ERA-6APB112V Equivalent & Substitute Parts

Part Overview

The ERA-6APB112V is a 1.1 kOhms ±0.1% thin film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This component is rated for automotive applications under AEC-Q200 standard with a power rating of 0.125W (1/8W) and operating temperature range of -55°C to 155°C. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications, mechanical compatibility, and automotive qualification requirements.

Substiute Parts

ERA-6APB112V

Panasonic Electronic ComponentsIn Stock: 5557ERA-6APB112V Datasheet

Current PartRFQ

ERA-6ARB112V

Panasonic Electronic ComponentsIn Stock: 22610ERA-6ARB112V Datasheet

UpgradeRFQ

ERA-6ARW112V

Panasonic Electronic ComponentsIn Stock: 20436ERA-6ARW112V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERA-6APB112V are qualified based on the following criteria:

Mandatory Matching Parameters:

• Resistance value: 1.1 kOhms
• Package / Case: 0805 (2012 Metric)
• Power rating: 0.125W (1/8W)
• Composition: Thin Film
• Automotive rating: AEC-Q200
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Allowable Variations:

• Tolerance: May be equal or tighter (±0.1% or better)
• Temperature coefficient: May be equal or lower (±15ppm/°C or better)
• Manufacturer series: ERA-6A family variants

Two substitute parts meet these criteria with enhanced specifications in tolerance and temperature coefficient performance.

Parameter Comparison

Engineering Selection Recommendations

Both ERA-6ARB112V and ERA-6ARW112V are direct substitutes for ERA-6APB112V in automotive applications. All three parts maintain identical mechanical compatibility, power rating, and AEC-Q200 automotive qualification.

ERA-6ARB112V provides equivalent tolerance (±0.1%) with improved temperature coefficient (±10ppm/°C versus ±15ppm/°C), offering enhanced stability across the full operating temperature range while maintaining cost-effectiveness.

ERA-6ARW112V offers the tightest tolerance specification (±0.05%) combined with the lowest temperature coefficient (±10ppm/°C), suitable for precision circuit applications requiring superior accuracy and thermal stability.

All substitute parts carry ROHS3 compliance, unlimited moisture sensitivity level, and active production status, ensuring long-term availability and supply chain reliability.

Frequently Asked Questions (FAQ)

Q: Can ERA-6ARB112V or ERA-6ARW112V be used as direct replacements for ERA-6APB112V?

A: Yes. Both parts are direct substitutes. They share identical resistance value, power rating, package type, and AEC-Q200 automotive qualification. The substitute parts offer equal or improved tolerance and temperature coefficient specifications.

Q: What is the difference between the three parts?

A: The primary differences are tolerance and temperature coefficient. ERA-6APB112V has ±0.1% tolerance and ±15ppm/°C temperature coefficient. ERA-6ARB112V maintains ±0.1% tolerance but improves to ±10ppm/°C. ERA-6ARW112V provides the tightest tolerance at ±0.05% with ±10ppm/°C temperature coefficient.

Q: Are all three parts suitable for automotive applications?

A: Yes. All three parts are rated to AEC-Q200 automotive standard with identical operating temperature range (-55°C to 155°C) and ROHS3 compliance.

Q: Is the 0805 package compatible across all three parts?

A: Yes. All three parts use the 0805 (2012 Metric) package with identical dimensions and termination configuration, ensuring mechanical and electrical compatibility in PCB layouts.

Q: Which substitute should be selected for precision applications?

A: ERA-6ARW112V is recommended for precision applications due to its ±0.05% tolerance and ±10ppm/°C temperature coefficient, providing superior accuracy and thermal stability compared to the main part.

Q: Are there any compliance or certification differences?

A: No. All three parts maintain identical RoHS3 compliance, unlimited moisture sensitivity level (MSL 1), and active production status.