ERJ-S02F16R0X Equivalent & Substitute Parts

Part Overview

The ERJ-S02F16R0X is a 16 Ohm ±1% 0.1W chip resistor in 0402 (1005 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and harsh environment applications. The part is currently in active production status with 1011 pieces available in stock. Substitute parts are identified when electrical specifications, mechanical dimensions, and compliance ratings remain identical across alternative series designations.

Substiute Parts

ERJ-S02F16R0X

Panasonic Electronic ComponentsIn Stock: 1078ERJ-S02F16R0X Datasheet

Current PartRFQ

ERJ-U02F16R0X

Panasonic Electronic ComponentsIn Stock: 8607ERJ-U02F16R0X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The ERJ-U02F16R0X qualifies as a direct substitute for the ERJ-S02F16R0X based on identical electrical and mechanical specifications. Both parts share the following critical parameters that determine substitutability:

• Resistance value: 16 Ohms
• Tolerance: ±1%
• Power rating: 0.1W
• Package designation: 0402 (1005 Metric)
• Physical dimensions: 0.039" L x 0.020" W (1.00mm x 0.50mm)
• Height seated maximum: 0.016" (0.40mm)
• Composition: Thick Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Compliance: ROHS3, AEC-Q200
• Moisture sensitivity: MSL 1

The substitution is based on functional equivalence across all provided electrical and mechanical parameters. The difference between ERJ-S02 and ERJ-U02 series designations does not affect component performance within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

Both ERJ-S02F16R0X and ERJ-U02F16R0X are active production components from Panasonic Electronic Components with identical electrical performance and mechanical compatibility. Selection between these parts may be based on inventory availability: ERJ-S02F16R0X has 1011 pieces in stock, while ERJ-U02F16R0X has 8542 pieces available. Both parts maintain ROHS3 compliance and AEC-Q200 automotive qualification, ensuring suitability for regulated applications. The identical parameter specifications across resistance, tolerance, power rating, package dimensions, temperature range, and composition confirm direct interchangeability in circuit design and PCB assembly.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U02F16R0X replace ERJ-S02F16R0X in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters including resistance value, tolerance, power rating, package dimensions, and operating temperature range. Direct substitution is supported without circuit redesign.

Q: Are there any differences in the 0402 package dimensions between these parts?

A: No. Both parts conform to identical 0402 (1005 Metric) package specifications with dimensions of 0.039" L x 0.020" W (1.00mm x 0.50mm) and maximum seated height of 0.016" (0.40mm).

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both ERJ-S02F16R0X and ERJ-U02F16R0X carry AEC-Q200 automotive qualification and feature anti-sulfur coating, making them suitable for automotive and harsh environment applications.

Q: What is the difference between the ERJ-S02 and ERJ-U02 series designations?

A: The series designation difference does not affect the electrical or mechanical specifications provided for these parts. Both series maintain identical performance parameters for this 16 Ohm resistor value.

Q: Are moisture sensitivity considerations the same for both parts?

A: Yes. Both parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.

Q: Can these parts be used interchangeably in tape and reel packaging?

A: Yes. Both parts are supplied in Tape & Reel (TR) packaging format, maintaining compatibility with automated assembly equipment and processes.