ERA-1ARB2260C Equivalent & Substitute Parts

Part Overview

The ERA-1ARB2260C is a 226 Ohm ±0.1% thin film chip resistor in 0201 package (0.60mm x 0.30mm) rated at 0.05W (1/20W) with a temperature coefficient of ±10ppm/°C. This component is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and production continuity. The substitute part ERA-1AEB2260C provides electrical and mechanical compatibility while offering active product status.

Substiute Parts

ERA-1ARB2260C

Panasonic Electronic ComponentsIn Stock: 927ERA-1ARB2260C Datasheet

Current PartRFQ

ERA-1AEB2260C

Panasonic Electronic ComponentsIn Stock: 1018ERA-1AEB2260C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between ERA-1ARB2260C and ERA-1AEB2260C is valid based on the following matching parameters:

• Resistance value: 226 Ohms (identical)
• Tolerance: ±0.1% (identical)
• Power rating: 0.05W / 1/20W (identical)
• Package type: 0201 (0603 Metric) (identical)
• Physical dimensions: 0.024" L x 0.012" W / 0.60mm x 0.30mm (identical)
• Height - Seated (Max): 0.010" (0.26mm) (identical)
• Composition: Thin Film (identical)
• Operating temperature range: -55°C ~ 155°C (identical)
• RoHS compliance: ROHS3 Compliant (identical)
• Moisture sensitivity: MSL 1 (Unlimited) (identical)

The primary difference is the temperature coefficient (±10ppm/°C vs. ±25ppm/°C) and product status (obsolete vs. active). Both parameters remain within acceptable substitution criteria for this resistor category.

Parameter Comparison

Engineering Selection Recommendations

ERA-1AEB2260C is the direct substitute for ERA-1ARB2260C. Selection of the substitute is justified by:

• Identical electrical specifications (resistance, tolerance, power rating)
• Identical mechanical compatibility (package, dimensions, terminations)
• Identical environmental compliance (RoHS3, MSL 1)
• Active product status ensuring long-term availability and supply chain continuity
• Tape & Reel packaging suitable for automated assembly processes

The temperature coefficient difference (±25ppm/°C vs. ±10ppm/°C) represents a relaxation of the original specification. Applications requiring the tighter ±10ppm/°C coefficient should evaluate circuit-level impact before substitution.

Frequently Asked Questions (FAQ)

Q: Can ERA-1AEB2260C be used as a direct replacement for ERA-1ARB2260C?

A: Yes. Both parts share identical resistance, tolerance, power rating, package type, and physical dimensions. The substitute is electrically and mechanically compatible for PCB assembly and soldering processes.

Q: What is the difference between these two parts?

A: The primary differences are product status (obsolete vs. active), packaging format (standard vs. Tape & Reel), and temperature coefficient (±10ppm/°C vs. ±25ppm/°C). The temperature coefficient difference may be significant in precision analog circuits operating across wide temperature ranges.

Q: Is the 0201 package compatible with standard PCB assembly equipment?

A: The 0201 package (0.60mm x 0.30mm) is an ultra-miniature format requiring specialized pick-and-place equipment and soldering processes. Verify equipment capability before production implementation.

Q: Are both parts RoHS compliant?

A: Yes. Both ERA-1ARB2260C and ERA-1AEB2260C are ROHS3 compliant and suitable for applications requiring RoHS certification.

Q: What does MSL 1 (Unlimited) mean?

A: Moisture Sensitivity Level 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling.