ERA-6APB113V Equivalent & Substitute Parts

Part Overview

The ERA-6APB113V is a 11 kOhms ±0.1% thin film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This component is rated for automotive applications under AEC-Q200 standard with operating temperature range of -55°C to 155°C. The part is currently active in production with 4403 units in stock. Substitute parts are identified when design requirements demand improved tolerance specifications or when primary inventory becomes unavailable while maintaining electrical and mechanical compatibility.

Substiute Parts

ERA-6APB113V

Panasonic Electronic ComponentsIn Stock: 4428ERA-6APB113V Datasheet

Current PartRFQ

ERA-6ARW113V

Panasonic Electronic ComponentsIn Stock: 5743ERA-6ARW113V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERA-6APB113V is determined by the following critical parameters:

• Resistance value: Must be 11 kOhms
• Package type: Must be 0805 (2012 Metric)
• Power rating: Must be 0.125W (1/8W)
• Composition: Must be thin film
• Automotive compliance: Must maintain AEC-Q200 rating
• Operating temperature range: Must support -55°C to 155°C
• RoHS compliance: Must be ROHS3 compliant

The ERA-6ARW113V qualifies as a substitute because it maintains all critical electrical and mechanical parameters while offering improved tolerance specification (±0.05% versus ±0.1%) and lower temperature coefficient (±10ppm/°C versus ±15ppm/°C).

Parameter Comparison

Engineering Selection Recommendations

Both ERA-6APB113V and ERA-6ARW113V are active production components from Panasonic Electronic Components with full AEC-Q200 automotive compliance and ROHS3 certification. Selection between these parts depends on circuit tolerance requirements. The ERA-6APB113V with ±0.1% tolerance is suitable for general automotive applications. The ERA-6ARW113V with ±0.05% tolerance and ±10ppm/°C temperature coefficient is appropriate for precision analog circuits requiring tighter tolerance control. Both parts share identical package dimensions, power rating, and operating temperature range, ensuring direct mechanical and electrical interchangeability within their respective tolerance specifications.

Frequently Asked Questions (FAQ)

Q: Can ERA-6ARW113V replace ERA-6APB113V in existing designs?

A: Yes. The ERA-6ARW113V is mechanically and electrically compatible with ERA-6APB113V. Both components use the 0805 package, have identical resistance values and power ratings, and maintain the same operating temperature range. The ERA-6ARW113V offers improved tolerance (±0.05% versus ±0.1%), making it suitable for applications where the original part is specified.

Q: What are the key differences between these two parts?

A: The primary differences are tolerance specification and temperature coefficient. ERA-6APB113V has ±0.1% tolerance with ±15ppm/°C temperature coefficient, while ERA-6ARW113V has ±0.05% tolerance with ±10ppm/°C temperature coefficient. All other electrical and mechanical parameters are identical.

Q: Are both parts suitable for automotive applications?

A: Yes. Both ERA-6APB113V and ERA-6ARW113V carry AEC-Q200 automotive qualification and are rated for -55°C to 155°C operating temperature range.

Q: Do these parts require different handling or storage procedures?

A: No. Both parts have MSL 1 (Unlimited) moisture sensitivity level, indicating identical handling and storage requirements.

Q: Can these parts be used interchangeably on the same PCB assembly line?

A: Yes, provided the circuit design tolerances accommodate the specifications of the selected part. The identical 0805 package ensures mechanical compatibility with existing PCB layouts and pick-and-place equipment.