ERA-2ARB1502X Equivalent & Substitute Parts

Part Overview

The ERA-2ARB1502X is a 15 kOhms ±0.1% thin film chip resistor in 0402 (1005 Metric) package rated for 0.063W (1/16W) power dissipation. This component is designed for automotive applications and meets AEC-Q200 qualification standards. The part is currently in active production status with 788 pieces available in stock. Substitute parts are identified when packaging configuration or inventory availability requires alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

ERA-2ARB1502X

Panasonic Electronic ComponentsIn Stock: 891ERA-2ARB1502X Datasheet

Current PartRFQ

ERA-2ARB153X

Panasonic Electronic ComponentsIn Stock: 18647ERA-2ARB153X Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERA-2ARB1502X is determined by strict equivalence across the following critical parameters:

• Resistance value: 15 kOhms
• Tolerance: ±0.1%
• Power rating: 0.063W (1/16W)
• Package: 0402 (1005 Metric)
• Composition: Thin Film
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Compliance: ROHS3, REACH Unaffected

The identified substitute part ERA-2ARB153X maintains all electrical and mechanical parameters identical to the main part. The only difference is packaging configuration (Tape & Reel versus standard packaging), which does not affect component performance or circuit compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both ERA-2ARB1502X and ERA-2ARB153X are active production components from Panasonic Electronic Components with identical electrical specifications and automotive AEC-Q200 qualification. Selection between these parts is based on packaging and inventory requirements:

• ERA-2ARB1502X: Standard packaging format, 788 pieces in stock
• ERA-2ARB153X: Tape & Reel packaging format, 18,560 pieces in stock

Both parts satisfy ROHS3 compliance and REACH requirements. The choice between these substitutes depends on assembly process requirements and volume needs rather than electrical performance or reliability characteristics.

Frequently Asked Questions (FAQ)

Q: Can ERA-2ARB153X replace ERA-2ARB1502X in circuit design?

A: Yes. Both parts are electrically and mechanically identical with matching resistance value (15 kOhms), tolerance (±0.1%), power rating (0.063W), package (0402), and automotive qualification (AEC-Q200). The only difference is packaging format.

Q: What is the difference between the two part numbers?

A: The ERA-2ARB1502X uses standard packaging, while ERA-2ARB153X is supplied in Tape & Reel format. This affects handling and assembly processes but not component performance or circuit compatibility.

Q: Are both parts suitable for automotive applications?

A: Yes. Both ERA-2ARB1502X and ERA-2ARB153X carry AEC-Q200 automotive qualification and operate across the identical temperature range of -55°C to 155°C.

Q: Do these parts have the same reliability ratings?

A: Yes. Both parts share identical composition (thin film), temperature coefficient (±10ppm/°C), moisture sensitivity level (1 - Unlimited), and compliance certifications (ROHS3, REACH Unaffected).

Q: Which part should I select for high-volume production?

A: ERA-2ARB153X in Tape & Reel format is typically preferred for high-volume automated assembly, with significantly higher inventory availability (18,560 pieces versus 788 pieces).