ERG-2SJ111 Equivalent & Substitute Parts

Part Overview

The ERG-2SJ111 is a 110 Ohms ±5% 2W through-hole resistor with axial leads, manufactured by Panasonic Electronic Components. This metal oxide film resistor features flame-proof and safety characteristics, designed for applications requiring reliable performance across a wide temperature range from -55°C to 235°C.

The ERG-2SJ111 is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or repair requirements for systems utilizing this component.

Substiute Parts

ERG-2SJ111

Panasonic Electronic ComponentsIn Stock: 1168ERG-2SJ111 Datasheet

Current PartRFQ

ERG-2SJ111E

Panasonic Electronic ComponentsIn Stock: 2672ERG-2SJ111E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ERG-2SJ111 is determined by the following critical parameters:

• Resistance Value: 110 Ohms (exact match required)
• Tolerance: ±5% (exact match required)
• Power Rating: 2W (exact match required)
• Composition: Metal Oxide Film (exact match required)
• Package Configuration: Axial or axial with radial forming (compatible)
• Operating Temperature Range: -55°C to 235°C (exact match required)
• Temperature Coefficient: ±350ppm/°C (exact match required)
• Compliance: ROHS3 Compliant, REACH Unaffected (maintained)

The ERG-2SJ111E qualifies as a direct substitute based on identical electrical specifications and compliance certifications. The primary distinction is the radial-formed lead configuration option, which provides mechanical flexibility for board layout while maintaining all electrical and thermal characteristics.

Parameter Comparison

Engineering Selection Recommendations

The ERG-2SJ111E is a direct functional equivalent to the ERG-2SJ111. Both components maintain identical electrical performance, thermal characteristics, and regulatory compliance status (ROHS3 Compliant, REACH Unaffected).

Selection between these parts should be based on mechanical requirements:

• ERG-2SJ111: Standard axial lead configuration for through-hole applications with fixed lead geometry
• ERG-2SJ111E: Axial with radial-formed lead option, providing flexibility for board layout and component spacing optimization

Both parts are classified as obsolete. Availability should be confirmed with component suppliers prior to design finalization or procurement planning.

Frequently Asked Questions (FAQ)

Q: Can ERG-2SJ111E replace ERG-2SJ111 in existing designs?

A: Yes. The ERG-2SJ111E is electrically and thermally identical to the ERG-2SJ111. The radial-formed lead option does not affect electrical performance. Board layout and hole spacing must accommodate the lead configuration.

Q: What is the difference between axial and radial-formed leads?

A: Axial leads are straight and parallel. Radial-formed leads are bent outward from the component body. Both configurations maintain the same electrical characteristics and physical dimensions. Lead forming affects only mechanical placement and spacing on the PCB.

Q: Are both parts ROHS3 compliant?

A: Yes. Both ERG-2SJ111 and ERG-2SJ111E are ROHS3 Compliant and REACH Unaffected.

Q: What is the operating temperature range for these resistors?

A: Both parts operate from -55°C to 235°C with a temperature coefficient of ±350ppm/°C.

Q: Are these parts still in production?

A: Both parts are classified as obsolete. Availability is limited to existing inventory from authorized distributors.