ERJ-6RBD7320V Equivalent & Substitute Parts

Part Overview

The ERJ-6RBD7320V is a 732 Ohm ±0.5% 0.1W chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor meets automotive AEC-Q200 qualification and operates across -55°C to 155°C. The part is active in production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when design requirements allow for increased power rating or improved tolerance specifications while maintaining core electrical and mechanical compatibility.

Substiute Parts

ERJ-6RBD7320V

Panasonic Electronic ComponentsIn Stock: 662ERJ-6RBD7320V Datasheet

Current PartRFQ

ERJ-PB6B7320V

Panasonic Electronic ComponentsIn Stock: 4996ERJ-PB6B7320V Datasheet

UpgradeRFQ

ERJ-PB6D7320V

Panasonic Electronic ComponentsIn Stock: 704ERJ-PB6D7320V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for ERJ-6RBD7320V is permissible when the following conditions are met:

The substitute part must maintain identical resistance value (732 Ohms) and package configuration (0805/2012 Metric). The substitute must preserve or exceed the tolerance specification and power rating of the original part. All substitute parts must retain AEC-Q200 automotive qualification, operating temperature range (-55°C to 155°C), and RoHS3 compliance status.

Two substitute parts meet these criteria:

ERJ-PB6B7320V provides improved tolerance (±0.1% versus ±0.5%) and increased power rating (0.25W versus 0.1W) with pulse withstanding capability.

ERJ-PB6D7320V provides increased power rating (0.25W versus 0.1W) with pulse withstanding capability while maintaining the original ±0.5% tolerance.

Both substitutes are manufactured by Panasonic Electronic Components in the same 0805 package with identical mechanical dimensions and thermal characteristics.

Parameter Comparison

Engineering Selection Recommendations

ERJ-6RBD7320V remains the appropriate selection when circuit design specifies 0.1W power dissipation and ±0.5% tolerance is acceptable. The part is active in production with full automotive qualification and compliance certifications.

ERJ-PB6B7320V is suitable when circuit design permits 0.25W power rating and requires improved tolerance specification (±0.1%). This part provides enhanced precision and pulse withstanding capability within the same package footprint.

ERJ-PB6D7320V is suitable when circuit design permits 0.25W power rating while maintaining ±0.5% tolerance specification. This part provides increased power margin and pulse withstanding capability within the same package footprint.

All three parts are active production items with identical mechanical compatibility, thermal characteristics, and automotive compliance status. Selection between these parts depends solely on circuit power dissipation requirements and tolerance specifications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B7320V or ERJ-PB6D7320V be used as direct replacements for ERJ-6RBD7320V?

A: Yes, both substitute parts are mechanically and electrically compatible. They share identical 0805 package dimensions, resistance value (732 Ohms), operating temperature range, and AEC-Q200 automotive qualification. The substitutes provide equal or improved performance specifications.

Q: What is the difference between ERJ-PB6B7320V and ERJ-PB6D7320V?

A: Both parts offer 0.25W power rating and pulse withstanding capability. ERJ-PB6B7320V provides ±0.1% tolerance, while ERJ-PB6D7320V maintains ±0.5% tolerance. Selection depends on circuit tolerance requirements.

Q: Are there any package or footprint differences between these parts?

A: No. All three parts use identical 0805 (2012 Metric) package with dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm) and maximum seated height of 0.028" (0.70mm). PCB footprints are identical.

Q: Do all parts meet automotive standards?

A: Yes. ERJ-6RBD7320V, ERJ-PB6B7320V, and ERJ-PB6D7320V all carry AEC-Q200 automotive qualification and ROHS3 compliance certification.

Q: What is the temperature coefficient specification for these resistors?

A: All three parts specify ±50ppm/°C temperature coefficient across the -55°C to 155°C operating range.

Q: Are moisture sensitivity considerations different between these parts?

A: No. All three parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.