ERA-14EB331U Equivalent & Substitute Parts

Part Overview

The ERA-14EB331U is a 330 Ohm ±0.1% thin film chip resistor manufactured by Panasonic Electronic Components in 1210 (3225 Metric) package format with 0.25W power rating. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement. The ERA-14 series represents a legacy product line, and active alternatives from current manufacturers provide functional equivalence with enhanced availability and extended product lifecycles.

Key Parameters

Parameter	Value
Resistance	330 Ohms
Tolerance	±0.1%
Power Rating	0.25W (1/4W)
Package	1210 (3225 Metric)
Composition	Thin Film
Temperature Coefficient	±25ppm/°C
Operating Temperature Range	-55°C ~ 125°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters: resistance value, tolerance, package format, and composition type. All listed substitute parts maintain 330 Ohm resistance with ±0.1% tolerance and thin film construction. Package compatibility is categorized as follows:

Same Package (1210): Parts maintaining identical 1210 (3225 Metric) package dimensions are direct mechanical and electrical substitutes. These include RNCF1210BKE330R, RNCF1210BTE330R, RT1210BRD07330RL, RT1210WRD07330RL, TNPW1210330RBEEA, and TNPW1210330RBEEN.

Alternate Package (1206): The ERA-8AEB331V uses 1206 (3216 Metric) package, which is mechanically smaller but electrically equivalent for the specified resistance and tolerance. This substitution requires PCB layout verification.

Power Rating Variations: Substitute parts with higher power ratings (0.333W or 0.5W) provide enhanced thermal performance while maintaining electrical specifications. These are suitable for applications where the original 0.25W rating is marginal.

Temperature Range Considerations: Substitute parts rated to -55°C ~ 155°C extend the upper operating limit by 30°C compared to the ERA-14EB331U specification of -55°C ~ 125°C.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Status	RoHS
ERA-14EB331U	Panasonic	330Ω	±0.1%	0.25	1210	±25ppm/°C	-55~125°C	Obsolete	ROHS3
ERA-8AEB331V	Panasonic	330Ω	±0.1%	0.25	1206	±25ppm/°C	-55~155°C	Active	ROHS3
RNCF1210BKE330R	Stackpole	330Ω	±0.1%	0.333	1210	±25ppm/°C	-55~155°C	Active	ROHS3
RNCF1210BTE330R	Stackpole	330Ω	±0.1%	0.333	1210	±25ppm/°C	-55~155°C	Active	ROHS3
RT1210BRD07330RL	YAGEO	330Ω	±0.1%	0.25	1210	±25ppm/°C	-55~125°C	Active	ROHS3
RT1210WRD07330RL	YAGEO	330Ω	±0.05%	0.25	1210	±25ppm/°C	-55~125°C	Active	ROHS3
TNPW1210330RBEEA	Vishay Dale	330Ω	±0.1%	0.5	1210	±25ppm/°C	-55~155°C	Active	ROHS3
TNPW1210330RBEEN	Vishay Dale	330Ω	±0.1%	0.5	1210	±25ppm/°C	-55~155°C	Active	ROHS3
TNPW1210330RBETA	Vishay Dale	330Ω	±0.1%	0.333	1210	±25ppm/°C	-55~125°C	Active	Non-compliant

Engineering Selection Recommendations

Primary Substitutes (Same Package, Active Status): RT1210BRD07330RL, RNCF1210BKE330R, and RNCF1210BTE330R are recommended as direct replacements. All three maintain 1210 package compatibility, active product status, and ROHS3 compliance. RT1210BRD07330RL matches the original 0.25W power rating and -55°C ~ 125°C temperature range. RNCF variants provide extended temperature operation to 155°C with increased power rating (0.333W), suitable for applications requiring enhanced thermal margin.

Enhanced Tolerance Alternative: RT1210WRD07330RL offers ±0.05% tolerance, providing tighter resistance accuracy than the original ±0.1% specification while maintaining identical package and power rating. This part is appropriate for precision analog circuits where tolerance stack-up is critical.

Higher Power Rating Options: TNPW1210330RBEEA and TNPW1210330RBEEN provide 0.5W power rating with extended temperature range (-55°C ~ 155°C) and automotive AEC-Q200 qualification. These are suitable for applications with elevated power dissipation or thermal stress.

Alternate Package Consideration: ERA-8AEB331V maintains Panasonic manufacturing continuity with active product status and extended temperature range. The 1206 package is mechanically smaller; PCB layout compatibility must be confirmed before selection.

Avoid: TNPW1210330RBETA is RoHS non-compliant and REACH-affected, making it unsuitable for new designs or applications with regulatory compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB331V (1206 package) be used as a direct replacement for ERA-14EB331U (1210 package)?

A: ERA-8AEB331V is electrically equivalent with identical resistance, tolerance, and temperature coefficient. However, the 1206 package is mechanically smaller than 1210. Substitution requires PCB layout verification to confirm pad spacing and component placement compatibility. The part is not a drop-in replacement without layout modification.

Q: What is the difference between RNCF1210BKE330R and RNCF1210BTE330R?

A: Both parts are electrically and mechanically identical with 330Ω resistance, ±0.1% tolerance, 0.333W power rating, and 1210 package. The difference lies in packaging format and supplier designation. Both are suitable substitutes for the ERA-14EB331U.

Q: Why do some substitutes have higher power ratings (0.333W or 0.5W)?

A: Higher power ratings indicate greater thermal capacity and lower temperature rise under load. These parts are suitable for applications where the original 0.25W rating provides insufficient margin or where circuit conditions approach the power dissipation limit. Higher power rating does not affect electrical performance at lower power levels.

Q: Is RT1210WRD07330RL compatible with designs specified for ±0.1% tolerance?

A: Yes. RT1210WRD07330RL provides ±0.05% tolerance, which is tighter than the ±0.1% specification. This part exceeds the original tolerance requirement and is fully compatible. It is appropriate for applications where tighter tolerance improves circuit performance.

Q: Are all substitute parts ROHS3 compliant?

A: All recommended substitutes except TNPW1210330RBETA are ROHS3 compliant. TNPW1210330RBETA is RoHS non-compliant and should not be used in new designs or applications with regulatory compliance mandates.

Q: What is the significance of AEC-Q200 qualification on some substitute parts?

A: AEC-Q200 is an automotive industry qualification standard. Parts bearing this rating (RNCF series, TNPW e3 series) have undergone additional reliability testing for automotive applications. These parts are suitable for both automotive and general industrial use.

Q: Can TNPW1210330RBEEA and TNPW1210330RBEEN be used interchangeably?

A: Yes. Both parts are electrically and mechanically identical with 330Ω resistance, ±0.1% tolerance, 0.5W power rating, and 1210 package. Both carry AEC-Q200 qualification and extended temperature range. The difference is packaging designation; both are suitable substitutes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message