ERA-3AEB511V Equivalent & Substitute Parts

Part Overview

The ERA-3AEB511V is a 510 Ohm ±0.1% thin film chip resistor in 0603 (1608 Metric) package rated for 0.1W power dissipation. Manufactured by Panasonic Electronic Components, this component meets Automotive AEC-Q200 qualification and is ROHS3 compliant. The part is currently active in production with 4470 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements demand enhanced specifications, or when supply chain optimization requires alternative sourcing from qualified manufacturers.

Key Parameters

Parameter	Value
Resistance	510 Ohms
Tolerance	±0.1%
Power Rating	0.1W (1/10W)
Package	0603 (1608 Metric)
Composition	Thin Film
Operating Temperature	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERA-3AEB511V is determined by the following mandatory parameters:

Resistance value: 510 Ohms (exact match required)
Tolerance: ±0.1% or better (tighter tolerance acceptable)
Package: 0603 (1608 Metric) form factor
Composition: Thin film construction
Automotive qualification: AEC-Q200 certification
RoHS compliance: ROHS3 compliant
Moisture sensitivity: MSL 1 or better

Substitute parts are grouped into two categories: upgrade substitutes with enhanced specifications and direct substitutes with equivalent or superior electrical characteristics. All listed substitutes maintain mechanical and electrical compatibility within the specified parameters.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Height Max (mm)	AEC-Q200	Features
ERA-3AEB511V	Panasonic	510 Ω	±0.1%	0.1	±25	-55 ~ 155	0.55	Yes	Thin Film
ERA-3APB511V	Panasonic	510 Ω	±0.1%	0.1	±15	-55 ~ 155	0.55	Yes	Thin Film
RG1608N-511-W-T1	Susumu	510 Ω	±0.05%	0.1	±10	-55 ~ 155	0.50	Yes	Anti-Sulfur, Thin Film
RG1608P-511-B-T5	Susumu	510 Ω	±0.1%	0.1	±25	-55 ~ 155	0.50	Yes	Anti-Sulfur, Thin Film
RNCF0603BTE510R	Stackpole Electronics	510 Ω	±0.1%	0.167	±25	-55 ~ 155	0.55	Yes	Thin Film
RT0603BRD07510RL	YAGEO	510 Ω	±0.1%	0.1	±25	-55 ~ 155	0.55	No	Thin Film
TNPW0603510RBEEA	Vishay Dale	510 Ω	±0.1%	0.21	±25	-55 ~ 175	0.55	Yes	Anti-Sulfur, Moisture Resistant, Thin Film
RG1608N-511-B-T5	Susumu	510 Ω	±0.1%	0.1	±10	-55 ~ 155	0.50	Yes	Anti-Sulfur, Thin Film

Engineering Selection Recommendations

All listed substitute parts maintain ROHS3 compliance and MSL 1 moisture sensitivity rating, ensuring compatibility with standard manufacturing and storage protocols.

For applications requiring AEC-Q200 automotive qualification as a mandatory requirement, the following parts are qualified: ERA-3APB511V, RG1608N-511-W-T1, RG1608P-511-B-T5, RNCF0603BTE510R, TNPW0603510RBEEA, and RG1608N-511-B-T5. The RT0603BRD07510RL does not carry AEC-Q200 certification and is suitable only for non-automotive applications.

Parts with enhanced temperature coefficient specifications (±10ppm/°C or ±15ppm/°C) provide improved stability across the operating temperature range compared to the standard ±25ppm/°C specification. The TNPW0603510RBEEA offers extended operating temperature range to 175°C and higher power dissipation (0.21W), suitable for thermal margin applications.

Frequently Asked Questions (FAQ)

Q: Can I substitute ERA-3AEB511V with RT0603BRD07510RL?

A: RT0603BRD07510RL matches the electrical specifications and package form factor but lacks AEC-Q200 automotive qualification. Substitution is permissible only in non-automotive applications where automotive certification is not a design requirement.

Q: What is the difference between ERA-3APB511V and ERA-3AEB511V?

A: Both parts are manufactured by Panasonic with identical resistance, tolerance, power rating, and package specifications. ERA-3APB511V features a lower temperature coefficient (±15ppm/°C versus ±25ppm/°C), providing improved frequency stability and reduced drift over temperature variations.

Q: Is TNPW0603510RBEEA a direct substitute?

A: TNPW0603510RBEEA is mechanically and electrically compatible but differs in power rating (0.21W versus 0.1W) and maximum operating temperature (175°C versus 155°C). These enhancements make it suitable as an upgrade substitute for applications requiring higher thermal margin or extended temperature operation.

Q: Do all substitute parts fit the same PCB footprint?

A: All listed parts use the 0603 (1608 Metric) package. Physical dimensions are within acceptable tolerance for standard 0603 footprints. Height variations (0.50mm to 0.55mm maximum seated height) are within typical PCB assembly clearance specifications.

Q: Which substitute offers the best tolerance specification?

A: RG1608N-511-W-T1 provides ±0.05% tolerance, which is tighter than the ERA-3AEB511V specification of ±0.1%. This enhanced tolerance is suitable for precision measurement and signal conditioning circuits requiring reduced component variation.

Q: Are all substitutes available in the same packaging format?

A: All listed parts are supplied in Tape & Reel (TR) packaging, matching the original part's packaging specification for automated assembly compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message