ERJ-S02F68R0X Equivalent & Substitute Parts

Part Overview

The ERJ-S02F68R0X is a 68 Ohm ±1% thick film chip resistor in 0402 (1005 Metric) package rated for 0.1W power dissipation. Manufactured by Panasonic Electronic Components, this component features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and harsh environment applications. The part is currently in active production status with 1092 units in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative part numbers or manufacturers.

Substiute Parts

ERJ-S02F68R0X

Panasonic Electronic ComponentsIn Stock: 1202ERJ-S02F68R0X Datasheet

Current PartRFQ

ERJ-U02F68R0X

Panasonic Electronic ComponentsIn Stock: 8542ERJ-U02F68R0X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S02F68R0X is determined by strict equivalence across the following parameters:

• Resistance value: 68 Ohms
• Tolerance: ±1%
• Power rating: 0.1W
• Package: 0402 (1005 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Anti-sulfur feature requirement
• RoHS3 compliance
• MSL rating: 1

The ERJ-U02F68R0X qualifies as a direct substitute based on identical electrical specifications, mechanical dimensions, and compliance certifications. Both parts are manufactured by Panasonic Electronic Components and maintain the same performance characteristics across all critical parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S02F68R0X and ERJ-U02F68R0X are active production components from Panasonic Electronic Components with identical electrical and mechanical specifications. Selection between these parts may be based on inventory availability, lead time, or supply chain considerations. The ERJ-U02F68R0X currently has higher inventory availability at 8437 units compared to 1092 units for the ERJ-S02F68R0X. Both parts maintain full compliance with ROHS3, AEC-Q200 automotive qualification, and unlimited moisture sensitivity rating, making them suitable for equivalent circuit applications without design modification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U02F68R0X be used as a direct replacement for ERJ-S02F68R0X?

A: Yes. Both parts share identical resistance value, tolerance, power rating, package dimensions, temperature coefficient, operating temperature range, and automotive AEC-Q200 qualification. No circuit redesign is required.

Q: Are there any differences in the 0402 package dimensions between these parts?

A: No. Both parts conform to the same 0402 (1005 Metric) package specification with identical physical dimensions: 0.039" L x 0.020" W (1.00mm x 0.50mm) and maximum seated height of 0.016" (0.40mm).

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both ERJ-S02F68R0X and ERJ-U02F68R0X carry AEC-Q200 automotive qualification and anti-sulfur coating, meeting the same reliability and environmental standards.

Q: What is the significance of the series designation difference (ERJ-S02 vs ERJ-U02)?

A: The series designation indicates different product lines within Panasonic's resistor portfolio. Despite the different series numbers, these parts maintain identical electrical performance and mechanical compatibility for the specified 68 Ohm, ±1%, 0.1W, 0402 package configuration.

Q: Are both parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and use.