ERA-3AEB2103V Equivalent & Substitute Parts

Part Overview

The ERA-3AEB2103V is a 210 kOhms ±0.1% thin film chip resistor in 0603 (1608 Metric) package manufactured by Panasonic Electronic Components. This precision resistor is rated for 0.1W power dissipation and meets automotive AEC-Q200 qualification standards. The part is currently in active production status with 5385 units available in inventory. Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and compliance certifications align with the original component requirements.

Substiute Parts

ERA-3AEB2103V

Panasonic Electronic ComponentsIn Stock: 5495ERA-3AEB2103V Datasheet

Current PartRFQ

RG1608P-2103-B-T5

SusumuIn Stock: 6010RG1608P-2103-B-T5 Datasheet

DirectRFQ

RT0603BRD07210KL

YAGEOIn Stock: 7469RT0603BRD07210KL Datasheet

DirectRFQ

TNPW0603210KBEEA

Vishay DaleIn Stock: 16113TNPW0603210KBEEA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment of the following parameters:

• Resistance value: 210 kOhms
• Tolerance: ±0.1%
• Package: 0603 (1608 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Compliance: ROHS3, AEC-Q200
• Moisture Sensitivity: MSL 1

All identified substitute parts meet these core electrical and mechanical requirements. Variations in power rating, operating temperature upper limit, and physical dimensions within acceptable tolerances do not disqualify substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

All four parts are active production components with ROHS3 compliance and MSL 1 rating. Three of the four parts (ERA-3AEB2103V, RG1608P-2103-B-T5, and TNPW0603210KBEEA) carry AEC-Q200 automotive qualification. The RT0603BRD07210KL from YAGEO meets all electrical and mechanical parameters but does not include AEC-Q200 certification.

For applications requiring automotive qualification, selection should be limited to ERA-3AEB2103V, RG1608P-2103-B-T5, or TNPW0603210KBEEA. The TNPW0603210KBEEA offers higher power rating (0.21W versus 0.1W) and extended operating temperature range (-55°C ~ 175°C versus -55°C ~ 155°C), providing additional design margin in thermally demanding applications.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07210KL be used as a direct substitute for ERA-3AEB2103V in automotive applications?

A: No. While RT0603BRD07210KL meets all electrical specifications and mechanical compatibility requirements, it does not carry AEC-Q200 automotive qualification. Use only in non-automotive applications or where automotive qualification is not mandated.

Q: What is the difference between the 0.1W and 0.21W power ratings?

A: TNPW0603210KBEEA is rated for 0.21W continuous power dissipation, while ERA-3AEB2103V, RG1608P-2103-B-T5, and RT0603BRD07210KL are rated for 0.1W. The higher power rating provides additional thermal margin and does not affect electrical performance in circuits designed for 0.1W operation.

Q: Are all substitute parts available in the same packaging format?

A: ERA-3AEB2103V and RT0603BRD07210KL are supplied in Tape & Reel (TR) packaging. TNPW0603210KBEEA is supplied in Cut Tape (CT) & Digi-Reel® packaging. RG1608P-2103-B-T5 is supplied in Tape & Reel (TR) packaging. Verify packaging compatibility with assembly equipment requirements.

Q: Do all parts meet the same temperature coefficient specification?

A: Yes. All four parts specify ±25ppm/°C temperature coefficient, ensuring equivalent frequency stability and thermal performance characteristics.

Q: Which substitute offers the best inventory availability?

A: TNPW0603210KBEEA has the highest inventory level at 16068 units, followed by RT0603BRD07210KL at 7432 units, RG1608P-2103-B-T5 at 5901 units, and ERA-3AEB2103V at 5385 units.