EPC2010C Equivalent & Substitute Parts

Part Overview

The EPC2010C is an N-Channel GaNFET (Gallium Nitride Field Effect Transistor) rated for 200V drain-to-source voltage with 22A continuous drain current at 25°C. This device is supplied as a surface mount die in cut tape and Digi-Reel® packaging. The EPC2010C carries a product status of "Not For New Designs," indicating that EPC has transitioned this component out of active development. For applications requiring continued support, active product alternatives, or different performance characteristics, substitute components must be evaluated based on electrical and mechanical compatibility within the GaNFET technology family.

Substiute Parts

EPC2010C

EPCIn Stock: 17649EPC2010C Datasheet

Current PartRFQ

EPC2207

EPCIn Stock: 18825EPC2207 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the EPC2010C is determined by strict alignment of electrical and mechanical parameters within the GaNFET technology platform. The following criteria establish substitution validity:

Mandatory Matching Parameters:

• Drain to Source Voltage (Vdss): 200V
• FET Type: N-Channel
• Technology: GaNFET (Gallium Nitride)
• Mounting Type: Surface Mount
• Package / Case: Die
• Gate-Source Voltage Range (Vgs): +6V, -4V
• Operating Temperature Range: -40°C to 150°C (TJ)

Allowable Variation Parameters:

• Current - Continuous Drain (Id) @ 25°C: May vary based on application requirements
• Rds On (Max): May vary; lower values indicate improved performance
• Gate Charge (Qg): May vary; lower values indicate faster switching
• Input Capacitance (Ciss): May vary; affects gate drive requirements

The EPC2207 qualifies as a substitute based on matching all mandatory parameters. The EPC2207 operates at 14A continuous drain current, which represents a lower current rating than the EPC2010C's 22A specification. This substitution is valid for applications where the required drain current does not exceed 14A at 25°C.

Parameter Comparison

Engineering Selection Recommendations

EPC2010C Status: Not For New Designs

The EPC2010C is designated as "Not For New Designs" by the manufacturer. This status indicates that EPC has concluded active development and support for this component. Existing inventory remains available; however, new designs should not incorporate this part number.

EPC2207 Status: Active

The EPC2207 carries an "Active" product status, indicating ongoing manufacturer support, continued availability, and inclusion in current product development roadmaps. This component is suitable for new designs and applications requiring long-term supply assurance.

Substitution Basis:

The EPC2207 qualifies as a direct substitute for the EPC2010C in applications where the continuous drain current requirement does not exceed 14A at 25°C. Both devices share identical voltage ratings (200V Vdss), gate-source voltage specifications (+6V, -4V), operating temperature range (-40°C to 150°C), and compliance certifications (ROHS3, REACH Unaffected). Both are supplied as surface mount dies with MSL 1 (Unlimited) moisture sensitivity.

Compliance Considerations:

Both the EPC2010C and EPC2207 meet ROHS3 compliance and are REACH Unaffected. No regulatory barriers exist to substitution from an environmental or hazardous substance perspective.

Current Rating Consideration:

The EPC2207 operates at 14A continuous drain current, compared to the EPC2010C's 22A rating. Applications requiring drain currents between 14A and 22A cannot use the EPC2207 as a direct substitute without circuit redesign or parallel device configuration.

Frequently Asked Questions (FAQ)

Q: Can the EPC2207 replace the EPC2010C in all applications?

A: The EPC2207 qualifies as a substitute only in applications where the required continuous drain current at 25°C does not exceed 14A. If your circuit requires drain currents between 14A and 22A, the EPC2207 cannot serve as a direct one-to-one replacement without circuit modification.

Q: What are the key electrical differences between these two parts?

A: The primary difference is continuous drain current: EPC2010C is rated for 22A, while EPC2207 is rated for 14A. Secondary differences include Rds On (25 mOhm vs. 22 mOhm), Gate Charge (5.3 nC vs. 5.9 nC), and Input Capacitance (540 pF vs. 600 pF). All other electrical parameters, including voltage ratings and gate-source specifications, are identical.

Q: Are the packaging and mounting requirements the same?

A: Yes. Both the EPC2010C and EPC2207 are supplied as surface mount dies with identical moisture sensitivity levels (MSL 1, Unlimited). The EPC2010C is available in Cut Tape (CT) and Digi-Reel® packaging, while the EPC2207 is supplied in Tape & Reel (TR) packaging. Both are compatible with standard die-level assembly processes.

Q: Why is the EPC2010C marked "Not For New Designs"?

A: This designation indicates that EPC has transitioned the EPC2010C out of active product development. While existing inventory remains available for legacy applications, new circuit designs should incorporate the EPC2207 or other active GaNFET products to ensure long-term supply continuity and access to manufacturer technical support.

Q: Are there any thermal or operating temperature differences?

A: No. Both devices operate across the identical temperature range of -40°C to 150°C (TJ). Thermal performance differences, if any, would be determined by the specific Rds On values and die size, which are not provided in the available specifications.

Q: What compliance certifications apply to both parts?

A: Both the EPC2010C and EPC2207 are ROHS3 Compliant and REACH Unaffected. No regulatory restrictions apply to substitution from an environmental or hazardous substance perspective.

Q: Can I use multiple EPC2207 devices in parallel to achieve higher current ratings?

A: Parallel operation of GaNFET devices requires careful circuit design, including matched gate drive signals and current-sharing networks. This approach is outside the scope of direct substitution and requires detailed application engineering analysis.