Equivalent & Substitute Parts for ERA-2ARB5601X

Part Overview

The ERA-2ARB5601X is a 5.6 kOhms ±0.1% thin film chip resistor in 0402 (1005 Metric) package rated for automotive applications under AEC-Q200 standard. This component is actively produced and widely used in precision analog circuits requiring tight tolerance specifications. Substitute parts may be required due to inventory constraints, packaging format preferences, or supply chain optimization while maintaining identical electrical and mechanical performance.

Substiute Parts

ERA-2ARB5601X

Panasonic Electronic ComponentsIn Stock: 823ERA-2ARB5601X Datasheet

Current PartRFQ

ERA-2ARB562X

Panasonic Electronic ComponentsIn Stock: 19985ERA-2ARB562X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The ERA-2ARB562X qualifies as a direct substitute for ERA-2ARB5601X based on the following critical parameters:

• Identical resistance value: 5.6 kOhms
• Identical tolerance: ±0.1%
• Identical power rating: 0.063W (1/16W)
• Identical package: 0402 (1005 Metric)
• Identical composition: Thin Film
• Identical temperature coefficient: ±10ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical automotive certification: AEC-Q200
• Identical RoHS and REACH compliance status

The only difference between these parts is the packaging format: ERA-2ARB5601X is supplied in standard packaging, while ERA-2ARB562X is supplied in Tape & Reel (TR) format. This distinction affects logistics and assembly processes but does not alter electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

Both ERA-2ARB5601X and ERA-2ARB562X are active products from Panasonic Electronic Components with identical electrical specifications and automotive AEC-Q200 certification. Selection between these parts should be based on packaging requirements:

• ERA-2ARB5601X: Use when standard packaging format is required or specified in procurement documentation.
• ERA-2ARB562X: Use when Tape & Reel format is required for automated assembly processes or when higher inventory availability is a factor (19,915 pcs vs. 747 pcs in stock).

Both parts maintain ROHS3 compliance and REACH unaffected status. The MSL 1 rating indicates unlimited shelf life under standard storage conditions for both variants.

Frequently Asked Questions (FAQ)

Q: Can ERA-2ARB562X be used as a direct replacement for ERA-2ARB5601X in circuit design?

A: Yes. Both parts have identical electrical and mechanical specifications. The only difference is packaging format (Tape & Reel vs. standard). Circuit performance will be identical.

Q: What is the significance of the packaging difference between these parts?

A: Packaging format affects supply chain logistics and assembly processes. Tape & Reel (TR) format is optimized for automated pick-and-place assembly, while standard packaging may be used for manual assembly or different distribution channels. Electrical performance is unaffected.

Q: Are both parts suitable for automotive applications?

A: Yes. Both ERA-2ARB5601X and ERA-2ARB562X carry AEC-Q200 automotive qualification and operate across the -55°C ~ 155°C temperature range required for automotive environments.

Q: What does the ±0.1% tolerance specification mean for circuit design?

A: The ±0.1% tolerance indicates that the actual resistance value will be within 5.6 kOhms ± 5.6 Ohms. This tight tolerance is suitable for precision analog circuits, reference networks, and applications requiring high accuracy.

Q: Is there any difference in reliability or failure rate between these parts?

A: No. Both parts are from the same ERA-2A series, manufactured by Panasonic, and share identical composition, temperature coefficient, and ratings. Reliability characteristics are equivalent.

Q: Can these parts be stored indefinitely?

A: Both parts have MSL 1 (Unlimited) rating, indicating no moisture sensitivity limitations under standard storage conditions. Shelf life is not restricted by moisture sensitivity considerations.