ERJ-S02F1R30X Equivalent & Substitute Parts

Part Overview

The ERJ-S02F1R30X is a 1.3 Ohm ±1% thick film chip resistor rated at 0.1W (1/10W) in 0402 (1005 Metric) package format. This component is manufactured by Panasonic Electronic Components and is designed for automotive applications with AEC-Q200 qualification and anti-sulfur construction. The part maintains active product status with 948 units currently in stock. Substitute parts are identified to address inventory availability, packaging format requirements, or supply chain continuity while maintaining identical electrical and mechanical specifications.

Substiute Parts

ERJ-S02F1R30X

Panasonic Electronic ComponentsIn Stock: 997ERJ-S02F1R30X Datasheet

Current PartRFQ

ERJ-U02F1R30X

Panasonic Electronic ComponentsIn Stock: 11854ERJ-U02F1R30X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ERJ-S02F1R30X with the ERJ-U02F1R30X is based on electrical and mechanical parameter equivalence. Both parts share identical specifications across all critical selection criteria: 1.3 Ohm resistance value, ±1% tolerance, 0.1W power rating, 0402 package format, thick film composition, temperature coefficient range, operating temperature limits, AEC-Q200 automotive qualification, anti-sulfur construction, and environmental compliance certifications (ROHS3, REACH Unaffected).

The primary distinction between these parts is the packaging format. The ERJ-S02F1R30X is supplied in standard packaging, while the ERJ-U02F1R30X is supplied in Tape & Reel (TR) format. This difference affects handling, storage, and automated assembly processes but does not alter the functional or electrical characteristics of the component.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S02F1R30X and ERJ-U02F1R30X are active products from Panasonic Electronic Components with full compliance to automotive standards and environmental regulations. Selection between these parts should be based on assembly and supply chain requirements rather than electrical performance.

The ERJ-S02F1R30X is appropriate for applications requiring standard packaging formats with moderate inventory volumes. The ERJ-U02F1R30X in Tape & Reel format is suitable for high-volume automated assembly operations where reel-based component feeding is standard practice. Both parts maintain identical electrical characteristics, thermal performance, and reliability ratings under specified operating conditions.

Frequently Asked Questions (FAQ)

Q: Are the ERJ-S02F1R30X and ERJ-U02F1R30X electrically identical?

A: Yes. Both parts have identical resistance value (1.3 Ohms), tolerance (±1%), power rating (0.1W), temperature coefficient (-100 / +600 ppm/°C), and operating temperature range (-55°C ~ 155°C). They are functionally equivalent in all electrical parameters.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. The ERJ-S02F1R30X uses standard packaging, while the ERJ-U02F1R30X is supplied in Tape & Reel (TR) format. The physical component dimensions and electrical specifications remain identical.

Q: Can I use ERJ-U02F1R30X in place of ERJ-S02F1R30X in my design?

A: Yes, provided your assembly process supports Tape & Reel component feeding. The component itself is identical; only the delivery format differs.

Q: Are both parts AEC-Q200 qualified?

A: Yes. Both the ERJ-S02F1R30X and ERJ-U02F1R30X carry AEC-Q200 automotive qualification and anti-sulfur construction, making them suitable for automotive applications.

Q: Do these parts have the same moisture sensitivity rating?

A: Yes. Both parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without special moisture control requirements.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the ERJ-S02F1R30X and ERJ-U02F1R30X are ROHS3 compliant and REACH unaffected, meeting current environmental regulations.

Q: Which part should I select for high-volume production?

A: The ERJ-U02F1R30X in Tape & Reel format is optimized for high-volume automated assembly. The ERJ-S02F1R30X standard packaging is suitable for lower-volume or manual assembly processes.