155°C, feature anti-sulfur properties, carry AEC-Q200 automotive qualification, maintain ROHS3 compliance, and possess MSL 1 rating. The primary distinction between these parts is the packaging configuration: ERJ-S02F6R20X is supplied in standard packaging, while ERJ-U02F6R20X is supplied in Tape & Reel (TR) format. This difference affects inventory management and automated assembly processes but does not alter component functionality or electrical performance.

Parameter Comparison

Engineering Selection Recommendations

Both ERJ-S02F6R20X and ERJ-U02F6R20X are active production components from Panasonic Electronic Components with full compliance to automotive and environmental standards. Selection between these parts is based on packaging and supply chain requirements rather than electrical or mechanical performance differences.

The ERJ-S02F6R20X in standard packaging is suitable for applications requiring manual component handling, small-volume production runs, or mixed-component kits. The ERJ-U02F6R20X in Tape & Reel format is optimized for high-volume automated assembly processes and surface mount technology (SMT) production lines.

Both parts maintain identical electrical performance across the specified operating temperature range of -55°C to 155°C and are qualified for automotive applications under AEC-Q200 standards. ROHS3 compliance and REACH unaffected status confirm environmental regulatory alignment for both variants. The MSL 1 rating indicates unlimited shelf life under standard storage conditions for both parts.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U02F6R20X replace ERJ-S02F6R20X in circuit design?

A: Yes. Both parts are electrically and mechanically identical with 6.2 Ohm resistance, ±1% tolerance, 0.1W power rating, and 0402 package footprint. The only difference is packaging format (Tape & Reel versus standard packaging), which does not affect circuit performance.

Q: What is the primary difference between these two part numbers?

A: The ERJ-S02F6R20X is supplied in standard packaging, while the ERJ-U02F6R20X is supplied in Tape & Reel (TR) format. This distinction affects inventory management and assembly methodology but not component specifications or performance.

Q: Are both parts suitable for automotive applications?

A: Yes. Both ERJ-S02F6R20X and ERJ-U02F6R20X carry AEC-Q200 automotive qualification and feature anti-sulfur properties, making them suitable for automotive-grade circuit designs.

Q: Do these parts have different temperature operating ranges?

A: No. Both parts operate identically across the -55°C to 155°C temperature range with the same temperature coefficient of -100 / +600 ppm/°C.

Q: Which part should be selected for automated SMT assembly?

A: The ERJ-U02F6R20X in Tape & Reel format is designed for automated surface mount technology production lines and high-volume manufacturing processes.

Q: Are both parts RoHS compliant?

A: Yes. Both ERJ-S02F6R20X and ERJ-U02F6R20X are ROHS3 compliant and REACH unaffected, meeting current environmental regulatory requirements.

Q: What is the moisture sensitivity level for these resistors?

A: Both parts have MSL 1 rating, indicating unlimited shelf life under standard storage conditions with no moisture sensitivity restrictions.