ERJ-1TNF30R9U Equivalent & Substitute Parts

Part Overview

The ERJ-1TNF30R9U is a 30.9 Ohms ±1% 1W thick film chip resistor in 2512 (6432 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and operates across -55°C to 155°C. The product status is Not For New Designs, making equivalent and substitute parts necessary for ongoing production and design updates. Alternative parts from active product lines provide equivalent electrical performance with enhanced features or improved availability.

Key Parameters

Parameter	Value
Resistance	30.9 Ohms
Tolerance	±1%
Power Rating	1W
Package / Case	2512 (6432 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the ERJ-1TNF30R9U is determined by strict equivalence in the following parameters: resistance value (30.9 Ohms), tolerance (±1%), package type (2512), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive AEC-Q200 rating. Parts are grouped into three categories based on substitution type:

Direct Equivalents (Same Electrical & Mechanical Specifications): Parts with identical resistance, tolerance, power rating (1W), package dimensions, and AEC-Q200 certification. These provide one-to-one replacement capability.

Upgrade Substitutes (Enhanced Features or Higher Power Rating): Parts that maintain all core electrical parameters but add features such as anti-sulfur protection, moisture resistance, or higher power ratings (1.5W or 2W). These are suitable for designs requiring additional performance margins or environmental protection.

Similar Parts (Equivalent Electrical Performance, Minor Dimensional Variations): Parts meeting all electrical specifications with package dimensions within acceptable tolerance ranges for the 2512 form factor.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Operating Temp	AEC-Q200	Product Status	RoHS Status	Inventory (Pcs)
ERJ-1TNF30R9U	Panasonic	30.9 Ω	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	Yes	Not For New Designs	ROHS3	4522
ERJ-S1TF30R9U	Panasonic	30.9 Ω	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	Yes	Active	ROHS3	927
CRCW251230R9FKEG	Vishay Dale	30.9 Ω	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	Yes	Active	ROHS3	816
CRCW251230R9FKTG	Vishay Dale	30.9 Ω	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	Yes	Active	RoHS Non-Compliant	1068
RMCF2512FT30R9	Stackpole Electronics	30.9 Ω	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	Yes	Active	ROHS3	1105
AC2512FK-0730R9L	YAGEO	30.9 Ω	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	Yes	Active	ROHS3	1018
CRCW251230R9FKEGHP	Vishay Dale	30.9 Ω	±1%	1.5	2512	±100ppm/°C	-55°C ~ 155°C	Yes	Active	ROHS3	744
RHC2512FT30R9	Stackpole Electronics	30.9 Ω	±1%	2	2512	±100ppm/°C	-55°C ~ 155°C	No	Active	ROHS3	709
RC2512FK-0730R9L	YAGEO	30.9 Ω	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	No	Active	ROHS3	943
RC6432F30R9CS	Samsung Electro-Mechanics	30.9 Ω	±1%	1	2512	±100ppm/°C	-55°C ~ 155°C	No	Active	ROHS3	1116

Engineering Selection Recommendations

For Direct Replacement with Active Product Status: ERJ-S1TF30R9U (Panasonic) is the primary recommended substitute. It maintains identical electrical and mechanical specifications as the ERJ-1TNF30R9U while offering active product status and anti-sulfur protection. This part is suitable for new designs and ongoing production requiring Panasonic sourcing continuity.

For Multi-Source Qualification: CRCW251230R9FKEG (Vishay Dale) and RMCF2512FT30R9 (Stackpole Electronics) provide equivalent direct replacements with active product status and full ROHS3 compliance. Both are suitable for designs requiring automotive AEC-Q200 certification and offer independent supplier options.

For Enhanced Performance Margins: CRCW251230R9FKEGHP (Vishay Dale) provides 1.5W power rating with pulse withstanding capability, suitable for applications requiring higher transient stress tolerance while maintaining the same 30.9 Ohm resistance and ±1% tolerance.

For Moisture-Resistant Applications: AC2512FK-0730R9L (YAGEO) and RC2512FK-0730R9L (YAGEO) incorporate moisture-resistant features with active product status. These are suitable for environments with elevated humidity or condensation exposure.

For Higher Power Dissipation: RHC2512FT30R9 (Stackpole Electronics) offers 2W power rating with moisture-resistant composition. Note that this part does not carry AEC-Q200 certification; use only in non-automotive applications or where automotive qualification is not required.

Avoid for New Designs: CRCW251230R9FKTG (Vishay Dale) is RoHS non-compliant and REACH-affected. RC2512FK-0730R9L and RC6432F30R9CS do not carry AEC-Q200 certification and should not be used in automotive applications requiring this qualification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S1TF30R9U replace ERJ-1TNF30R9U in existing designs? A: Yes. ERJ-S1TF30R9U is a direct electrical and mechanical equivalent with identical resistance (30.9 Ω), tolerance (±1%), power rating (1W), package (2512), and operating temperature range (-55°C ~ 155°C). The addition of anti-sulfur protection makes it suitable for the same applications with enhanced environmental performance.

Q: What is the difference between direct equivalents and upgrade substitutes? A: Direct equivalents (ERJ-S1TF30R9U, CRCW251230R9FKEG, RMCF2512FT30R9) maintain identical 1W power ratings and all core electrical specifications. Upgrade substitutes (CRCW251230R9FKEGHP at 1.5W, RHC2512FT30R9 at 2W) provide higher power dissipation capability while maintaining the same resistance and tolerance values, suitable for designs requiring additional thermal margin.

Q: Are all substitute parts AEC-Q200 certified? A: No. ERJ-S1TF30R9U, CRCW251230R9FKEG, CRCW251230R9FKTG, RMCF2512FT30R9, AC2512FK-0730R9L, and CRCW251230R9FKEGHP carry AEC-Q200 certification. RHC2512FT30R9, RC2512FK-0730R9L, and RC6432F30R9CS do not. Use only AEC-Q200 certified parts for automotive applications.

Q: What are the package dimension tolerances between substitute parts? A: All parts use the 2512 (6432 Metric) package form factor. Dimensional variations are minor: most parts measure 0.248" L × 0.124" W (6.30mm × 3.15mm), while YAGEO parts (AC2512FK-0730R9L, RC2512FK-0730R9L) measure 0.250" L × 0.122" W (6.35mm × 3.10mm), and Samsung part (RC6432F30R9CS) measures 0.248" L × 0.126" W (6.30mm × 3.20mm). These variations remain within standard 2512 package tolerances and do not affect PCB footprint compatibility.

Q: Which substitute offers the best availability? A: RC6432F30R9CS (Samsung Electro-Mechanics) has the highest inventory at 1116 pieces. However, it lacks AEC-Q200 certification. For automotive applications, CRCW251230R9FKTG (Vishay Dale) offers 1068 pieces, though it is RoHS non-compliant. RMCF2512FT30R9 (Stackpole Electronics) at 1105 pieces provides active status with full ROHS3 compliance and AEC-Q200 certification.

Q: Can moisture-resistant variants be used interchangeably with standard variants? A: Yes, for electrical and thermal performance. AC2512FK-0730R9L, RC2512FK-0730R9L, and RHC2512FT30R9 incorporate moisture-resistant composition and are electrically equivalent to standard variants. Use moisture-resistant variants in applications with elevated humidity, condensation, or corrosive environments.

Q: Why is CRCW251230R9FKTG not recommended despite high inventory? A: CRCW251230R9FKTG is RoHS non-compliant and REACH-affected, making it unsuitable for new designs and many regulated markets. ROHS3-compliant alternatives with equivalent specifications are available.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message