ERJ-P14F2000U Equivalent & Substitute Parts

Part Overview

The ERJ-P14F2000U is a 200 Ohm ±1% thick film chip resistor rated at 0.5W (1/2W) in a 1210 (3225 Metric) package. This component is manufactured by Panasonic Electronic Components and is qualified to the AEC-Q200 automotive standard with pulse withstanding capability. The part is currently in active production status with 819 units available in stock.

Substitute parts are necessary when the primary part becomes unavailable, when design revisions require alternative sourcing, or when inventory constraints necessitate qualified alternatives that meet identical electrical and mechanical specifications.

Substiute Parts

ERJ-P14F2000U

Panasonic Electronic ComponentsIn Stock: 908ERJ-P14F2000U Datasheet

Current PartRFQ

ERJ-14NF2000U

Panasonic Electronic ComponentsIn Stock: 4534ERJ-14NF2000U Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-P14F2000U is determined by strict equivalence across the following parameters:

• Resistance value: 200 Ohms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Package: 1210 (3225 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

The ERJ-14NF2000U meets all electrical and mechanical parameters required for direct substitution. This part is qualified to the same AEC-Q200 automotive standard and operates within identical temperature and tolerance specifications. The primary distinction is product lifecycle status.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-P14F2000U is the preferred selection for new designs due to its active product status. This ensures long-term availability and continued manufacturer support.

The ERJ-14NF2000U is electrically and mechanically equivalent and carries identical AEC-Q200 automotive qualification and ROHS3 compliance. However, this part is designated "Not For New Designs," indicating it is in end-of-life phase. Selection of ERJ-14NF2000U is appropriate only for:

• Replacement or repair of existing assemblies
• Continuation of legacy product lines where design change is not feasible
• Temporary supply solutions when the primary part is unavailable

Both parts are manufactured by Panasonic Electronic Components and meet all automotive and environmental compliance requirements specified for this application category.

Frequently Asked Questions (FAQ)

Q: Can ERJ-14NF2000U be used as a direct replacement for ERJ-P14F2000U in new designs?

A: No. While ERJ-14NF2000U is electrically and mechanically equivalent, its "Not For New Designs" status indicates end-of-life phase. New designs should specify ERJ-P14F2000U to ensure long-term supply continuity.

Q: Are the electrical characteristics identical between these parts?

A: Yes. Both parts have 200 Ohm resistance at ±1% tolerance, 0.5W power rating, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range.

Q: Do both parts fit the same PCB footprint?

A: Yes. Both parts use the 1210 (3225 Metric) package with identical dimensions: 0.126" L x 0.098" W (3.20mm x 2.50mm) and maximum seated height of 0.028" (0.70mm).

Q: Are both parts AEC-Q200 qualified?

A: Yes. Both ERJ-P14F2000U and ERJ-14NF2000U carry AEC-Q200 automotive qualification and are ROHS3 compliant.

Q: What is the difference between these parts?

A: The primary difference is product lifecycle status. ERJ-P14F2000U is in active production, while ERJ-14NF2000U is not recommended for new designs. All electrical, mechanical, and compliance specifications are identical.