ERA-3APB162V Equivalent & Substitute Parts

Part Overview

The ERA-3APB162V is a 1.6 kOhms ±0.1% thin film chip resistor in 0603 (1608 Metric) package manufactured by Panasonic Electronic Components. This surface mount device is rated for automotive applications under AEC-Q200 standard with 0.1W power rating and operating temperature range of -55°C to 155°C. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications, mechanical compatibility, and automotive qualification requirements.

Key Parameters

Parameter	Specification
Resistance Value	1.6 kOhms
Tolerance	±0.1%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thin Film
Automotive Rating	AEC-Q200
Operating Temperature	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the ERA-3APB162V are qualified based on the following criteria:

Electrical Compatibility: All substitute parts maintain the same 1.6 kOhms resistance value, 0.1W power rating, and 0603 package footprint. Tolerance variations are permitted within the thin film resistor category.

Mechanical Compatibility: All parts share identical physical dimensions (0.063" L x 0.031" W / 1.60mm x 0.80mm) and maximum seated height (0.022" / 0.55mm), ensuring direct PCB footprint compatibility.

Automotive Qualification: All substitute parts carry AEC-Q200 certification, maintaining automotive-grade reliability standards.

Environmental Compliance: All parts are ROHS3 compliant with MSL 1 rating and REACH unaffected status.

The ERA-3APB162V has two identified substitutes: ERA-3ARB162V and ERA-3ARW162V. Both are Panasonic ERA-3A series thin film resistors with identical resistance and power specifications but differ in tolerance grade and packaging format.

Parameter Comparison

Parameter	ERA-3APB162V	ERA-3ARB162V	ERA-3ARW162V
Manufacturer	Panasonic Electronic Components	Panasonic Electronic Components	Panasonic Electronic Components
Series	ERA-3A	ERA-3A	ERA-3A
Resistance	1.6 kOhms	1.6 kOhms	1.6 kOhms
Tolerance	±0.1%	±0.1%	±0.05%
Power Rating	0.1W	0.1W	0.1W
Composition	Thin Film	Thin Film	Thin Film
Temperature Coefficient	±15ppm/°C	±10ppm/°C	±10ppm/°C
Operating Temperature	-55°C ~ 155°C	-55°C ~ 155°C	-55°C ~ 155°C
Package / Case	0603 (1608 Metric)	0603 (1608 Metric)	0603 (1608 Metric)
Size / Dimension	0.063" L x 0.031" W (1.60mm x 0.80mm)	0.063" L x 0.031" W (1.60mm x 0.80mm)	0.063" L x 0.031" W (1.60mm x 0.80mm)
Height - Seated (Max)	0.022" (0.55mm)	0.022" (0.55mm)	0.022" (0.55mm)
AEC-Q200 Rating	Yes	Yes	Yes
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Packaging Format	Tape & Reel (TR)	Tape & Reel (TR)	Cut Tape (CT) & Digi-Reel®
Product Status	Active	Active	Active

Engineering Selection Recommendations

All three parts—ERA-3APB162V, ERA-3ARB162V, and ERA-3ARW162V—are active production components with full AEC-Q200 automotive qualification and ROHS3 compliance. Direct substitution is supported at the PCB level due to identical package geometry and electrical ratings.

ERA-3ARB162V offers equivalent performance to ERA-3APB162V with improved temperature coefficient (±10ppm/°C versus ±15ppm/°C) while maintaining ±0.1% tolerance. This part is suitable for applications requiring enhanced thermal stability.

ERA-3ARW162V provides the highest tolerance grade at ±0.05% with equivalent temperature coefficient performance (±10ppm/°C). This part is specified for precision measurement and signal conditioning circuits where tighter resistance tolerance is required. Packaging differs as Cut Tape (CT) & Digi-Reel® format instead of standard Tape & Reel.

Selection between these parts depends on application tolerance requirements and packaging logistics. All three maintain identical mechanical compatibility and automotive certification status.

Frequently Asked Questions (FAQ)

Q: Can ERA-3ARB162V directly replace ERA-3APB162V on existing PCBs?

A: Yes. Both parts share identical 0603 package dimensions, footprint, and electrical specifications (1.6 kOhms, ±0.1%, 0.1W). The improved temperature coefficient of ERA-3ARB162V (±10ppm/°C) provides enhanced performance without requiring circuit redesign.

Q: What is the primary difference between ERA-3ARW162V and ERA-3APB162V?

A: ERA-3ARW162V features tighter tolerance (±0.05% versus ±0.1%) and improved temperature coefficient (±10ppm/°C versus ±15ppm/°C). Packaging differs: ERA-3ARW162V is supplied in Cut Tape (CT) & Digi-Reel® format while ERA-3APB162V uses standard Tape & Reel. Mechanical compatibility remains identical.

Q: Are all three parts AEC-Q200 qualified?

A: Yes. ERA-3APB162V, ERA-3ARB162V, and ERA-3ARW162V all carry AEC-Q200 automotive qualification and are suitable for automotive applications within the specified operating temperature range of -55°C to 155°C.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (Tape & Reel versus Cut Tape & Digi-Reel®) affects supply chain logistics and handling but does not alter electrical characteristics or performance. All parts are electrically equivalent within their specified tolerance grades.

Q: Which part should be selected for precision analog circuits?

A: ERA-3ARW162V is specified for applications requiring precision performance due to its ±0.05% tolerance and ±10ppm/°C temperature coefficient. This part is suitable for signal conditioning, measurement instrumentation, and precision reference circuits.

Q: Are moisture sensitivity levels identical across all three parts?

A: Yes. All three parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message