Equivalent & Substitute Parts for ERJ-P06F2000V

Part Overview

The ERJ-P06F2000V is a 200 Ohm ±1% 0.5W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This component is rated for automotive applications under AEC-Q200 standard with pulse withstanding capability. The part is currently in active production status with 870 pieces available in inventory. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and design optimization across compatible electrical and mechanical specifications.

Substiute Parts

ERJ-P06F2000V

Panasonic Electronic ComponentsIn Stock: 946ERJ-P06F2000V Datasheet

Current PartRFQ

CRCW0805200RFKEAHP

Vishay DaleIn Stock: 9403CRCW0805200RFKEAHP Datasheet

DirectRFQ

ESR10EZPF2000

Rohm SemiconductorIn Stock: 60053ESR10EZPF2000 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-P06F2000V are qualified based on the following critical parameters:

Electrical Parameters (Must Match):

• Resistance value: 200 Ohms
• Tolerance: ±1%
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive rating: AEC-Q200

Mechanical Parameters (Must Match):

• Package / Case: 0805 (2012 Metric)
• Composition: Thick Film
• Number of terminations: 2

Compliance Parameters (Must Match):

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The identified substitute parts meet all critical electrical, mechanical, and compliance requirements. Variations in power rating and physical height are noted but do not preclude substitution when circuit design permits.

Parameter Comparison

Engineering Selection Recommendations

CRCW0805200RFKEAHP (Vishay Dale) is a direct equivalent substitute. This part maintains identical electrical specifications, power rating, and physical dimensions as the ERJ-P06F2000V. Both components are AEC-Q200 rated, ROHS3 compliant, and feature pulse withstanding capability. The CRCW0805200RFKEAHP is suitable for one-to-one replacement in automotive and industrial applications.

ESR10EZPF2000 (Rohm Semiconductor) is a compatible substitute with a reduced power rating of 0.4W compared to the 0.5W specification of the primary part. This component meets all electrical tolerance, temperature coefficient, and operating temperature requirements. The ESR10EZPF2000 is appropriate for applications where the circuit design accommodates the lower power dissipation specification. All compliance certifications and automotive ratings are equivalent.

Both substitute parts are in active production status with substantial inventory availability, supporting reliable procurement and supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can CRCW0805200RFKEAHP be used as a direct replacement for ERJ-P06F2000V?

A: Yes. The CRCW0805200RFKEAHP meets all critical electrical parameters (200 Ohms ±1%, ±100ppm/°C temperature coefficient), mechanical specifications (0805 package, thick film composition), and compliance requirements (AEC-Q200, ROHS3). Physical height variation (0.020" vs 0.028") is within acceptable tolerance for standard PCB assembly processes.

Q: What is the key difference between ESR10EZPF2000 and the primary part?

A: The ESR10EZPF2000 has a power rating of 0.4W compared to the 0.5W rating of ERJ-P06F2000V. All other electrical and mechanical parameters are identical. Substitution is valid when circuit power dissipation requirements do not exceed 0.4W.

Q: Are all three parts suitable for automotive applications?

A: Yes. ERJ-P06F2000V, CRCW0805200RFKEAHP, and ESR10EZPF2000 are all AEC-Q200 rated and designed for automotive use. All three parts meet the same temperature range (-55°C ~ 155°C) and reliability standards.

Q: What is the significance of the 0805 package specification?

A: The 0805 (2012 Metric) package is a standardized surface mount resistor footprint measuring 2.00mm × 1.25mm. All three parts use this identical package, ensuring mechanical and electrical compatibility on the same PCB layout without design modification.

Q: Do all substitute parts have the same moisture sensitivity rating?

A: Yes. All three parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly processes.